©
Dieses Dokument verwendet PHP-Handbuch für chinesische Websites Freigeben
(PHP 4 >= 4.0.1, PHP 5, PHP 7)
imagewbmp — 以 WBMP 格式将图像输出到浏览器或文件
$image
[, string $filename
[, int $foreground
]] ) imagewbmp() 从
image
图像创建一个名为 filename
的
WBMP 文件。image
参数是 imagecreatetruecolor() 的返回值。
filename
参数是可选项,如果省略,则直接将原图像流输出。通过用
header() 发送 image/vnd.wap.wbmp
的 Content-type,可以创建直接输出 WBMP 图像的 PHP 脚本。
Note:
WBMP 支持仅能用于 PHP 编译时加入了 GD-1.8 或更高版本时。
用可选的 foreground
参数可以设定前景色,用
imagecolorallocate() 函数返回的颜色标识符。默认前景色是黑色。
参见 image2wbmp() , imagepng() , imagegif() , imagejpeg() 和 imagetypes() 。
[#1] andre at bynetworld dot com [2007-12-19 05:31:43]
In the previous note by -> lukeross at sys3175 dot co dot uk <- there is a coding error in the for() loops. After correcting the error, I found that this function did a great job of converting color images to 2 colors.
The following is the corrected function code:
function ImageColorFloydSteinberg($dst_img, $src_img) {
ImageColorAllocate($dst_img, 0,0,0);
ImageColorAllocate($dst_img, 255,255,255);
$isx = ImageSX($src_img);
$isy = ImageSY($src_img);
$grey_img = ImageCreate($isx, $isy);
for ($a = 0; $a <= 255; $a++) ImageColorAllocate($grey_img, $a,$a,$a);
$isx -= 1; // To correct pixel count in source image width starting from 0
$isy -= 1; // Correcting pixel count in source image height starting from 0
for($x = 0; $x <= $isx; $x++) {
for($y = 0; $y <= $isy; $y++) {
$color = ImageColorsForIndex($src_img, ImageColorAt($src_img, $x, $y));
$greyscale = .299 * $color["red"] + .587 * $color["green"] + .114 * $color["blue"];
ImageSetPixel($grey_img, $x, $y, ImageColorClosest($grey_img, $greyscale, $greyscale, $greyscale));
}
}
for($x = 0; $x <= $isx; $x++) {
for($y = 0; $y <= $isy; $y++) {
$color = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x, $y));
if ($color["red"] > 128) {
ImageSetPixel($dst_img, $x, $y, ImageColorClosest($dst_img,255,255,255));
$err = $color["red"] - 255;
} else {
ImageSetPixel($dst_img, $x, $y, ImageColorClosest($dst_img,0,0,0));
$err = $color["red"];
}
if ($x != $isx) {
$color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x+1, $y));
$newgrey = $color2["red"] + $err * 7 / 16;
ImageSetPixel($grey_img, $x+1, $y, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
}
if ($x != 0) {
$color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x-1, $y));
$newgrey = $color2["red"] + $err * 3 / 16;
ImageSetPixel($grey_img, $x-1, $y, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
}
if ($y != $isy) {
$color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x, $y+1));
$newgrey = $color2["red"] + $err * 5 / 16;
ImageSetPixel($grey_img, $x, $y+1, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
}
if ($x != $isx && $y != $isy) {
$color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x+1, $y+1));
$newgrey = $color2["red"] + $err / 16;
ImageSetPixel($grey_img, $x+1, $y+1, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
}
}
}
imagedestroy($grey_img);
}
[#2] lukeross at sys3175 dot co dot uk [2002-02-28 13:57:59]
As has been commented before, GD doesnt do a very good translation to 2-colours, especially for photos. The following routine converts to two colours, I believe using error diffusion (the algorithm's nicked off news). It's slow, but just about adequate for small images and low load. I suspect it can be made much more efficient :-)
function ImageColorFloydSteinberg($dst_img, $src_img) {
ImageColorAllocate($dst_img, 0,0,0);
ImageColorAllocate($dst_img, 255,255,255);
$grey_img = ImageCreate(ImageSX($src_img), ImageSY($src_img));
for ($a = 0; $a <= 255; $a++) ImageColorAllocate($grey_img, $a,$a,$a);
for($x = 0; $x <= ImageSX($src_img); $x++) {
for($y = 0; $y <= ImageSY($src_img); $y++) {
$color = ImageColorsForIndex($src_img, ImageColorAt($src_img, $x, $y));
$greyscale = .299 * $color["red"] + .587 * $color["green"] + .114 * $color["blue"];
ImageSetPixel($grey_img, $x, $y, ImageColorClosest($grey_img, $greyscale, $greyscale, $greyscale));
}
}
for($x = 0; $x <= ImageSX($src_img); $x++) {
for($y = 0; $y <= ImageSY($src_img); $y++) {
$color = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x, $y));
if ($color["red"] > 128) {
ImageSetPixel($dst_img, $x, $y, ImageColorClosest($dst_img,255,255,255));
$err = $color["red"] - 255;
} else {
ImageSetPixel($dst_img, $x, $y, ImageColorClosest($dst_img,0,0,0));
$err = $color["red"];
}
if ($x != ImageSx($src_img)) {
$color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x+1, $y));
$newgrey = $color2["red"] + $err * 7 / 16;
ImageSetPixel($grey_img, $x+1, $y, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
}
if ($x != 0) {
$color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x-1, $y));
$newgrey = $color2["red"] + $err * 3 / 16;
ImageSetPixel($grey_img, $x-1, $y, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
}
if ($y != ImageSy($src_img)) {
$color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x, $y+1));
$newgrey = $color2["red"] + $err * 5 / 16;
ImageSetPixel($grey_img, $x, $y+1, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
}
if ($x != ImageSx($src_img) && $y != ImageSy($src_img)) {
$color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x+1, $y+1));
$newgrey = $color2["red"] + $err / 16;
ImageSetPixel($grey_img, $x+1, $y+1, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
}
}
}
imagedestroy($grey_img);
}
To output your WBMP, use
ImageWBMP($final_img, "", ImageColorClosest(255,255,255));