Linux平台Oracle安装脚本
Jun 07, 2016 pm 05:41 PM#脚本仅供交流学习使用!#脚本当前版本为1.0.实现了物理内存交换空间的检测,RPM包的自动安装(需配置Yum或者挂载光盘,如果你复制了所有需要的RPM包到某个目录,也O
# 脚本仅供交流学习使用!
# 脚本当前版本为1.0.实现了物理内存&交换空间的检测,RPM包的自动安装(需配置Yum或者挂载光盘,如果你复制了所有需要的RPM包到某个目录,也OK.),用户&用户组的创建,软件环境变量的配置,系统内核参数配置等功能.脚本执行成功后,即可将Oracle安装包解压然后runInstaller开启图形化安装了.
# 脚本已在Red Hat Enterprise Linux 5.4 64bit上测试通过(Oracle 10g/Oracle11g).原则上适用于RHEL 5和RHEL 6.
# 欢迎提出改进意见.
# 脚本可通过附件下载
#!/bin/bash
# Version 1.0
# AUTHOR: Xin23
#1.Oracle Version and System
GetOracleVersion() {
read -p "Which Version of Oracle You Will Install? [11|10]?
" VERSION
}
GetOracleVersion
SetVersion() {
if
[ $VERSION -eq 11 ]
then echo 'Oracle Version is 11!
'
elif [ $VERSION -eq 10 ]
then echo 'Oracle Version is 10!
'
else
echo 'Please Retype The Version of Oracle You Will Install!
'
GetOracleVersion
SetVersion
fi
}
SetVersion
MEMORY=$(cat /proc/meminfo | grep MemTotal | awk '{print $2}')
SWAP=$(cat /proc/meminfo | grep SwapTotal | awk '{print $2}')
MEMORY_REQ=1048576
if [ $MEMORY -lt $MEMORY_REQ ]
then echo 'Physical Memory is too small! '
exit 1
else
echo 'Physical Memory Check OK! '
fi
if [ $VERSION -eq 10 ]
then
if [ $MEMORY -lt 2097152 ]
then if [ $SWAP -lt $(echo "$MEMORY*3/2"|bc) ]
then echo 'Swap is too small! '
exit 2
else
echo 'Swap Check OK! '
fi
elif [ $MEMORY -gt 2097152 ] || [ $MEMORY -lt 8388608 ]
then if [ $SWAP -lt $MEMORY ]
then echo 'Swap is too small! '
exit 2
else
echo 'Swap Check OK! '
fi
elif [ $MEMORY -gt 8388608 ]
then if [ $SWAP -lt $(echo "$MEMORY*3/4"|bc) ]
then echo 'Swap is too small! '
exit 2
else
echo 'Swap Check OK! '
fi
fi
elif [ $VERSION -eq 11 ]
then
if
[ $MEMORY -lt 2097152 ]
then if [ $SWAP -lt $(echo "$MEMORY*3/2"|bc) ]
then echo 'Swap is too small! '
exit 2
else
echo 'Swap Check OK! '
fi
elif [ $MEMORY -gt 2097152 ] || [ $MEMORY -lt 16777216 ]
then if [ $SWAP -lt $MEMORY ]
then echo 'Swap is too small! '
exit 2
else
echo 'Swap Check OK! '
fi
elif [ $MEMORY -gt 16777216 ]
then if [ $SWAP -lt 16777216 ]
then echo 'Swap is too small! '
exit 2
else
echo 'Swap Check OK! '
fi
fi
fi
echo 'Oracle Version and System hardware has been checked! '
#2.Software
Rpm() {
rpm -ivh compat-libstdc++*
rpm -ivh compat-libstdc++*
rpm -ivh elfutils-libelf*i386.rpm
rpm -ivh elfutils-libelf*x86_64.rpm
rpm -ivh elfutils-libelf-devel-static*x86_64.rpm elfutils-libelf-devel*x86_64.rpm
rpm -ivh elfutils-libelf-devel-static*i386.rpm elfutils-libelf-devel*i386.rpm
rpm -ivh libaio-devel*
rpm -ivh sysstat*
rpm -ivh unixODBC-[[:digit:]]*
rpm -ivh unixODBC-devel*
rpm -ivh kernel-headers*
rpm -ivh glibc-headers*
rpm -ivh glibc-devel*
rpm -ivh libgomp*
rpm -ivh libstdc++-devel*x86_64.rpm
rpm -ivh libstdc++-devel*i386.rpm
rpm -ivh gcc-[[:digit:]]*
rpm -ivh gcc-c++*
rpm -ivh libXp-[[:digit:]]*
}
Yum() {
yum -y install compat-libstdc++
yum -y install elfutils-libelf-devel-static
yum -y install elfutils-libelf-devel
yum -y install libaio-devel
yum -y install sysstat
yum -y install unixODBC
yum -y install unixODBC-devel
yum -y install kernel-headers
yum -y install glibc-headers
yum -y install glibc-devel
yum -y install libgomp
yum -y install gcc
yum -y install gcc-c++
yum -y install libstdc++-devel
yum -y install libXp
}
GetYum() {
