If you are experiencing the issue of no sound from your computer, you are not alone. This is a common glitch that can have several causes. PHP editor Xiaoxin brings you the most common computer no sound troubleshooting guide, explaining in detail the various reasons that may cause this problem, and providing you with step-by-step solutions. Read on to learn how to diagnose and resolve the no-sound issue on your computer and restore a smooth audio experience.
When you find that the computer has no sound, you may feel confused and annoyed. However, the causes vary and there are some simple ways to troubleshoot.
First make sure the volume settings on your computer are correct. You can click the volume icon on the taskbar to check whether the volume is muted or too low. In addition, you can also enter the control panel or system settings to check the volume and sound device settings.
If you are using external speakers or headphones, check whether their connections are normal. Sometimes, the plug of the speaker or headphone is not inserted firmly, which can also cause no sound problem.
Outdated or damaged audio drivers may also be one of the reasons why your computer has no sound. You can try updating the driver, or uninstall and reinstall the latest version of the driver.
If none of the above methods can solve the problem, it may be caused by hardware failure. At this time, it is recommended to contact professional maintenance personnel for inspection and repair.
I hope the above method can help you solve the problem of no sound on your computer and restore normal audio output to your computer.
Thanks for reading! I hope these methods can help you solve the problem of no sound on your computer.
1. CPU temperature is too high leading to crash: This problem is most likely caused by CPU overclocking, abnormal fan operation, poor heat dissipation installation, or uneven application of heat dissipation silicone grease on the CPU base. The editor here recommends disassembling the case and checking whether the fan rotates normally. If not, it is recommended to replace it with a fan with better performance. Then check whether the heat sink is firmly installed and in close contact with the CPU. Also check whether the CPU surface is coated with thermal grease or whether it is evenly applied. Finally, if the user has overclocked the CPU before, it is best to lower the frequency or do a good job of cooling the CPU. If this operation is not performed, the CPU will easily be burned!
2. The fan in the computer case is noisy: A friend sent a private message to the editor before asking what should I do if the computer case is noisy? In fact, if the wind direction noise of the chassis is loud, it is most likely caused by long-term use and lack of lubricating oil to the fan, which in turn causes the fan bearings to dry up and cause high friction. To solve this problem, we only need to add some lubricant to the fan bearing.
3. The computer automatically shuts down or restarts: The computer automatically shuts down or restarts for unknown reasons? Of course, it is possible that the CPU temperature is too high, the power supply fails, the motherboard temperature is too high and the automatic protection function or viruses are enabled, etc. When this fault occurs, we must first confirm whether the CPU's heat dissipation is normal, open the case and check whether the fan blades are operating normally, and then enter the BIOS to check the fan speed and CPU temperature. If there is a problem with the fan, we need to maintain it. If the CPU has been overclocked, it is recommended to restore it to its original frequency or replace it with a high-power fan. There is another situation. If the computer has been used for a long time, the power supply may be aged or damaged. If this is the case, it is recommended to replace the power supply with a new one as soon as possible to avoid burning out other hardware.
4. The impact of BIOS settings on CPU overclocking: The most common danger of CPU overclocking in BIOS settings is heat. When computer components are run higher than rated parameters, it will generate more heat. If the heat dissipation is insufficient, the system will It may overheat, causing the computer to malfunction. In the "Frequency and Voltage Settings" option in the BIOS, there is an option called "Spread Spectrum". Setting it to "Enabled" can disable overclocking.
5. Turning off the second-level cache causes the computer to run too slowly: When the CPU reads data, it must read from the cache, which greatly slows down the speed of the CPU reading data. In the BIOS settings, we can check whether the CPU Level2 Cache option is set to Disabled. If so, change it to Enable, save and exit to solve the problem.
No sound from the computer may be caused by many reasons, including but not limited to: volume adjustment, driver problems, hardware failure, audio settings, etc.
First make sure the volume is not muted or turned down. The volume icon in the lower right corner can be used to adjust the volume, and you can also enter the sound options in the system settings to adjust it.
드라이버가 없거나 오래된 경우 오디오가 제대로 작동하지 않을 수 있습니다. 장치 관리자에서 오디오 장치를 확인할 수 있습니다. 드라이버 문제가 있는 경우 최신 드라이버를 다운로드하여 설치해야 합니다.
소프트웨어 설정에 문제가 없다면 오디오 인터페이스 결함이나 스피커 손상 때문일 수 있습니다. 다른 스피커나 헤드폰을 연결해 보거나 오디오 인터페이스를 다른 장치에 연결하여 하드웨어 문제인지 확인할 수 있습니다.
