When you install a new computer, how should you operate it to ensure that the system runs normally? This problem bothers many computer novices. Today, PHP editor Xinyi will give you a detailed explanation of the partitioning and system installation sequence of a newly assembled computer, guiding you to operate it correctly, saving time and effort!
Generally, after a computer is assembled, it is usually partitioned during the system installation process. For example, if you install Windows 7, after entering the installation program, the program will be loaded first, and then you will be prompted to partition. After the partition is completed, then Choose which disk to install to. Of course, there are also special partitioning tools that can partition first and then install the system.
is to first enter the BIOS to set the startup item. If you use a CD-ROM drive to install the system or partition program, select the CD-ROM drive to boot first. If it is a USB flash drive, set the USB flash drive as the first boot item, and then press F10 Save and restart. At this time, the machine will automatically start according to the startup items you set. If you install the system yourself, you will be prompted to partition during the installation process.
If the partition tool is loaded first, it will be partitioned first and then the system will be installed.
Partitioning disks on a new computer can help you better manage and organize your data. The following is a common method to partition a new computer's disk:
1. Open the "Disk Management" tool: In Windows operating system, you can press the Win X key and then select the "Disk Management" option to open the disk management tool.
2. Select the disk to partition: In the disk management tool, you will see all the disks and partitions on your computer. Select the disk you want to partition.
3. Shrink the volume: If there is already a primary partition or extended partition on the disk, you need to shrink the volume first to free up some unallocated space. Right-click the volume, select Shrink Volume, and follow the prompts.
4. Create a new partition: Right-click on the unallocated space and select "New Simple Volume". Follow the wizard's instructions to select settings such as partition size, drive number, and file system type.
5. Complete the partitioning: Follow the wizard's instructions to complete the partitioning process. Once the partitioning is complete, you will see the newly created partition in the Disk Management tool.
Please note that performing disk partitioning operations may result in data loss or disk damage. Before partitioning, please back up important data and make sure you understand the risks and impacts of partitioning. If you are not familiar with disk partition operations, it is recommended to consult professionals or refer to relevant operation guides.
The first step is to open the disk manager and enter the disk information interface.
Right-click Computer and click Manage. After entering the computer management interface, select Disk Management. After entering, you can partition the disk accordingly.
The second step is to calculate the size and drive letter of your partition.
The computer memory size is converted in units of 1024, that is, 1 MB = 1024KB, 1G = 1024 MB. Calculate the size of each drive letter before partitioning. For example:
500G hard drive can be divided into 100G, 200G, 200G. Then we need to divide it into 102400M, 204800M, and 204800M.
The third step is to create a new compressed volume to partition the disk.
Right-click the disk to be partitioned and select Compress Volume. After clicking, an interface to calculate the partition will appear. At this time, the computer will automatically detect the available partition size and wait for a while to enter the partition interface.
The fourth step is to enter the size of the partition and partition it.
Input the size you just calculated into the compression column. Don’t make a mistake. Be sure to read it correctly. Don’t enter one less zero or one more zero when entering. Be sure to check it before clicking OK. .
The fifth step is to set the drive letter of the partition.
The newly created partition does not have a drive letter. We need to assign it ourselves. Right-click the newly created disk, click New, which is the first option, and click Next. After the next step, the assigned drive letter will appear. interface, select the drive letter you want to assign and assign it.
The sixth step is, if there is a size allocation error in the partition, then it must be merged into a new partition.
First you need to delete the drive letter you just assigned. Only after deleting the drive letter can you merge the partitions. Right-click the disk you just divided and select Delete Volume.
The seventh step is to merge partitions.
This step is very important. If we want to merge it to that disk, right-click on that disk. However, it should be noted that it can only be merged into adjacent disks.
Right-click the disk you want to merge to and select Extend Volume. After selecting, a wizard interface will appear. Just follow the instructions step by step and click Next to the end.
Several possibilities may be that the partition table is abnormal and re-enter the PE to repair the boot;
It may be that the BIOS has not set the corresponding system mode. For example, the motherboard can be set to XP, WIN7, WIN10 mode, etc. ;
It may be that the partition does not correspond to the system mode. Re-partition select the corresponding partition mode and try reinstalling the system. hope this helps.
Tools/materials: chassis, mechanical hard drive, SATA interface cable, solid state drive, docking cable, screws.
1. First open the case and find the SATA interface cable on the motherboard.
2. Then find the hard drive bay in the chassis and place the mechanical hard drive.
3. Then fix the mechanical hard drive with screws.
4. Then find the SATA interface of the mechanical hard disk.
5. Then connect the SATA interface cable on the computer motherboard to the SATA interface on the mechanical hard drive.
5. Then pick a SATA interface cable on the motherboard.
6. Then connect the SATA interface cable on the computer motherboard to the SATA interface on the solid state drive.
7. Then find the location of the solid state drive.
8. Next, place the solid-state drive against the chassis board.
9. Finally, screw on the screws behind the chassis board on the other side to secure the solid state drive.
Use a U disk to install the computer or a CD, which contains partitioning tools. Use quick partitioning to first divide the solid state disk into two areas, and then divide it into three areas for the mechanical disk. You can adjust the partition disk capacity yourself or evenly distribute it.
Generally, after a computer is assembled, it is usually partitioned during the system installation process. For example, if you install Windows 7, after entering the installation program, the program will be loaded first, and then you will be prompted to partition. After the partition is completed, then Choose which disk to install to.
Of course, there are also special partitioning tools that can partition first and then install the system.
is to first enter the BIOS to set the startup item. If you use a CD-ROM drive to install the system or partition program, select the CD-ROM drive to boot first. If it is a USB flash drive, set the USB flash drive as the first boot item, and then press F10 Save and restart. At this time, the machine will automatically start according to the startup items you set.
If you install the system yourself, you will be prompted to partition during the installation process.
If the partition tool is loaded first, it will be partitioned first and then the system will be installed.
HP new computer partitioning method: 1. Press WIN If it is sufficient, you can right-click on it and select from the menu bar that pops up.
3. Then the compression volume dialog box will pop up. You need to enter the definition you want in the dialog box. the amount of disk space. Just enter the number and click the button at the bottom after entering it.
As for the size of the new Win10 partition, you can actually allocate it flexibly according to your actual needs.
4. After the above operation process is completed, you will find that there is an extra partition on the disk, but this disk cannot be used because no partition has been created on it. At this time, you need to continue to right-click on the new partition and select in the pop-up menu bar,
5. To continue the following guidance work, just click at the bottom of the dialog box,
6. Next, just continue to click until the next button no longer appears, but the button that appears. Click once to end.
7. This completes the creation of a new partition for Win10. , you can use the newly created partition normally. When you open this computer, you will find that there is an extra new hard disk partition.
How to partition Lenovo's new computer?
1. Press the "Windows logo key R key", enter "diskmgmt.msc" and click " OK"
2. Open the main interface of "Disk Management", select the partition that needs to be compressed, such as the D drive, right-click the mouse and select "Compress Volume"
3. In the "Enter the amount of compression space ”, enter the capacity to be compressed in MB. There is a maximum capacity that can be compressed, which is calculated by the system, so the number entered cannot be greater than the maximum value. After completing the input, click "Compress" to start the compression process. The length of the process depends on the amount of data. (The entire partition here is empty, so the maximum compression value is relatively large)
4. After the compression is completed, you can see that the original 20G partition was compressed into a 3G partition, and the compressed capacity became No space is allocated and the partition can be created again.
How to partition the hard drive on a new computer?
The above is the detailed content of Should a newly assembled computer be partitioned first or the system installed first?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
