©
Dieses Dokument verwendet PHP-Handbuch für chinesische Websites Freigeben
(PECL imagick 2.0.0)
Imagick::resizeImage — Scales an image
$columns
, int $rows
, int $filter
, float $blur
[, bool $bestfit
= false
] )Scales an image to the desired dimensions with a filter.
Note: 参数
bestfit
的特性在 Imagick 3.0.0 中已改变。在此版本以前,当目标尺寸设为 400x400 时,原尺寸为 200x150 的图像将不会被改变。自 Imagick 3.0.0 起,源图像将会被放大到 400x300 因为这将更好的适合目标尺寸。当使用参数bestfit
时,必须同时给出宽度和高度。
columns
Width of the image
rows
Height of the image
filter
Refer to the list of filter constants.
blur
The blur factor where > 1 is blurry, < 1 is sharp.
bestfit
Optional fit parameter.
成功时返回 TRUE
。
版本 | 说明 |
---|---|
2.1.0 | Added optional fit parameter. This method now supports proportional scaling. Pass zero as either parameter for proportional scaling. |
Example #1 Imagick::resizeImage()
<?php
function resizeImage ( $imagePath , $width , $height , $filterType , $blur , $bestFit , $cropZoom ) {
//The blur factor where > 1 is blurry, < 1 is sharp.
$imagick = new \ Imagick ( realpath ( $imagePath ));
$imagick -> resizeImage ( $width , $height , $filterType , $blur , $bestFit );
$cropWidth = $imagick -> getImageWidth ();
$cropHeight = $imagick -> getImageHeight ();
if ( $cropZoom ) {
$newWidth = $cropWidth / 2 ;
$newHeight = $cropHeight / 2 ;
$imagick -> cropimage (
$newWidth ,
$newHeight ,
( $cropWidth - $newWidth ) / 2 ,
( $cropHeight - $newHeight ) / 2
);
$imagick -> scaleimage (
$imagick -> getImageWidth () * 4 ,
$imagick -> getImageHeight () * 4
);
}
header ( "Content-Type: image/jpg" );
echo $imagick -> getImageBlob ();
}
?>
[#1] Spitfires [2012-03-04 09:39:33]
To avoid upscaling when using the "bestfit" param, check the image dimensions before resizing:
<?php
$image = new Imagick( $filename );
$imageprops = $image->getImageGeometry();
if ($imageprops['width'] <= 200 && $imageprops['height'] <= 200) {
// don't upscale
} else {
$image->resizeImage(200,200, imagick::FILTER_LANCZOS, 0.9, true);
}
?>
[#2] Spitfires [2012-03-04 09:27:40]
The changelog comment
"2.1.0 Added optional fit parameter. This method now supports proportional scaling. Pass zero as either parameter for proportional scaling."
is poorly structured and therefore IMO misleading. Yes for proportional scaling you pass 0 as either parameter... however this is *not* true if you use the optional fit param. When bestfit == true you must specify a *non-zero* value for both columns and rows. Note it WILL still scale proportionally e.g.
Imagick::resizeImage ( 200, 200, imagick::FILTER_LANCZOS, 1, TRUE)
will resize a 1000x750 image to 200x150
So for proportional resizing:
without "bestfit"
Imagick::resizeImage ( 200, 0, imagick::FILTER_LANCZOS, 1)
with "bestfit"
Imagick::resizeImage ( 200, 200, imagick::FILTER_LANCZOS, 1, TRUE)
[#3] jdhawk at gmail dot com [2011-04-15 10:37:46]
In our linux environment, using resizeImage with any filter produced extremely high CPU Utilization (in the range of 40-50%) while doing batch resizing.
We switched to scaleImage, which produces similar results to FILTER_BOX, and CPU Utilization dropped to 2-3%.
Using XHProf to profile the two batch jobs showed amazing decreases in CPU Time, so if you're doing a lot of picture resizing, it might be beneficial to use scaleImage instead of resizeImage, as it seems to be much much more efficient.
[#4] michael dot heca at gmail dot com [2009-11-16 05:18:17]
Use setImageOpacity(1.0) before resizing, for proper handling of transparency in png and gif.
[#5] dennis at gofolo dot com [2009-11-08 06:32:09]
Having to do alot of resizing, i needed to know the speeds of the different resize filters.
This was how long it took to resize a 5906x5906 JPEG image to 1181x1181.
FILTER_POINT took: 0.334532976151 seconds
FILTER_BOX took: 0.777871131897 seconds
FILTER_TRIANGLE took: 1.3695909977 seconds
FILTER_HERMITE took: 1.35866093636 seconds
FILTER_HANNING took: 4.88722896576 seconds
FILTER_HAMMING took: 4.88665103912 seconds
FILTER_BLACKMAN took: 4.89026689529 seconds
FILTER_GAUSSIAN took: 1.93553304672 seconds
FILTER_QUADRATIC took: 1.93322920799 seconds
FILTER_CUBIC took: 2.58396601677 seconds
FILTER_CATROM took: 2.58508896828 seconds
FILTER_MITCHELL took: 2.58368492126 seconds
FILTER_LANCZOS took: 3.74232912064 seconds
FILTER_BESSEL took: 4.03305602074 seconds
FILTER_SINC took: 4.90098690987 seconds
I ended up choosing CATROM as it has a very similar result to LANCZOS, but is significantly faster.
[#6] andrabr at gmail dot com [2007-08-24 16:08:35]
blur: > 1 is blurry, < 1 is sharp
To create a nice thumbnail (LANCZOS is the slowest filter):
<?php
$thumb = new Imagick();
$thumb->readImage('myimage.gif'); $thumb->resizeImage(320,240,Imagick::FILTER_LANCZOS,1);
$thumb->writeImage('mythumb.gif');
$thumb->clear();
$thumb->destroy();
?>
Or, a shorter version of the same:
<?php
$thumb = new Imagick('myimage.gif');
$thumb->resizeImage(320,240,Imagick::FILTER_LANCZOS,1);
$thumb->writeImage('mythumb.gif');
$thumb->destroy();
?>