Why does the assembled computer automatically restart?

Frequent problems with automatic restart of the assembled computer have troubled many computer players. PHP editor Baicao found that this problem often stems from a variety of factors, including hardware incompatibility, poor heat dissipation, unstable power supply, etc. This article will analyze this problem in depth, guide you step by step to identify the fault, and provide practical solutions.

Why does the assembled computer automatically restart?

1. The motherboard is not working properly. 1. There is too much dust in the chassis, and the motherboard and equipment are overheated.

Cleaning 2. The plug-in and plug-in parts of the motherboard are not firmly connected. Pull out the golden finger and then put it back. Be sure to ensure that the tenon is automatically stuck. Re-coat the CPU with silicone grease.

2. Poor power supply operation 1. The internal parts of the power supply box are too hot locally. Clean the heat dissipation holes and fan dirt.

2. The power supply is aging (or you have recently upgraded the hardware and the total power has increased), the output power does not match, the power supply is overloaded, and the power supply automatically protects and shuts down.

Clean up first and organize the cooling system. It should be solved. If it doesn't work, it is a hardware (power supply) problem.

Assembling the computer, why does it automatically restart with a blue screen?

1. If a program error occurs, a blue screen will occur. Sometimes there is just an error in a certain program or driver, which can usually be solved after restarting.

2. Improper addition of new hardware will result in a blue screen. Check that the new hardware is securely plugged in, unplug it, try another slot, and install the latest drivers.

Why does the newly assembled computer always restart automatically?

Did you not choose to shut down the computer when you shut it down? The system automatically updates the software when you go online, so it automatically restarts to complete the update. Please pay attention to the prompts yourself (the computer should have it)

Desktop assembly Why does the computer keep restarting automatically?

Restart failure will not happen for no reason, right? What did you do before restarting? What hardware was upgraded? You can elaborate.

There may be incompatibilities between systems or programs. Press F8 after booting until the advanced options appear, then let go. Select "Last Known Good Configuration" and press Enter to fix it. If it still doesn't work, press F8 to enter safe mode and restore. Download or reinstall the system.

Caused by excessive temperature of the CPU or other hardware, incompatibility or failure of the memory and graphics card.

The hard disk has bad sectors. Please use the system's built-in functions or software to repair the disk, or format the hard disk, repartition the system, and reinstall the system.

Power failure and voltage instability can also cause automatic restarts.

Driver incompatibility can also cause restarts.

Mainboard component failure.

Change the system's default automatic restart: Right-click My Computer/Properties/Advanced/Startup and Recovery Settings/Uncheck "Automatic Restart" in System Failure, then click OK and Apply Just restart your computer.

If the above method does not work and you cannot find the problem yourself, it is recommended to have it checked.

Go to the device manager and check if there are any conflicts with various drivers, and if there are any yellow ones! If it is possible that the device driver is incompatible with the system; then delete the drivers for the sound card, graphics card, network card and other devices, and then install the drivers one by one. Restart the computer after each device is installed to check which device it is. After the fault caused by the driver is detected, download the new version of the driver for the faulty device and then install it. Then clean the dust in the computer, clean the gold fingers of the memory, graphics card and other equipment, and reinstall the memory and other equipment.

Assembling a computer without a case, how to turn it on and restart it?

If you are assembling a computer without a case, you need to read the motherboard manual carefully. There is a row of short pins on the motherboard that are connected to the wires on the chassis. The short pins here are the switch, rest, hard drive light, power light, and yes, speakers and empty pins.

You use a small metal object, such as a key, to search for the pws two short pins on this row of short pins. As long as the metal object comes into contact with these two short pins, the phone will turn on. Then go to It will shut down when touched.

How to turn on and restart the computer without a case after assembling it?

1. First, make sure that the computer accessories and the motherboard are all connected properly.

2. Then we find the power-on pin position on the computer motherboard.

3. If your friend has There is a switch cable on the motherboard, we will use the switch cable to connect it to the motherboard

4. Make sure the operating system has been installed on the hard disk. Friends who have not installed the operating system can first prepare a USB boot disk

5. Power on the chassis and press the switch cable button. If you don’t have a switch cable, you can use a screwdriver to short-circuit the power and power-pins on the motherboard to trigger the computer to boot.

6. Those who have the operating system installed on the hard disk can directly enter the operating system. Those who do not have the operating system on the hard disk need to press the keyboard to enter the U disk boot, and then install the operating system on the computer. After the installation is completed, it can be used.

Does the computer automatically restart after decompression?

Solution to computer automatically restarting:

1. Caused before shutting down: playing games, watching videos, or operating large programs, or the computer is used for a long time. Wait patiently for the computer to recover and click on the computer. Restore every page on the screen, wait until it returns to normal before shutting down or performing other operations. If that doesn't work, just press the power button to shut down;

2. Frequently shut down and restart: Try to uninstall all downloaded software, drivers, patches, etc. If uninstalling the software is ineffective or you don’t know what was installed, restore the system through soft and then hard disk;

3. If the problem still cannot be solved, it is recommended to reinstall the operating system;

4. In terms of hardware, whether there are problems with the hard disk, memory, etc., and whether the temperature of the CPU and other hardware is high. If it is caused by hardware problems, it is recommended to send it to after-sales service.

Turn off the lights and the computer automatically restarts?

This situation is usually caused by hardware problems, especially failures caused by overheating of the power supply and CPU.

1. Cut off the power, open the case, clean the dust, especially the dust on the CPU fan, and check whether the CPU fan rotates normally.

2. Cut off the power, open the case, insert and remove the memory, wipe the golden finger part with an eraser, and re-insert it tightly (do not reverse it).

3. Insert and unplug the graphics card, wipe the golden finger part with an eraser, and re-insert it tightly (the buckle must be buckled).

4. Unplug the power cord, remove the motherboard button battery, wait three minutes, and then reinstall the motherboard.

5. If the above operations cannot solve the problem, it is recommended to send it to a repair center.

Will the computer automatically revert to the file after restarting?

This is because restoration software or hardware such as Restore Wizard, Freeze Point Restore, and Shadow System are installed on the computer.

After installing such products, they will intercept the reading and writing of the system in the background, and write the read and write content to a temporary directory, not actually writing it to the computer.

The system disk of the computer (usually the C drive) will be protected. In the protection mode, Trojans or viruses attacking the system are invalid. When the computer restarts, the temporary directory will be The files are deleted, so after booting the computer, the downloaded files disappear.

Does the computer automatically restart after shutting down?

1. Install and open 360 Security on your computer, scan for viruses, and if there are viruses, kill them immediately.

2. After ensuring that the computer was not infected, we found the human service in the security toolbox.

3. Open the manual service, enter: shut down and restart the computer, and search for solutions.

4. We found a solution, that is, the computer cannot shut down normally and always restarts automatically.

5. Next, let’s take a look at this solution and change the computer settings according to this solution to see if we have solved the problem.

6. The solution given by 360 Security Guard is: disable the wake-up matching of the network card Ethernet. In fact, if your computer won't shut down for this reason, you can simply unplug the network cable when shutting down without disabling network card wake matching. But this didn't solve the author's computer problem, so we had to try something else.

The above is the detailed content of Why does the assembled computer automatically restart?. For more information, please follow other related articles on the PHP Chinese website!