Assembling computers is nothing new, so can Lenovo computers be assembled by ourselves? Is it also possible to DIY a tablet? How to do it? PHP editor Xiaoxin will answer them one by one for you. Here is a detailed introduction for you, let’s find out together.
DIY is of course possible. There are no technical barriers to this now. As long as you understand a little bit about the basic components and related knowledge of computers, you can assemble your own computer.
Generally speaking, to successfully assemble a computer, you need to purchase the following components:
1. Motherboard
2. CPU that matches the motherboard
3. Graphics card
4, memory
5, hard disk
6, sound card
7, network card
8, chassis and power supply
9, keyboard
10, mouse
11, monitor
OK, now you can build a computer with these, some internal jumpers and wiring , you can refer to the motherboard manual.
This is unlikely. Let alone tablets, can you assemble a notebook?
The reason why tablets are so popular is because the screen is larger than that of mobile phones and is not tiring. The eyes are highly integrated and only slightly larger than a mobile phone. For such highly integrated products, there is no assembly market at all, because unlike desktop computers, there is a unified interface standard, sufficient space for placement, and consistent input and output device standards. Tablet devices are different and require a relatively stable operating environment. To achieve this environment, ultra-integrated manufacturing must be achieved. That is, the memory, processor, graphics card, etc. are integrated on one motherboard, unlike desktop computers that can be plugged in and assembled at will. Moreover, the smaller the size, the better, and the speed must be ensured.
The above reasons are all to give the tablet a beautiful appearance and as thin a space as possible. In addition, the interface standards of screens are different, and the screen size and thickness requirements are different. Therefore, the casing must be designed according to the motherboard and screen. With random assembly, it is difficult to unify the standards of screens and motherboards. And it is difficult to control the size, which affects the aesthetics of the tablet.
It’s absolutely possible, you just need to use the shell to assemble it yourself. Generally speaking, to successfully assemble a computer, you need to purchase the following components:
1, motherboard
2, CPU matching the motherboard
3, graphics card
4, memory
5, hard disk
6, sound card
7, network card
8, chassis and power supply
9, Keyboard
10, mouse
11, monitor
OK, now you can build a computer. For some internal jumpers and wiring, please refer to the motherboard manual.
MAC signs should not assemble ordinary compatible computers. Because when MAC first appeared, it adopted a standard that was incompatible with ordinary computers. Just because different hardware standards are implemented on the hardware, the internal components of the two cannot be used universally. The specifications of the internal components of the two machines are also different. In terms of the price-performance ratio of the internal structure, both have their own advantages and disadvantages.
The buzzer is a way for the computer motherboard to detect the working status and convey the working status to the user with a sound signal. It uses different lengths and intervals to express the computer's working conditions and causes of failure. In recent years, most motherboard manufacturers have integrated this device into the motherboard or provided a small two-wire buzzer as an accessory to the motherboard.
Therefore, some chassis manufacturers also use the buzzer as an optional part or accessory, and do not install it directly on the chassis. If you purchase a brand new accessory, the buzzer can be installed or not, and it will not affect the normal operation of the host.
Of course, the cost performance of assembled machines is generally higher than that of branded machines.
Of course you can watch the assembly when you buy a computer. Assembling computers is now very popular. If you have requirements, there is no problem in watching the assembly. It usually takes about 20 minutes to install a computer and about 20 minutes to install a system. It takes about 20 minutes, that is to say, after the computer is installed and the system is installed, it takes about an hour. When you buy a computer and watch it being assembled, you can ask the technician what each component is used for, and you can also see each component. The installation position also facilitates convenient and simple maintenance by yourself in the future.
However, some businesses are unwilling to let customers watch technicians assemble computers. He feels that the more customers understand, the harder it will be for businesses to make money. In fact, merchants are overthinking it. Nowadays, customers’ computer skills are getting higher and higher, and this knowledge has no technical content.
Assembled computers can be installed with Bluetooth. The installation of Bluetooth is not necessarily related to whether the computer is assembled. Branded computers can be installed with Bluetooth, and computers assembled by yourself can also be installed with Bluetooth. You can consider the very cheap USB mode Bluetooth currently sold online. Just like a wireless mouse, plug the USB 1 port into the computer, and then scan it through other Bluetooth devices, and then you can use Bluetooth normally. !
Can be matched at will. CPUs on the market are mainly produced by Intel and AMD. Due to different interfaces, the matching motherboards are also different. When assembling a computer, the CPU interface of the motherboard must be consistent with the CPU. For example :I5 CPU cannot be installed on AMD motherboard (the pin interface is different).
Other accessories can be assembled at will as long as the interface matches the motherboard. For example: if the motherboard supports SATA interface, you can use SATA interface Hard disk and optical drive. If the motherboard does not have an IDE interface, you cannot directly install the IDE hard disk and optical drive. If the motherboard can only install DDR3 memory, you cannot use DDR2 memory.
It is best to find an acquaintance to help you assemble the computer. You can assemble and assemble the computer at Ushibashi Jiushun Plaza
The above is the detailed content of Can Lenovo computers be assembled? Can I assemble my tablet myself? How to assemble it?. For more information, please follow other related articles on the PHP Chinese website!