일부 운영 체제 설정은 기본 장치 설정, 오디오 형식 등과 같은 오디오 문제를 일으킬 수 있습니다. 이러한 옵션은 시스템 설정에서 확인하고 필요한 경우 조정할 수 있습니다.
위의 방법으로도 문제가 해결되지 않으면 문제를 더 깊이 분석하고 해결할 수 있는 전문 컴퓨터 수리 담당자의 도움을 받는 것이 좋습니다.
이 기사를 읽어주셔서 감사합니다. 컴퓨터에서 소리가 나지 않는 문제를 해결하는 데 도움이 되기를 바랍니다.
컴퓨터 스피커에서 소리가 나지 않으면 먼저 연결 케이블이 제대로 연결되어 있는지 확인하세요. 스피커의 전원 코드와 오디오 케이블이 컴퓨터의 오디오 출력 인터페이스에 올바르게 연결되어 있는지 확인하십시오.
두 번째로, 컴퓨터 볼륨 설정을 확인하여 볼륨이 음소거되거나 꺼져 있지 않은지 확인하세요. 컴퓨터 바탕 화면 오른쪽 하단에 있는 볼륨 아이콘을 마우스 오른쪽 버튼으로 클릭하고 "볼륨 믹서 열기"를 선택하면 각 오디오 채널의 볼륨 설정을 확인할 수 있습니다.
또한 컴퓨터 오디오 드라이버가 제대로 작동하는지 확인하세요. 장치 관리자에서 오디오 장치에 느낌표나 물음표가 있는지 확인할 수 있습니다. 이는 오디오 드라이버를 업데이트하거나 다시 설치해야 함을 나타낼 수 있습니다.
위 단계로 문제가 해결되지 않으면 휴대폰이나 MP3 플레이어 등 다른 오디오 소스를 통해 스피커에 연결하여 테스트해 볼 수 있습니다. 이를 통해 컴퓨터 오디오 문제인지 오디오 장비 문제인지 확인할 수 있습니다.
마지막으로 위의 방법으로도 문제가 해결되지 않으면 오디오 장비의 애프터 서비스 센터에 연락하여 도움을 받는 것이 좋습니다. 스피커에서 소리가 나지 않는 문제를 해결하는 데 도움이 되는 솔루션을 제공합니다.
이 기사를 읽어 주셔서 감사합니다. 위의 방법이 컴퓨터 스피커에서 소리가 나지 않는 문제를 해결하는 데 도움이 되기를 바랍니다.
다음과 같은 상황이 발생할 수 있습니다. 검안사가 오작동할 수 있습니다. 국내 검안사는 상태가 매우 좋지 않아 문제가 발생하는 경우가 많습니다. 각막 얼룩, 수정체 탁도, 유리체 탁도 등과 같은 굴절 매체에 문제가 있을 수도 있습니다. 앞으로는 검안을 위해 병원에 가는 것이 좋습니다. 이 경우 검안사가 아닌 사람은 기본적으로 이 기술을 익힐 수 없습니다. 또한, 병원 검안은 비용이 많이 들지 않으며, 검안 후 일반 안경점에 가서 안경을 구입할 수 있습니다. 병원에서 검사를 할 수 없다면 안과의사를 만나야 합니다.
1. 냉각 없음
냉장고의 전원 플러그가 꽂혀 있는지, 전원 소켓에 전원이 연결되어 있는지, 전원 차단기가 분리되어 있는지. 냉장고에 전원이 연결되어 있는지 확인하려면 냉장고 문 조명이 켜져 있는지 확인하세요. 온도 조절 장치가 작동 기어에 있는지 확인하십시오. 온도 조절 장치에 정지 기어(0 기어)가 있으면 압축기가 작동하지 않습니다. 위 항목이 정상인 경우, 유지보수 담당자에게 연락하여 문제를 해결하십시오.
2. 문 몸체가 똑바르지 않습니다
이 경우 문 경첩을 조정하여 문을 곧게 펴주시면 됩니다. 냉장고 하부 경첩 나사를 풀고 도어 위치를 조정한 후 나사를 조여주세요. 냉장고 경첩 중간 나사를 풀고 문을 좌우로 움직여 조절한 후 나사를 조여주세요.
3. 불이 들어오지 않아요
전구가 깨졌으면 그냥 교체하세요. 또한, 도어 전등 스위치는 튀어나오지 않고 켜지지 않는 기계적 결함이 있어 손으로 가볍게 당기면 복원이 가능합니다. 도어 전등 스위치의 버튼 가장자리를 막고 있는 버로 인해 발생하는 결함은 작은 칼날로 가장자리 버를 긁어내면 제거될 수 있습니다. 냉장고의 도어 조명 스위치는 플라스틱 덮개를 제거해야 하는 작은 누르는 부분으로 작동됩니다. 누름 부분과 도어 조명 스위치를 꺼낸 후 먼저 누름 부분을 제자리에 끼운 다음 플라스틱 덮개를 설치하면 결함이 제거됩니다.
