When assembling a computer, many friends encountered the problem of which CPU should be used with the ASUS H61 motherboard, and did not know how to choose the appropriate CPU. In this regard, php editor Xinyi brings you the ASUS H61 motherboard CPU matching recommendation, introduces the CPU models and performance characteristics that the motherboard is compatible with, and helps you easily configure your computer configuration. Please continue reading for details.
If you want cost-effectiveness
3A platform is the highest
Recommended configuration
Processor R5 2600 6 cores 12 threads, not much compared to 2600x The big difference is that the main frequency is reduced from 3.6/4.2GHz to 3.4/3.9GHz, and the TDP is also reduced from 95W to 65W. In other aspects, it is the same as the R5 2600X. Paired with ASUS b450m motherboard, Corsair 2400 8g memory, Toshiba 240g solid state, Yeston 580 graphics card, Cooler Master 500w power supply, any chassis you choose, you can replace it if you don’t like it
Host effect
Asus is a brand company from Taiwan. Its most famous products are computer motherboards and graphics cards. It is also a first-line brand that has attracted much attention and praise in the computer IT industry. ASUS is committed to providing individual and business users with the most innovative products and application solutions. Since the founding of the brand, Asus has produced laptops, computer motherboards, smartphones, LCD monitors, tablets, and other 3C products. Today, the editor will introduce how to use a USB flash drive to install the system on a computer assembled with an ASUS motherboard.
1. Insert the boot USB flash drive into the ASUS motherboard computer. Press F8 to bring up the boot menu during the restart process. Select the recognized USB flash drive and press Enter;
2. Boot into U disk menu, select Run PE system in the menu;
3. If partitioning is required, run the Diskgenius partition tool, delete the partition and then select;
4. Select the number of partitions and set each partition size, click OK to format;
5. Open the PE one-click installation, keep the default settings, select the location to be installed, such as C drive, and click OK;
6. Go to In this interface, perform the system decompression operation;
7. Then the computer automatically restarts, pull out the U disk, and start installing the system;
8. The subsequent installation process is performed automatically, wait The installation is complete. The above is a tutorial on how to use a USB flash drive to install the system on an ASUS motherboard computer. You can follow the above steps. I hope it will be helpful to you.
Pick up the chassis and lay it flat, grab the handle of the chassis baffle with your hand, pull it back, and the chassis baffle will be taken out.
1. Prepare tools and materials: You need to prepare all the tools and materials needed to assemble a computer host. This includes the computer host itself, monitor, keyboard and mouse, power supply, hard drive, memory stick, processor and radiator,
2. Open the host box: First, you need to open the host box for subsequent steps installation work. Usually, you can use a screwdriver to turn the screws on the corners of the main case, and then open the main case.
3. Install the power supply: The power supply is an important part of the computer host.
Purchase ASUS motherboard, ASUS graphics card, CPU, memory, hard drive, chassis and power supply and then install it.
Which model of board you can check the manual first. Generally, there is a detailed introduction in the manual about opening the core. There is no need to open the case. It is too extreme to open the battery or something. Generally, the option to enable the core is acc or in the bios. An option consisting of three words axxxcxxxxcxxx can disable it. Of course, different motherboard brands and different options will have different options. Some of the names are very straightforward, such as unlockcore. You can directly choose 2-core, 3-core, and 4-core (the key is to read the manual). If it is unstable, if you use dual-core, you can open 4-core. If you want to core, you can try to turn off a core, or choose an option such as -2%. If it still doesn't work after selecting it, then select restore default settings in the bios to restore it to the factory default state
1. Unlike laptops, the CPU core display and independent graphics card of desktop computers cannot be enabled at the same time in the operating system, that is, users can only use one graphics card.
2. When an independent graphics card is installed, the desktop computer motherboard will give priority to starting the computer from the independent graphics card by default. At this time, the user connects the monitor data cable to the independent graphics card, enters the operating system to install the driver, and then it can be used normally. If you want to use CPU core display, the first method is to remove the independent graphics card.
3. Connect the monitor data cable to the corresponding display port (VGA/DVI/HDMI) on the motherboard. When the computer is turned on, it will automatically select to boot from the nuclear display. Also enter the operating system and install the driver.
4. The second method is to connect the monitor to the independent graphics card without removing the independent graphics card. During the power-on self-test, enter the motherboard BIOS - Integrated Peripherals interface, find Init Dispay First (which graphics card should be started first), and change it to IGFX (built-in graphics card).
5. And make sure that the Internal Graphics (built-in display function) item is enabled (Enable or Auto). After the relevant settings are completed, shut down the computer and connect the monitor to the corresponding display port on the motherboard. Turn on the computer again. At this time, the computer should start from the CPU core display first.
