What are the essential steps when assembling a computer? PHP editor Youzi takes you through the basic process of assembling a computer, from preparing materials to completing installation, guiding you step by step in assembling a computer of your own.
Step 1 of assembling a computer
The first is the installation of the chassis, which mainly involves unpacking the chassis and installing the power supply in the chassis, then installing the motherboard and installing the motherboard on the chassis motherboard , assemble the computer and then install the CPU, insert the required CPU into the motherboard processor socket, and install the cooling fan, assemble the memory module in the computer, and insert the memory module into the motherboard memory slot.
Assemble the computer step 2
The next step is to install the graphics card, select the appropriate slot according to the graphics card bus; assemble the computer and install the sound card. Most of the mainstream sound cards in the market now are sound cards with PCI slots; The installation of drives mainly focuses on the installation of hard disks, optical drives and floppy drives; then there is the assembly of the connections between the computer chassis and the motherboard, that is, various indicator lights and power switch wires. The connection of PC speakers, as well as the connection of power cables and data cables of hard disk, optical drive and floppy drive.
Step 3 of assembling a computer
The third step of assembling a computer is to close the chassis cover. Theoretically, after installing the host, you can close the chassis cover, but in order to avoid problems later For inspection, it is best not to cover it first, and then cover it after the system is installed. Then there is the installation of input devices. When assembling the computer, you also need to connect the keyboard and mouse to integrate with the host; the installation of output devices, that is, the installation of the monitor; and then Recheck each wiring connection and prepare for testing.
Step 4 of Assembling a Computer
Assemble the computer and power up the machine. If the monitor can display normally, it means that the initial installation has been correct. At this time, enter the BIOS for initial system settings. After completing the above steps of assembling the computer, the general hardware installation is basically completed, but to make the computer run, the following installation steps are required.
Step 5 of assembling a computer
The next step is to assemble the computer's partitioned hard drive and format the hard drive, and install the operating system, such as Windows 98 or Windows XP. After assembling the computer and installing the operating system, install drivers such as graphics card, sound card and other drivers; perform a 72-hour bake-in. If there is a hardware problem, it will be discovered during the 72-hour bake-in.
Steps:
1. Assemble a new computer, turn it on and click the Delete key;
2. Enter the motherboard BIOS and enable AHCI of the SATA interface;
3 , set the optical drive startup or U disk startup, click F10 to save the settings;
4. Restart, use the CD system disk or U disk startup disk to install the WIN7 Ultimate 64-bit SP1 system;
5. After the system is installed, use the CD that comes with the motherboard to install the relevant hardware drivers and motherboard-specific software. If you have an independent graphics card, use the CD that comes with the graphics card to install the graphics card driver;
6. Plug in the network cable, connect to the network correctly, and you can access the Internet. Finally, download and install 360 Security Guard, run it for immediate physical examination, download and install system patches and optimize them.
1. Installation of instrument panel and on-site one-time point
During the formal installation process of electrical instruments, the installation foundation should be to make steel channels first. Nowadays, the production equipment of instruments is gradually improved, and most companies are equipped with steel channels in the production process, which provides powerful conditions for the efficient installation and debugging of instruments. Next, install the operation console and instrument panel. Before construction, the exact location, quantity, size, etc. of the reserved holes should be strictly verified. In addition, it is also necessary to accurately verify the direction and location of the pipeline entering and exiting the control detection room, and finally install it.
2. Installation of process piping and equipment
After the installation of the instrument control testing room and various equipment is completed, the process piping and equipment must be installed. During the actual installation process, it is necessary to carefully check the number and location of the process pipelines installed, and then proceed accurately according to the established construction design plan. This can prevent non-standard parts from malfunctioning during the installation process and make the entire installation process rigorous.
3. Installation and inspection of instruments
Before installation, the instrument must be inspected to ensure the integrity and non-destructiveness of the installed instrument. It also provides guarantee for subsequent construction quality and normal use. In addition, this step can also perform a complete test on the instrument used to ensure the normal use of the instrument.
4. Install protection boxes and instrument wiring
After the installation of electrical instruments, you should continue to install instrument protection facilities, so as to avoid damage to instrument equipment by other facilities. In addition, installing accessories such as fixed brackets can also fix the instrument to reduce damage to the instrument from external forces. In corresponding operations, instrument wiring and pneumatic pipes are professionally installed by the personnel who install the wiring. Instrument protection facilities are also an issue that needs to be considered during installation, which can make the entire wiring construction more convenient and also improve the safety and durability of instrument installation.
5. Debugging electrical instruments
After completing the installation of the instrument, the debugging staff should connect the control detection system and the electrical instrument system as soon as possible, and then carry out testing and debugging of the corresponding system engineering, promptly identify problems with the equipment, and conduct calibration and testing of the entire system. run. In this way, the entire installation process is basically completed. In view of the needs of the actual operation of electrical instruments, comprehensive inspections of the entire operating system should be carried out from time to time, and problems that occur should be dealt with in a timely manner to ensure the normal operation of the system.
