How to assemble drawers? How to assemble grid drawers?

WBOY
Release: 2024-06-01 09:29:00
Original
363 people have browsed it

Drawer assembly is a seemingly simple household task, but in fact there are tricks. PHP editor Yuzai will introduce you to the assembly method of drawers and solve the problems of "how to assemble drawers" and "how to assemble grid drawers". The following content will explain in detail the various steps of drawer assembly, covering the assembly skills of different types of drawers, and guide readers to easily master the drawer assembly skills, adding convenience to home life.

怎么组装抽屉? 格子抽屉怎么组装?

How to assemble the drawer?

The method of assembling the drawer is as follows:

1. First, drill the expansion screws into the plastic holes on the front and rear panels. Pay attention to the expansion screws and drill them tightly.

2. Then insert the rotating nut into each screw hole, paying attention to the alignment of the holes and screws.

3. Then insert the two side panels into the front plate to form a U shape.

4. Then insert the bottom plate into the U-shaped drawer.

5. Insert the back panel onto the drawer, and then cover the back cover on the drawer. Pay attention to the bottom plate and the drawer slot to fit without any gaps.

6. Tighten the second-layer nuts to ensure the tightness between the partitions.

7. Finally, fix the handle with long screws. Now you can assemble the drawer.

How to assemble grid drawers?

Regarding this question, 1. Prepare tools and materials: You need to prepare drawer boards, wooden tenons, screws, screwdrivers, hammers, woodworking glue and other tools and materials.

2. Assemble the side panels: Place the side panels upright on the table, use carpenter's glue to connect the side panels and the bottom panel, and then use a screwdriver to secure the screws together.

3. Assemble the front and rear panels: Place the front and rear panels on the side panels, use carpentry glue to connect the front and rear panels and side panels, and then use a screwdriver to secure the screws together.

4. Assemble the second side panel: Place the second side panel on the front and rear panels, use carpenter's glue to connect the second side panel and the bottom panel, and then use a screwdriver to secure the screws together.

5. Install the drawer guide rail: According to the size of the drawer guide rail, install the drawer guide rail on the inside of the side panel.

6. Assemble the drawer: Place the drawer board on the table, apply carpenter glue around the edges of the drawer board and the wooden tenons, then place the drawer board on the drawer rails and tap lightly with a hammer. Keep it firmly in place.

7. Install the drawer handle: Reserve the position of the drawer handle on the drawer front panel, and then fix the handle screw on the drawer front panel.

8. Complete the assembly: Gently push the drawer into the grid drawer, check whether the drawer is stable and flexible, and complete the assembly.

How to assemble bookcase drawers?

The assembly of bookcase drawers needs to be carried out according to the following steps:

1. The assembly of bookcase drawers needs to be carried out according to correct steps to ensure the stability and service life of the drawers.

2. If assembled incorrectly, the drawer may be unstable and easily shake or fall, affecting the use effect. Therefore, correct assembly steps are very important.

3. For specific assembly steps, please refer to the following points: (1) First assemble the four side panels and bottom panel of the drawer into a frame, paying attention to the correct angle and position. (2) Fix the front and rear panels at both ends of the frame, paying attention to the position and angle. (3) Install the slide rails and fix them on both sides of the drawer, paying attention to the position and angle. (4) Place the drawer on the slide rail, pay attention to the position and angle, and then test the stability and sliding condition of the drawer. (5) Finally, pull out the drawer, install the handle or handle, and complete the assembly.

How to assemble a computer desk?

1. First disassemble the machine and check whether the accessories are complete.

2, install the bottom plate first.

3. Install drawer slides and door hinges.

4, and then connect it to the base plate.

5, then install the side shelves.

6, then combine the two together.

7, then assemble the drawer.

8, install the upper panel.

9, then put the drawer on, and you're done.

How to assemble the drawers in the wardrobe?

The method of assembling the drawers in the wardrobe is as follows:

Put the filled three-in-one rubber stopper plate flat on the cloth, check that the hole spacing matches the drawing, and install it Three-in-one single link.

Nail the solid layer with wooden plugs and fix it under the wide side board. The large handle hole of the top panel is facing upward, the other solid layers are facing downward, and the large handle hole of the foot line is facing inward.

After the two solid layers are fixed to the side plates, tighten the large handle at the same time.

Put the three-in-one rubber particles into the drawer hole ①; connect the ② and ③ side panels with the drawer surface; use the two-end solid layer ¢3.5*40 screws to connect ④ with ② and ③ to connect the side panels and the plywood ; Pull out the back panel ⑤ into the grooves of ② and ③, fix it under the back panel ④ with small iron nails, and install the built-in handle (the drawer must be square and maintain a 90° angle).

Add a 2mm gap from the two drawer panels to the center of the track eye. Remove the mother rail and draw a transverse line on the side panel of the cabinet using a 90° angle ruler based on the measured data. This transverse line It is the center eyeline of the mother track. The drawer panel is inserted into the column, so draw a vertical tangent line 19mm inward from the outside of the cabinet side panel. The bus rail is flush with the vertical tangent line, the center eye is flush with the transverse tangent line, and the screws are installed on the horizontal eye of the bus bar (adjustable position).

How to assemble the suspended drawer of the desk?

The steps to assemble the desk suspended drawer are as follows:

First, determine the location of the drawer and mark the installation points.

Then, use an electric drill to drill holes in the wall, making sure the depth and diameter of the holes are suitable for installing expansion bolts.

Next, insert the expansion bolt into the hole and secure it with a wrench.

Then, fix the drawer slides on the desk to ensure the correct position.

Next, connect the drawer slide rails to the expansion bolts on the wall to ensure firmness and stability.

Finally, put the drawer into the slide rail and test whether the drawer can slide smoothly. After ensuring that all connections are tight, you can complete the assembly of the desk's suspended drawer.

How to install computer desk drawer?

The installation steps of the computer desk drawer are as follows

1. Determine the position and direction of the drawer and fix the drawer track on the table.

2. Assemble the drawer bottom and side panels, and then fix the drawer bottom to the drawer track.

3. Fix the drawer front panel to the drawer side panel, and then assemble the drawer front panel and side panel.

4. Finally, pull the drawer out and check whether it is firmly installed. If it is loose, it needs to be readjusted.

The above is the detailed content of How to assemble drawers? How to assemble grid drawers?. For more information, please follow other related articles on the PHP Chinese website!

source:xtzjcz.com
Statement of this Website
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn
Popular Tutorials
More>
Latest Downloads
More>
Web Effects
Website Source Code
Website Materials
Front End Template
About us Disclaimer Sitemap
php.cn:Public welfare online PHP training,Help PHP learners grow quickly!