Home Database Mysql Tutorial 思科6000系列交换机配置维护手册(2)

思科6000系列交换机配置维护手册(2)

Jun 07, 2016 pm 03:00 PM
switch Cisco manual series maintain Enter Configuration

欢迎进入网络技术社区论坛,与200万技术人员互动交流 >>进入 5. 配置二层端口 5.1. 配置Trunk: Router(config)# interface fastethernet x/y (以fastethernet为例,gigabitethernet一样) Router(config-if)# shutdown Router(config-if)# switchport Route

欢迎进入网络技术社区论坛,与200万技术人员互动交流 >>进入

    5. 配置二层端口

    5.1. 配置Trunk:

    Router(config)# interface fastethernet x/y (以fastethernet为例,gigabitethernet一样)

    Router(config-if)# shutdown

    Router(config-if)# switchport

    Router(config-if)# switchport mode dynamic desirable

    Router(config-if)# switchport trunk encapsulation dot1q

    Router(config-if)# no shutdown

    Router(config-if)# end

    Router# exit

    如果要配置二台6509之间的Trunk联接,首先将二6509用千兆光纤相联好,然后分别配置二相联端口的trunk,可以是只用一双光纤,或用二对光纤做port channel,配置如下:

    一双光纤相联时,分别在二台65上进行以下的配置:

    interface GigabitEthernet1/1

    no ip address

    switchport

    switchport trunk encapsulation dot1q

    switchport trunk native vlan 1

    二对光纤做port channel,分别在二台65上进行以下的配置::

    interface port-channe1

    no ip address

    switchport

    switchport trunk encapsulation dot1q

    switchport trunk native vlan 1

    !

    interface GigabitEthernet1/1

    no ip address

    switchport

    switchport trunk encapsulation dot1q

    switchport trunk native vlan 1

    channel-group 1 mode on

    !

    interface GigabitEthernet1/2

    no ip address

    switchport

    switchport trunk encapsulation dot1q

    switchport trunk native vlan 1

    channel-group 1 mode on

    6. 配置HSRP

    在其中一台65上按下面模版进行配置

    interface Vlan x

    ip address x.x.x.x x.x.x.x

    no ip redirects

    no ip directed-broadcast

    standby 1 priority 100 preempt

    standby 1 ip y.y.y.y

    !

[1] [2] [3] [4] 

思科6000系列交换机配置维护手册(2)

Statement of this Website
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn

Hot AI Tools

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Undress AI Tool

Undress AI Tool

Undress images for free

Clothoff.io

Clothoff.io

AI clothes remover

AI Hentai Generator

AI Hentai Generator

Generate AI Hentai for free.

Hot Article

R.E.P.O. Energy Crystals Explained and What They Do (Yellow Crystal)
2 weeks ago By 尊渡假赌尊渡假赌尊渡假赌
Repo: How To Revive Teammates
4 weeks ago By 尊渡假赌尊渡假赌尊渡假赌
Hello Kitty Island Adventure: How To Get Giant Seeds
3 weeks ago By 尊渡假赌尊渡假赌尊渡假赌

Hot Tools

Notepad++7.3.1

Notepad++7.3.1

Easy-to-use and free code editor

SublimeText3 Chinese version

SublimeText3 Chinese version

Chinese version, very easy to use

Zend Studio 13.0.1

Zend Studio 13.0.1

Powerful PHP integrated development environment

Dreamweaver CS6

Dreamweaver CS6

Visual web development tools

SublimeText3 Mac version

SublimeText3 Mac version

God-level code editing software (SublimeText3)

The working principle and configuration method of GDM in Linux system The working principle and configuration method of GDM in Linux system Mar 01, 2024 pm 06:36 PM

Title: The working principle and configuration method of GDM in Linux systems In Linux operating systems, GDM (GNOMEDisplayManager) is a common display manager used to control graphical user interface (GUI) login and user session management. This article will introduce the working principle and configuration method of GDM, as well as provide specific code examples. 1. Working principle of GDM GDM is the display manager in the GNOME desktop environment. It is responsible for starting the X server and providing the login interface. The user enters

Understand Linux Bashrc: functions, configuration and usage Understand Linux Bashrc: functions, configuration and usage Mar 20, 2024 pm 03:30 PM

Understanding Linux Bashrc: Function, Configuration and Usage In Linux systems, Bashrc (BourneAgainShellruncommands) is a very important configuration file, which contains various commands and settings that are automatically run when the system starts. The Bashrc file is usually located in the user's home directory and is a hidden file. Its function is to customize the Bashshell environment for the user. 1. Bashrc function setting environment