일반적인 오류는 다음과 같습니다.
1. 컴퓨터 보드가 시작되지 않거나 부팅 시 검은색 화면이 나타납니다. 이는 일반적으로 메모리 모듈 불량, 하드 드라이브 오류, 마더보드 손상 등으로 인해 발생합니다. 메모리 모듈을 다시 삽입 및 분리하거나 하드 드라이브를 교체하거나 마더보드에 문제가 있는지 확인할 수 있습니다.
2. 죽음의 블루스크린. 블루스크린 오브 데스(Blue Screen of Death)는 소프트웨어 문제, 하드웨어 손상, 드라이버 비호환성 등으로 인해 발생할 수 있습니다. 시스템 수리, 드라이버 업데이트 또는 하드웨어 교체를 통해 문제 해결을 시도할 수 있습니다.
3. 컴퓨터가 느리게 실행됩니다. 컴퓨터 바이러스, 메모리 부족, 애플리케이션 충돌 등으로 인해 발생할 수 있습니다. 문제를 해결하기 위해 바이러스 백신 소프트웨어를 사용하여 바이러스를 치료하고, 메모리를 늘리고, 중요하지 않은 응용 프로그램을 닫을 수 있습니다.
4. The computer board makes abnormal noises. It may be caused by power failure, fan failure, etc. You can try replacing the power supply or fan to solve the problem.
5. The USB interface cannot be recognized. It may be caused by USB driver issues or unstable power output voltage. You can try updating the USB driver, replacing the power supply, etc. to solve the problem.
These are common faults of Fox computer boards. If you encounter these problems, you can troubleshoot and solve them according to the above methods. If it cannot be repaired by yourself, it is recommended to contact professional maintenance personnel.
Computer power failure generally has the following phenomena:
Fault 1. There is power output but no display when turned on
Fault phenomenon: There is power output in the computer, but no display when turned on.
Analysis and solution: The possible reason for this failure is that the delay time of the RESET signal input by POWERGOOD is not enough, or POWERGOOD has no output. After starting up, use a voltmeter to measure the output terminal of POWERGOOD. If there is no +5V output, check the delay element again. If the device has +5V, just replace the delay capacitor of the delay circuit.
Fault 2. It will automatically restart every time it is turned on
Fault phenomenon: The computer will automatically restart once every time it is turned on, but now it needs to repeat the self-test before entering the operating system.
Analysis and solution: Rebooting at startup is usually caused by a motherboard failure. Unstable power output may also cause this. Check these two devices.
Fault 3. There is a ignition in the case and the indicator light of the monitor power supply flashes at the same time.
Fault phenomenon: There is a ignition in the case and the indicator light of the monitor power supply flashes.
Analysis and solution: It is very likely that it is a problem with the power supply, because it is difficult for other accessories in the chassis to cause this problem. This means that the components inside the power supply are damaged or short-circuited, so go to a professional for repair or repair. Replace the power supply with a new one.
Fault 4. The computer will automatically shut down after just a few minutes of booting.
Fault phenomenon: The computer is configured with PENTUM3 700, MSI motherboard, modern 128MB, and MAZTOR hard drive. Recently, the computer will automatically shut down after just a few minutes of booting. The indicator lights on the host, optical drive and monitor are all on and the fan is running, but there is no response. Only by turning off the power and restarting can it work normally.
Analysis and solution: After the power supply has been working for a period of time, the heat will become larger, and some components will work unstable, causing the output current to be cut off, so the power supply needs to be repaired.
Fault 5. The host power is automatically turned on when the power switch is turned on
Fault phenomenon: The computer boot sequence is reversed. Normally, the monitor and host should be started manually one by one, but the host power is automatically turned on when the power switch is turned on. .
Analysis and solution: It is very likely that the problem is caused by the settings in the BIOS. In this way, first enter the BIOS of the motherboard to set up, and listen to a function of the PWERON AFRER POWERFALL option in POSERMANAGERMENT to turn off the problem.
Fault 6. You need to remove the power plug and plug it in before restarting
Fault phenomenon: In offline state, when checking QQ messages and letters in FOXMAIL, the computer will suddenly shut down. At this time, the computer will shut down suddenly. There is no response from the power switch. And be sure to remove the power plug and plug it in again before restarting.
Analysis and solution: It is likely that there is a problem with the automatic protection circuit of the power supply. Check whether the mains power is stable. In addition, you can use another power supply first to see if it is caused by the power supply itself.
