After assembling a computer, you usually encounter a problem: how to turn it on correctly. Although assembling a computer is not complicated, it can cause problems if you don't understand the startup steps. PHP editor Apple will introduce you in detail the steps to start up your computer after assembling it, helping you to easily start up and use your new computer.
After the computer is assembled, make sure that all the internal power cords are connected in place. After confirmation, connect the power supply and start the computer directly.
There is no need for you to do anything. Once the computer starts up normally, it means that the computer has been successfully assembled.
Then enter the system and see if it can operate normally. It is best if it can continue to run for a period of time. If it does not malfunction, it means that your computer is installed well.
After all the wires are connected, power on and start directly to light up.
The installation method is as follows
1. Prepare the system installation disk or USB boot installation disk.
2. Set the BIOS to boot first. If the system disk is set to CD-ROM boot, if the USB boot disk is set to USB boot.
3. Press any key to enter the installation interface, select the correct installation method and installation drive letter, the system will automatically install the system, we only need to wait for the end, but you need to operate it at certain times, such as: time, Language settings, etc.
4. After the installation is completed, it is still not working, because some system disks may come with some drivers, but it is recommended to install the latest drivers.
After assembling the computer, you need to install the operating system for normal use. The following are some steps to install the operating system:
1. Prepare the installation media: If you have purchased the operating system installation CD or USB boot disk, you can use it directly; if not, you need to download the operating system image file first and It is written to a CD or USB bootable disk. Common operating systems include Windows, Linux, etc.
2. Set the boot sequence: Set the boot sequence in the BIOS to boot from the CD or USB boot disk. The specific operation method varies depending on the motherboard. Generally, you need to press F2, F10, Delete and other keys when booting to enter the BIOS setting interface.
3. Insert the installation media: Insert the installation CD or USB boot disk into the computer, and then press the power button to start the computer.
4. Install the operating system: Install the operating system according to the installation interface prompts. First, you need to select the installation language and regional settings, and then follow the installation wizard step by step to complete the installation. It should be noted that during the installation process, you will be prompted to select the installation location and partition settings. It is recommended to set them according to the actual situation.
5. Install the driver: After the installation is completed, you need to install the driver for the corresponding hardware to ensure the normal operation of the hardware. You can download the latest drivers from the official websites of hardware manufacturers such as motherboards, graphics cards, sound cards, etc., and then install them according to the prompts.
It should be noted that before installing the operating system, it is recommended to back up important data to avoid accidental loss. In addition, the installation steps of different operating systems may be slightly different. For specific operation methods, you need to refer to the installation guide of the operating system.
1. Open the downloaded Xiaobai system, plug the USB disk into the computer, and wait for a few seconds to check the local environment.
2. Select on the Xiaobai system interface, automatically recognize the U disk, click .
3. Select the win10 system professional version we need to install, and continue to click .
4. Start downloading the system image and driver, and making the U disk boot tool. Wait for the prompt to pop up when the creation is successful. Click on it. At this time, you can unplug the USB flash drive and insert it into the new computer where the system needs to be installed.
5. At this time, you can unplug the U disk and insert it into the new computer where the system needs to be installed. The Xiaobai system interface will appear. We choose to start win10x64PE (more than 2G memory) and press Enter to confirm.
1. On the system page, click Reinstall Now
2. Wait for the system to download
3. After the download is completed, click Restart Now
4. Click Select Windows7 system
5. Finally, the installation is successful
1. First, you need to buy an independent sound card online or in the market. Choose according to your own needs. 2. If it is a PCI sound card, we need to shut down the computer and open the case to replace the PCI sound card. If it is a USB sound card, Just connect the sound card directly to the USB interface 3. After installation, you can boot into the bios, shield the motherboard sound card, find the audio related options in Advanced, and change the settings inside to Disabled. 4. We don’t need to disable it if possible. Turn on the computer directly, and then use the driver CD to install the sound card driver. After installation, when you need to use it, after connecting to the relevant recording and playback equipment, directly right-click the small speaker in the lower right corner to select the sound card device. 5 This is the end of the independent sound card installation tutorial. The key It's a driver problem, the driver must be installed. Sound Card is also called audio card (called sound effect card in Hong Kong and Taiwan): Sound card is the most basic component of multimedia technology and is a kind of hardware that realizes the mutual conversion of sound waves/digital signals. The basic function of a sound card is to convert original sound signals from microphones, tapes, and compact discs, and output them to sound equipment such as headphones, speakers, amplifiers, and recorders, or to make musical instruments emit beautiful sounds through the Music Equipment Digital Interface (MIDI).
After assembling the computer, you need to do the following things:
1. Set up the BIOS for the computer and identify the various hardware used to assemble the computer. You can enter the BIOS through the computer's esc key or delete key for settings;
2. You need to partition the hard disk. After partitioning the hard disk, you can store files accordingly;
3. Install the system for the computer through a CD or U disk. Now you can install it according to the computer configuration. You can also install Windows The computer can now be officially put into use.
How to set up the system after assembling the computer?
Looks like your accessory doesn’t have a CD-ROM drive. Let’s not talk about installing the system from the CD. Prepare a U disk with a slightly larger capacity and the next U Master U disk boot disk creation tool. Run the program on the computer to make your U disk into a boot disk (it will format the U disk. data), download a win7/8/10 iso or gho system file and put it in the corresponding folder in the U disk (iso or gho folder). Insert the U disk into the new machine, boot into the bios to set the U disk boot, restart the computer. Select win8PE new machine mode, the computer will enter the desktop and automatically run the installation system. If your gho/iso file is placed in the correct location, the installation options will be automatically selected. Just go to the next step. The new hard drive can be partitioned.
After assembling the computer in Jingyue, you need to install the operating system to use the computer normally. The following are the steps to install the Windows 10 operating system:
2. Enter the BIOS setup: Insert the installation media into the computer, restart the computer and enter the BIOS setup interface. In the BIOS setting interface, set the boot sequence to boot from the CD or USB flash drive.
3. Start the installation: After saving the BIOS settings, the computer will boot from the installation media. Follow the installation wizard prompts, select language, time zone, keyboard layout and other options, and then click "Next" to continue.
4. Authorization and installation type: During the installation process, you need to enter the Windows 10 authorization code and select the installation type. If you have purchased a Windows 10 license, you can enter the authorization code to activate it. If you do not have an authorization code, you can choose a trial version or purchase a license.
5. Installation completed: During the installation process, the system will automatically perform operations such as partitioning and formatting. After the installation is complete, you need to set a username and password and perform some basic settings such as network connection, updates, etc.
It should be noted that before installing the operating system, it is recommended that you back up important data to avoid data loss. At the same time, in order to ensure the stability and security of your computer, it is recommended that you update the system and drivers in time after installing the operating system.
The above is the detailed content of How do you turn on your computer after assembling it yourself?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
