Micro fire cabinets and cranes are widely used in construction, industry and other fields, and their assembly must follow standardized procedures. PHP editor Baicao will explain in detail the assembly steps of micro fire cabinets and cranes, from material preparation to component installation, guiding you step by step to complete the assembly. By reading this guide, you will get professional and practical assembly tutorials to help you assemble these devices easily.
1. Place the fire cabinet in a suitable position and install the anchor screws on the bottom holes of the fire cabinet. Pay attention to confirm the levelness of the fire cabinet, and adjust the height of the anchor screws to ensure the stability of the fire cabinet.
2. Install the upper cover and bottom plate on the frame of the fire cabinet and fix them with screws.
3. Install door lock accessories. Place the door lock into the door lock hole and secure it with screws. Insert the key into the door lock to check if the door lock is working properly.
4. Install sprinklers, water tanks and other accessories. According to the size of each water pipe opening designed in the fire cabinet, select appropriate sprinklers, water tanks and other accessories, and install them in the corresponding positions.
5. Install lighting fixtures. Select appropriate lighting fixtures as needed and install them inside the fire cabinet.
6. Inspect and test fire cabinets. After completing the assembly, check whether all components of the fire cabinet are working properly and verify whether the water, electricity and other functions of the fire cabinet are normal.
7. Perform maintenance and upkeep. Check the fire cabinet regularly to ensure it is in good condition. Timely replacement of parts and repairs and maintenance ensures that the fire cabinet is always in good condition.
Assembling the mini crane should be done step by step. At the beginning, the long arm is connected, and then the base is made. The power machine is placed on the base, the screws are installed, and then the long arm is connected by pulling the cable. Finally, install the adjusting basin and you're done.
Graphics card rtx2060 2500 yuan (supports ray tracing)
cpu R5 3600 1400 yuan
Motherboard: B450 600 yuan
m.2 Solid state drive 500G 600 Yuan
4T mechanical hard drive 600 yuan
Main case with fan + power supply 600w 500 yuan
Memory stick 8G two, 500 yuan
Keyboard and mouse 100 Yuan
Assembling a computer does require a checklist, because when we assemble the computer, after determining the configuration and operation requirements of the computer, we can purchase some suitable motherboards online, and then determine the power supply, graphics card and other configurations based on the motherboard. If you ask, just make a list and ask the computer factory or dealer directly to buy it
Assembling a computer can have some benefits, such as:
1. Customized configuration: Assembling a computer can choose suitable hardware configuration according to personal needs, and you can choose more based on your own purpose and budget. Suitable components.
2. Cost-effectiveness: Assembling a computer is more cost-effective than purchasing a brand-name machine. You can save costs by choosing hardware with higher cost-effectiveness.
3. Upgradeability: Assembling a computer is usually easier to upgrade the hardware. The hardware can be upgraded or replaced at any time as needed to improve the performance of the computer.
4. High degree of freedom: When assembling a computer, you can choose the appearance design, color matching, etc. according to your personal preferences, and you can create a unique computer.
However, there are also some challenges and risks in assembling a computer, such as requiring certain professional knowledge and skills, choosing inappropriate hardware that may lead to compatibility issues or poor performance, possible risks during the assembly process, etc. . Therefore, if you do not have enough experience and skills, or do not know much about computer hardware, it may be more suitable to buy a branded machine.
There are drawings when you buy a computer desk, just assemble it according to the drawings
1. First connect the VGA cable to the monitor, and then fix the two screws at the back. The main reason for fixing is to worry about the connecting wire falling off when moving.
2. Then connect the other end of the VGA cable to the computer host.
3. Next, connect the power cord to the monitor. (Note that you are only connecting to the monitor. Do not connect the other end of the power cord to the socket. Wait until all connections are completed before turning on the power.)
4. Next, connect the mouse to the host.
5. Connect the keyboard as well. (The green one is the mouse, and the purple one is the keyboard. Also note that the internal pins of the mouse and keyboard plugs must be aligned with the pinholes in the interface before they can be inserted.) Connect one end of the network cable to the RJ45 interface of the computer host, and then connect the other end to the switch or router or modem.
6. Next, connect the power cord of the host.
7. Next, you can connect the power plugs of the host and monitor to the sockets to power on the host and monitor. You can start and use it normally.
CPU Memory Motherboard Solid State Drive Power Supply and Chassis
1: Prepare hardware
Hardware includes CPU, graphics card, memory, motherboard, hard disk, chassis, power supply
2: Install CPU
1: Remove CPU, and to complete the installation of the CPU and the motherboard, we need to pay attention to the two grooves on the CPU in order to correctly install it into the CPU slot of the motherboard.
2: Open the upper cover of the slot by opening the lever of the motherboard CPU slot, and align the two grooves of the CPU with the bumps in the CPU slot to install it correctly.
3: The groove on the CPU is aligned with the CPU socket bump on the motherboard.
4: Apply thermal grease on the CPU
5: Align the plastic pin buckle of the radiator with the four round holes of the motherboard (around the CPU socket), and then use the corners to Press down hard to fix the CPU fan to the motherboard, and then connect the power supply cable of the radiator to the CPU FAN slot on the motherboard.
3: Install memory
One piece of memory can be installed into any motherboard memory slot. If you need to install two pieces of memory or four memory slots, we can install it into the black memory slot or In the white memory slot, you can build dual-channel memory.
Four: Install the hard drive
Install the M.2 solid-state drive. The motherboard can support three specifications of M.2 solid-state drives: 2242/2260/2280. Insert it into the M.2 slot. Press down the solid state drive and tighten the screws.
Five: Install the assembled motherboard into the chassis
Six: Connect the front audio interface of the chassis, marked with the word HD AUDIO. Find the front audio pin on the motherboard (the pin corresponding to the front audio interface, usually marked on the motherboard). The USB2.0 interface is also similar. There is a USB2.0 pin marked on the motherboard, just plug it in. .
Seven: Install the motherboard jumpers, which are POWER SW power switch, LED POWER /- power indicator light, H.D.D LED hard disk indicator light, and PESET SW restart.
Eight: To install the independent graphics card, open the fixing buckle at the end of the graphics card PCI-EX16 slot. After the graphics card is installed in place, the fixing buckle will automatically buckle.
9: Install the power supply. This chassis adopts a bottom power supply design. When we install the power supply, we need to pay attention to the direction of the power supply fan. The correct installation method is for the power supply fan to blow downward.
Ten: Find the 24pin cable of the power supply and insert it into the corresponding 24pin slot of the motherboard.
11: Find the 8pin CPU cable on the power supply (there is a CPU logo on the interface), and insert it into the interface close to the 8pin CPU. If it is a 4PIN CPU slot on the motherboard, you can tap the 8pin CPU cable interface.
Twelve: Find the PCI-E power supply cable and connect the graphics card’s external power supply cable as needed.
Twelve: Complete assembly.
To assemble this kind of computer with the highest cost performance in 2021, I recommend assembling Huawei’s. The computer is better because Huawei’s electronic products are of particularly good quality and relatively reliable, especially Huawei's computer spare parts are currently very good in China, so I recommend using Huawei's computer assembly, especially because its cost performance is relatively high, and the assembly configuration is also relatively high
The above is the detailed content of How to assemble a miniature fire cabinet? How to assemble a mini crane?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