Xiaomi 15 series full codenames revealed: Dada, Haotian, Xuanyuan Xiaomi 15 series full codenames revealed: Dada, Haotian, Xuanyuan Aug 22, 2024 pm 06:47 PM

The Xiaomi Mi 15 series is expected to be officially released in October, and its full series codenames have been exposed in the foreign media MiCode code base. Among them, the flagship Xiaomi Mi 15 Ultra is codenamed "Xuanyuan" (meaning "Xuanyuan"). This name comes from the Yellow Emperor in Chinese mythology, which symbolizes nobility. Xiaomi 15 is codenamed "Dada", while Xiaomi 15Pro is named "Haotian" (meaning "Haotian"). The internal code name of Xiaomi Mi 15S Pro is "dijun", which alludes to Emperor Jun, the creator god of "The Classic of Mountains and Seas". Xiaomi 15Ultra series covers

MyBatis Generator configuration parameter interpretation and best practices MyBatis Generator configuration parameter interpretation and best practices Feb 23, 2024 am 09:51 AM

MyBatisGenerator is a code generation tool officially provided by MyBatis, which can help developers quickly generate JavaBeans, Mapper interfaces and XML mapping files that conform to the database table structure. In the process of using MyBatisGenerator for code generation, the setting of configuration parameters is crucial. This article will start from the perspective of configuration parameters and deeply explore the functions of MyBatisGenerator.

How to configure workgroup in win11 system How to configure workgroup in win11 system Feb 22, 2024 pm 09:50 PM

How to configure a workgroup in Win11 A workgroup is a way to connect multiple computers in a local area network, which allows files, printers, and other resources to be shared between computers. In Win11 system, configuring a workgroup is very simple, just follow the steps below. Step 1: Open the "Settings" application. First, click the "Start" button of the Win11 system, and then select the "Settings" application in the pop-up menu. You can also use the shortcut "Win+I" to open "Settings". Step 2: Select "System" In the Settings app, you will see multiple options. Please click the "System" option to enter the system settings page. Step 3: Select "About" In the "System" settings page, you will see multiple sub-options. Please click

The best time to buy Huawei Mate 60 series, new AI elimination + image upgrade, and enjoy autumn promotions The best time to buy Huawei Mate 60 series, new AI elimination + image upgrade, and enjoy autumn promotions Aug 29, 2024 pm 03:33 PM

Since the Huawei Mate60 series went on sale last year, I personally have been using the Mate60Pro as my main phone. In nearly a year, Huawei Mate60Pro has undergone multiple OTA upgrades, and the overall experience has been significantly improved, giving people a feeling of being constantly new. For example, recently, the Huawei Mate60 series has once again received a major upgrade in imaging capabilities. The first is the new AI elimination function, which can intelligently eliminate passers-by and debris and automatically fill in the blank areas; secondly, the color accuracy and telephoto clarity of the main camera have been significantly upgraded. Considering that it is the back-to-school season, Huawei Mate60 series has also launched an autumn promotion: you can enjoy a discount of up to 800 yuan when purchasing the phone, and the starting price is as low as 4,999 yuan. Commonly used and often new products with great value

How to configure and install FTPS in Linux system How to configure and install FTPS in Linux system Mar 20, 2024 pm 02:03 PM

Title: How to configure and install FTPS in Linux system, specific code examples are required. In Linux system, FTPS is a secure file transfer protocol. Compared with FTP, FTPS encrypts the transmitted data through TLS/SSL protocol, which improves Security of data transmission. In this article, we will introduce how to configure and install FTPS in a Linux system and provide specific code examples. Step 1: Install vsftpd Open the terminal and enter the following command to install vsftpd: sudo

Guide you to set up a Maven local repository to speed up project construction Guide you to set up a Maven local repository to speed up project construction Feb 24, 2024 pm 02:12 PM

Teach you step by step how to configure Maven local warehouse: improve project construction speed Maven is a powerful project management tool that is widely used in Java development. It can help us manage project dependencies, build projects, and publish projects, etc. However, during the actual development process, we sometimes encounter the problem of slow project construction. One solution is to configure a local repository to improve project build speed. This article will teach you step by step how to configure the Maven local warehouse to make your project construction more efficient. Why do you need to configure a local warehouse?

See all articles