High difficulty, high technology, wide range of personnel, and many types are the main characteristics of the installation and debugging of electrical instruments. Therefore, when installing and debugging electrical instruments, staff should pay attention to the installation and debugging of electrical instruments in the entire system project. play an important role, strictly refer to the design plan and technical requirements, and take timely and effective protective measures in the follow-up work to ensure the safe operation of the installation and debugging of electrical instrumentation equipment.
Graphics card rtx2060 2500 yuan (supports ray tracing)
cpu R5 3600 1400 yuan
Motherboard: B450 600 yuan
m.2 Solid state drive 500G 600 Yuan
+ 4T mechanical hard drive 600 yuan
Main case with fan + power supply 600w 500 yuan
8G two memory sticks, 500 yuan
Keyboard and mouse Checklist for assembling a computer for 100 yuan
Assembling a computer does require a checklist, because when we assemble the computer, after determining the configuration and operation requirements of the computer, we can purchase some suitable motherboards online, and then determine the power supply, graphics card and other configurations based on the motherboard. If you ask, just make a list and ask the computer factory or dealer directly to buy it
Assembling a computer can have some benefits, such as:
1. Customized configuration: Assembling a computer can choose the appropriate hardware configuration according to personal needs, and you can choose more based on your own purpose and budget. Suitable components.
2. Cost-effectiveness: Assembling a computer is more cost-effective than purchasing a branded machine. You can save costs by choosing more cost-effective hardware.
3. Upgradeability: Assembling a computer is usually easier to upgrade the hardware. The hardware can be upgraded or replaced at any time as needed to improve the performance of the computer.
4. High degree of freedom: When assembling a computer, you can choose the appearance design, color matching, etc. according to your personal preferences, and you can create a unique computer.
However, there are also some challenges and risks in assembling a computer, such as requiring certain professional knowledge and skills, choosing inappropriate hardware that may lead to compatibility issues or poor performance, possible risks during the assembly process, etc. . Therefore, if you do not have enough experience and skills, or do not know much about computer hardware, it may be more suitable to buy a branded machine.
There are drawings when you buy a computer desk, just assemble it according to the drawings
1. First connect the VGA cable to the monitor, and then fix the two screws at the back. The main reason for fixing is to worry about the connecting wire falling off when moving.
2. Then connect the other end of the VGA cable to the computer host.
3. Next, connect the power cord to the monitor. (Note that you are only connecting to the monitor. Do not connect the other end of the power cord to the socket. Wait until all connections are completed before turning on the power.)
4. Next, connect the mouse to the host.
5. Connect the keyboard as well. (The green one is the mouse, and the purple one is the keyboard. Also note that the internal pins of the mouse and keyboard plugs must be aligned with the pinholes in the interface before they can be inserted.) Connect one end of the network cable to the RJ45 interface of the computer host, and then connect the other end to the switch or router or modem.
6. Next, connect the power cord of the host.
7. Next, you can connect the power plugs of the host and monitor to the sockets to power on the host and monitor. You can start and use it normally.
CPU Memory Motherboard Solid State Drive Power Supply and Chassis
The basic steps for assembling a hamburger machine are as follows:
1. Preparation work: Inventory the parts and accessories of the hamburger machine to ensure that all parts are complete and clean.
2. Install the base: Place the base on a stable workbench, and use a screwdriver or wrench to fix the base on the workbench according to the position of the fixing holes on the base.
3. Install the pressure plate: Place the pressure plate on the pressure plate bracket on the base, making sure the pressure plate is aligned with the base. Use a screwdriver or wrench to secure the pressure plate to the base according to the position of the fixing holes on the pressure plate bracket.
4. Install the handle: Insert the handle into the handle hole on the pressure plate and ensure that the handle and the pressure plate are tightly connected.
5. Install the mold: Select the corresponding mold according to the burger shape you need to make. Place the mold on the mold holder on the platen, making sure the mold is aligned with the platen. Use a screwdriver or wrench to fix the mold on the pressure plate according to the position of the fixing holes on the mold bracket.
6. Adjust the thickness: According to the thickness of the burger you need to make, use the adjustment screw or knob to adjust the distance between the pressure plate and the mold to control the thickness of the burger.
7. Complete assembly: Check whether all parts are firmly installed and ensure that all parts of the burger machine are in normal working order.
After completing the above steps, the burger machine can be used normally. During use, put patties or other ingredients into the mold as needed, and then apply downward pressure with the handle to press the ingredients into a burger shape. Finally, take out the prepared burger.
The above is the detailed content of What are the basic steps to assemble a computer?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