read -p "Have you config the yum? [y|n] " YUM
}
GetYum
RetroYum() {
if [ $YUM = y ]
then Yum
elif [ $YUM = n ]
then read -p "Please input rpm package's location: " MEDIA_DIR
cd $MEDIA_DIR
Rpm
else
GetYum
RetroYum
fi
}
RetroYum
echo 'Necessary RPM Package has been installed! '
#3.User and Groups
groupadd oinstall
groupadd dba
useradd -g oinstall -G dba oracle
mkdir -p /u01/app/oracle;chown -R oracle:oinstall /u01
read -p "Please input password for user oracle: " PASSWORD
echo "$PASSWORD" | passwd --stdin oracle
echo 'User and Group has been Created! '
#4.Environment
read -p "Please input ORACLE SID: " SID
su -c "echo 'export ORACLE_BASE=/u01/app/oracle' >> ~/.bash_profile" oracle
su -c "echo 'export ORACLE_SID=$SID' >> ~/.bash_profile" oracle
export ORACLE_BASE=/u01/app/oracle
if [ $VERSION = 11 ]
then su -c 'echo "export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/dbhome_1" >> ~/.bash_profile' oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/dbhome_1
elif [ $VERSION = 10 ]
then su -c 'echo "export ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1" >> ~/.bash_profile' oracle
export ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1
else
exit 3
fi
su -c 'echo "export PATH=$PATH:$HOME/bin:$ORACLE_HOME/bin" >> ~/.bash_profile' oracle
echo 'Software Enviroment has been finished! '
#5.Operate System and Kernel Parameters
read -p "Please input your ip address: " IP_ADDRESS
echo "$IP_ADDRESS $(hostname)" >> /etc/hosts
echo 'fs.aio-max-nr = 1048576' >> /etc/sysctl.conf
echo 'fs.file-max = 6815744' >> /etc/sysctl.conf
echo 'kernel.shmmni = 4096' >> /etc/sysctl.conf
echo 'kernel.sem = 250 32000 100 128' >> /etc/sysctl.conf
echo 'net.core.rmem_default = 262144' >> /etc/sysctl.conf
echo 'net.core.rmem_max = 4194304' >> /etc/sysctl.conf
echo 'net.core.wmem_default = 262144' >> /etc/sysctl.conf
echo 'net.core.wmem_max = 1048586' >> /etc/sysctl.conf
if [ $VERSION = 11 ]
then echo 'net.ipv4.ip_local_port_range = 9000 65500' >> /etc/sysctl.conf
elif [ $VERSION = 10 ]
then echo 'net.ipv4.ip_local_port_range = 1024 65000' >> /etc/sysctl.conf
fi
sysctl -p
echo 'oracle soft nproc 2047' >> /etc/security/limits.conf
echo 'oracle hard nproc 16384' >> /etc/security/limits.conf
echo 'oracle soft nofile 1024' >> /etc/security/limits.conf
echo 'oracle hard nofile 65536' >> /etc/security/limits.conf
echo 'oracle soft stack 10240' >> /etc/security/limits.conf
echo 'Operate System and Kernel Parameter has been finished! '
echo 'Now You Can Run runInstaller to start Installation of Oracle! '
THE END
本文出自 “Xin23的流水账” 博客,香港空间,谢绝转载!
,香港虚拟主机,香港服务器
Hot Article

Hot tools Tags

Hot Article

Hot Article Tags

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics

Reduce the use of MySQL memory in Docker

How do you alter a table in MySQL using the ALTER TABLE statement?

How to solve the problem of mysql cannot open shared library

What is SQLite? Comprehensive overview

Run MySQl in Linux (with/without podman container with phpmyadmin)

Running multiple MySQL versions on MacOS: A step-by-step guide

How do I secure MySQL against common vulnerabilities (SQL injection, brute-force attacks)?

How do I configure SSL/TLS encryption for MySQL connections?