Fault 7. Restarting during the shutdown process
Fault phenomenon: Recently, every time the shutdown is in progress, after the screen shows that it is shutting down, it will automatically restart. In addition, sometimes it will automatically restart after entering WINDOWS98 after booting.
Analysis and solution: This is due to a bug in the energy control function of WINDOWS98. If so, you need to install the relevant shutdown patch of WINDOWS98 to solve this problem. If you restart just after entering WINDOWS98, the motherboard is faulty or It is caused by improper current output of the power supply. You can turn off the advanced management of the power supply in the WINDOWS system control panel.
When there is no sound on the computer, first check whether the hardware is normal. You can first make sure the speakers or headphones are connected and turned on, and adjust the volume to an appropriate level. If you are using headphones, you can also try changing to other headphones to confirm whether the problem is with the headphones themselves.
If there is no problem with the hardware, then check the volume settings of the computer. Click the volume icon on the taskbar and make sure the volume is not muted. At the same time, you can check the volume control options in the settings to ensure that all settings are correct.
Sometimes the computer has no sound because there is a problem with the audio driver. You can find the audio device through the device manager, right-click and select Update Driver to let the system automatically search and update the latest audio driver.
In Windows-Systemen müssen einige Audiodienste aktiviert sein, da sonst die normale Tonwiedergabe beeinträchtigt wird. Sie können den Windows-Audiodienst unter „Dienste“ finden und überprüfen, ob er den Status „Wird ausgeführt“ hat. Wenn nicht, können Sie mit der rechten Maustaste klicken und „Start“ auswählen.
Manchmal gibt der Computer keinen Ton aus, weil er mit Viren oder Malware infiziert ist. Führen Sie mit einer Antivirensoftware einen umfassenden Scan Ihres Computers durch, um mögliche Virenbedrohungen zu entfernen.
Wenn die oben genannten Methoden das Problem nicht lösen können, liegt möglicherweise ein schwerwiegender Fehler im System vor. Sie können erwägen, wichtige Daten zu sichern und dann versuchen, das Betriebssystem neu zu installieren, um das Problem zu lösen.
Vielen Dank, dass Sie diesen Artikel gelesen haben. Ich hoffe, diese Methoden können Ihnen helfen, das Problem zu lösen, dass auf Ihrem Computer kein Ton zu hören ist.
Wenn Sie feststellen, dass auf Ihrem Computer kein Ton zu hören ist, überprüfen Sie zunächst die Lautstärkeeinstellungen. Klicken Sie auf das Lautstärkesymbol in der unteren rechten Ecke der Taskleiste, um sicherzustellen, dass der Lautstärkeregler nicht stummgeschaltet ist und die Lautstärke richtig eingestellt ist.
Wenn Sie externe Lautsprecher oder Kopfhörer verwenden, stellen Sie sicher, dass das Gerät normal ist. Sie können versuchen, eine Verbindung zu anderen Geräten herzustellen oder andere Kopfhörer zu verwenden, um Fehler am Gerät selbst zu beheben.
Veraltete oder beschädigte Audiotreiber können dazu führen, dass auf Ihrem Computer kein Ton zu hören ist. Öffnen Sie den Geräte-Manager, suchen Sie das Audio-Ein- und Ausgabegerät und klicken Sie mit der rechten Maustaste, um den Treiber zu aktualisieren.
Überprüfen Sie, ob die Audioleitung richtig angeschlossen ist, und beseitigen Sie das Problem, dass kein Ton durch einen Leitungsfehler verursacht wird. Stellen Sie außerdem sicher, dass sich im Audio-Interface kein Staub oder Schmutz befindet, der die Verbindung beeinträchtigt.
Manchmal schlägt der Audiodienst fehl, was zu keinem Ton führt. Sie können den Dienstmanager öffnen, indem Sie „services.msc“ in das Ausführungsfenster eingeben, den Windows-Audiodienst suchen und ihn neu starten.
Wenn keine der oben genannten Methoden das Problem löst, ist möglicherweise die Audio-Hardware fehlerhaft. Sie können erwägen, sich für die Wartung oder den Austausch fehlerhafter Teile an einen Fachmann zu wenden.
Vielen Dank für das Lesen dieses Artikels. Ich hoffe, diese Methoden können Ihnen helfen, das Problem zu lösen, dass auf Ihrem Computer kein Ton zu hören ist.
Das obige ist der detaillierte Inhalt vonFehlerbehebung bei fehlendem Ton auf dem Computer: Häufige Probleme lösen, wenn auf dem Computer kein Ton zu hören ist. Für weitere Informationen folgen Sie bitte anderen verwandten Artikeln auf der PHP chinesischen Website!
![[Web-Frontend] Node.js-Schnellstart](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
