Computer bed assembly? How to assemble a computer?

Computer bed assembly and computer assembly are problems encountered by many people. PHP editor Xiaoxin will show you how to easily assemble computer beds and computers, allowing you to enjoy the fun of DIY. The following content will introduce the assembly process in detail to help you complete the task smoothly.

Computer bed assembly?

There are drawings when you buy a computer desk, just assemble it according to the drawings

How to assemble a computer?

1. First connect the VGA cable to the monitor, and then fix the two screws at the back. The main reason for fixing is to worry about the connecting wire falling off when moving.

2. Then connect the other end of the VGA cable to the computer host.

3. Next, connect the power cord to the monitor. (Note that you are only connecting to the monitor. Do not connect the other end of the power cord to the socket. Wait until all connections are completed before turning on the power.)

4. Next, connect the mouse to the host.

5. Connect the keyboard as well. (The green one is the mouse, and the purple one is the keyboard. Also note that the internal pins of the mouse and keyboard plugs must be aligned with the pinholes in the interface before they can be inserted.) Connect one end of the network cable to the RJ45 interface of the computer host, and then connect the other end to the switch or router or modem.

6. Next, connect the power cord of the host.

7. Next, you can connect the power plugs of the host and monitor to the sockets to power on the host and monitor. You can start and use it normally.

Assemble computer configuration?

CPU Memory Motherboard Solid State Drive Power Supply and Chassis

How much does it cost to assemble a computer?

Graphics card rtx2060 2500 yuan (supports ray tracing)

cpu R5 3600 1400 yuan

Motherboard: B450 600 yuan

m.2 Solid state drive 500G 600 Yuan

+ 4T mechanical hard drive 600 yuan

Main case with fan + power supply 600w 500 yuan

8G two memory sticks, 500 yuan

Keyboard and mouse 100 yuan

List of computers to assemble?

Assembling a computer does require a checklist, because when we assemble the computer, after determining the configuration and operation requirements of the computer, we can purchase some suitable motherboards online, and then determine the power supply, graphics card and other configurations based on the motherboard. If you ask, just make a list and ask the computer factory or dealer directly to buy it

Assemble the computer, okay?

Assembling a computer can have some benefits, such as:

1. Customized configuration: Assembling a computer can choose the appropriate hardware configuration according to personal needs, and you can choose more based on your own purpose and budget. Suitable components.

2. Cost-effectiveness: Assembling a computer is more cost-effective than purchasing a branded machine. You can save costs by choosing more cost-effective hardware.

3. Upgradeability: Assembling a computer is usually easier to upgrade the hardware. The hardware can be upgraded or replaced at any time as needed to improve the performance of the computer.

4. High degree of freedom: When assembling a computer, you can choose the appearance design, color matching, etc. according to your personal preferences, and you can create a unique computer.

However, there are also some challenges and risks in assembling a computer, such as requiring certain professional knowledge and skills, choosing inappropriate hardware that may lead to compatibility issues or poor performance, possible risks during the assembly process, etc. . Therefore, if you do not have enough experience and skills, or do not know much about computer hardware, it may be more suitable to buy a branded machine.

The most cost-effective computer assembly recommendation in 2021?

To assemble this kind of computer with the highest cost performance in 2021, I recommend assembling Huawei’s. The computer is better because Huawei’s electronic products are of particularly good quality and relatively reliable, especially Huawei's computer spare parts are currently very good in China, so I recommend using Huawei's computer assembly, especially because its cost performance is relatively high, and the configuration of the assembly is also relatively high

How to simulate computer assembly online_Simulate computer assembly configuration list?

1. There are too many places where you can simulate the installation online. Search for Zhongguancun Online Simulation Installation and open it.

2. After opening, we can take a look at everyone's plans, and then simulate building a computer ourselves. Here we select the computer configuration the same way. Such as CPU, motherboard, memory, graphics card, hard drive, power supply, etc., accessories. as the picture shows.

3. Processor CPU, this is more critical. We choose INTEL core processor or AMD core processor according to our needs, select the CPU series, and then add our favorite CPU to the configuration list. . Today's CPUs are usually divided into boxed and bulk. It is recommended that you choose boxed CPU.

4. After adding the CPU to the configuration list, select the motherboard and set and select one by one.

5. Motherboard Here you have to decide whether to buy a motherboard with an integrated graphics card or a non-integrated motherboard graphics card. If the motherboard has an integrated graphics card, we can save the expense of buying a separate graphics card later. If we don’t finish big games, For home office, etc., we can just choose a motherboard with integrated graphics card, which should be enough for our daily use. The editor has seen many people who can't finish any online games, so they have to buy a motherboard with independent graphics card, which will increase their expenses.

6. In this way, all the required accessories will be added to the installation configuration list. If the keyboard and mouse are for home use, a set will cost around 50 yuan.

7. Finally, our installed configuration list will be displayed on the right. Of course, if you feel that the price is cheap, you can delete the accessories here, then reselect a better hardware configuration, replace the CPU or motherboard, etc. Just make the price meet your expectations and the computer can meet your daily needs.

Is there a big difference between assembling a tablet computer and assembling a desktop computer?

Desktop computers: including branded machines and assembled machines. Branded machines generally have poor configurations and low cost performance, so sell only one brand. The assembly machine is cost-effective and has good performance. Of course, the premise is that you know the knowledge of DIY configuration hardware.

Laptop computers: Highly portable, generally used for office work, poor gaming performance, and the configuration of assembled computers of the same price is much higher than that of notebooks.

All-in-one computer: It is a brand-name computer. It is expensive and has low configuration. It is not recommended to buy.

Tablet computer: It is a small personal computer that is more portable than a laptop computer and uses a touch screen as the basic input device. But it is different from the former system and has much fewer functions.

Detailed explanation of the steps to assemble a computer?

To assemble a computer, please refer to the following steps:

1. First install the CPU, install the CPU fan and CPU together on the motherboard, and fix the screws.

2. Install the memory, insert the memory into the memory slot of the motherboard, and make sure the memory is inserted correctly to avoid compatibility issues.

3. Install the hard drive, fix the hard drive on the 3.5-inch hard drive bracket of the chassis, and insert it into the SATA interface of the motherboard.

4. Install the graphics card, insert the graphics card into the PCI-E slot of the motherboard, and fix the screws.

5. Install the power supply, insert the power supply into the chassis and secure the screws.

6. Install the optical drive. If you need to use the optical drive, insert it into the optical drive compartment of the chassis and fix the screws.

7. Connect the front panel cable of the chassis, find the corresponding interface and insert it into the corresponding interface of the motherboard.

8. Install the operating system and drivers. You can get the corresponding CD or download the corresponding driver when purchasing the hardware

The above is the detailed content of Computer bed assembly? How to assemble a computer?. For more information, please follow other related articles on the PHP Chinese website!