6. Note: BIOS setting operations are different for different motherboards, and the user needs to have a good understanding of BIOS.
The method to turn off the nuclear display is as follows:
Step 1: First use the right button of the mouse, click "This PC" on the desktop, and select "Manage".
Step 2: Then in the management, click "Device Manager".
Step 3: Finally, click "Display Adapter", select the name of the core display that needs to be disabled, right-click the core display, and select "Disable". At this time, the nuclear display is successfully turned off and only the independent display is used.
Asus motherboard core setting requires the following steps: first enable the core display option in the BIOS, then enable the core display function in the operating system, and finally set up the corresponding graphics card driver. This allows independent graphics cards and core graphics cards to be used at the same time to improve graphics processing capabilities. It should be noted that different models of ASUS motherboards have different core configurations, and the specific setting methods may be different. In addition to the above setting methods, further optimization and adjustment can also be carried out through some software. For example, you can use the Intel Graphics Control Panel for settings and adjustments, which can improve the performance and stability of your graphics card. In addition, you can also use some hardware monitoring software to monitor and manage the temperature and power consumption of the graphics card to ensure the stability and security of the hardware.
Unlike laptop computers, the CPU core display and independent graphics card of desktop computers cannot be enabled at the same time in the operating system, that is, users can only use one graphics card.
2
/6
When a discrete graphics card is installed, the desktop computer motherboard gives priority to starting the computer from the discrete graphics card by default. At this time, the user connects the monitor data cable to the independent graphics card, enters the operating system to install the driver, and then it can be used normally. If you want to use the CPU core display, the first method is to remove the independent graphics card
3
/6
and connect the monitor data cable to the corresponding display port (VGA/DVI) on the motherboard /HDMI), it will automatically select to boot from the core display when booting, and also install the driver after entering the operating system.
4
/6
The second method is to first connect the monitor to the independent graphics card without removing the independent graphics card. During the power-on self-test, enter the motherboard BIOS - Integrated Peripherals interface, find Init Dispay First (which graphics card should be started first), and change it to IGFX (built-in graphics card). .
5
/6
And make sure the Internal Graphics (built-in display function) item is enabled (Enable or Auto). After the relevant settings are completed, shut down the computer and connect the monitor to the corresponding display port on the motherboard. Turn on the computer again. At this time, the computer should start from the CPU core display first.
6
/6
Note: BIOS setting operations are different for different motherboards, and users need to have a good understanding of BIOS
Asus computers can reinstall the system through the CD through the following steps:
1. Put the genuine DVD disc into the optical drive;
2. Restart the computer and click on the screen When the ASUS LOGO appears, press the key several times, select the optical drive (may be labeled "CD/DVD"), then press to boot with the Windows 7 installation CD;
3. After a few seconds, the words "Press any key to boot from cd..." will appear on the screen. At this time, you need to press any key on the keyboard to continue the CD-ROM boot. See the picture below:
4. CD-ROM boot After that, the following interface will appear continuously (estimated to take one minute):
5. The following default setting options will appear, taking the Simplified Chinese version as an example,,,, click:
6. Click;
7. After waiting for the installation program to start, the "Agree License Terms" window will appear. Check "I accept the license terms (A)" and click;
8. In the installation type In the selected screen, use the keyboard arrow keys or the mouse pointer to select;
9. Enter the partition interface and click;
10. Click to create a partition;
11. After setting the partition capacity, click;
12. If you use a new hard disk, or delete all partitions and recreate all partitions, the Windows 7 system will automatically generate a 100MB space to store the Windows 7 startup boot file. , the following prompt appears, click;
13. The disk status after creating the C drive, there will be a C drive, an unallocated space, and a 100MB space;
14. Same as the above method, please allocate the remaining hard disk space according to your usage needs;
15. Select the partition where you want to install the system and click;
16. Start the automatic installation of Window7 System (estimated to take ten minutes at the fastest);
17. It will automatically restart after the installation is completed (estimated to take two minutes);
18. Then the Windows startup interface will appear;
19. The installation program will continue to install automatically (it is expected to take ten minutes at the fastest);
The machine will automatically restart and the machine's startup program will be automatically installed.
The above is the detailed content of Assembling a computer What kind of CPU should I use with the ASUS H61 motherboard?. For more information, please follow other related articles on the PHP Chinese website!
How to create html with webstorm
The reason why header function returns 404 failure
How to switch settings between Huawei dual systems
How to Get Started with Buying Cryptocurrencies
How to set top text on WeChat
Basic usage of insert statement
Usage of boolean in java
Is Huawei's Hongmeng OS Android?
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
