How to install a sound card when assembling a computer?

Is it a problem to install the sound card when assembling a computer? PHP editor Strawberry brings you a detailed tutorial! The following article will introduce you to how to install a sound card into an assembled computer, including the necessary steps and precautions. Come find out and solve your sound card installation problems!

How to install a sound card when assembling a computer?

1. First, you need to buy an independent sound card online or in the market. Choose according to your own needs. 2. If it is a PCI sound card, we need to shut down the computer and open the case to replace the PCI sound card. If it is a USB sound card, Just connect the sound card directly to the USB interface 3. After installation, you can boot into the bios, shield the motherboard sound card, find the audio related options in Advanced, and change the settings inside to Disabled. 4. We don’t need to disable it if possible. Turn on the computer directly, and then use the driver CD to install the sound card driver. After installation, when you need to use it, after connecting to the relevant recording and playback equipment, directly right-click the small speaker in the lower right corner to select the sound card device. 5 This is the end of the independent sound card installation tutorial. The key It's a driver problem, the driver must be installed. Sound Card is also called audio card (called sound effect card in Hong Kong and Taiwan): Sound card is the most basic component of multimedia technology and is a kind of hardware that realizes the mutual conversion of sound waves/digital signals. The basic function of a sound card is to convert original sound signals from microphones, tapes, and compact discs, and output them to sound equipment such as headphones, speakers, amplifiers, and recorders, or to make musical instruments emit beautiful sounds through the Music Equipment Digital Interface (MIDI).

How to plug in the power cord when assembling a computer?

1. Take out the motherboard, remove the CPU and install it, fix the fan, plug in the memory and put it away.

2. Remove the covers on both sides of the chassis, install the power supply, and screw the motherboard tray screws in the chassis to the designated position.

3. Handle the motherboard baffle according to the interface position, snap it into the chassis back bezel, put the motherboard correctly into the chassis, and gently tighten the screws. For independent graphics, break off the small PCI-E baffle, insert the graphics card and secure it with screws.

4. Plug in the 24 4-pin power cord. If the 4-pin cord is too long, tie it into a knot.

5. Separate the front USB and audio jack cables with USB and AUDIO letters on the back from the chassis, and insert them into the USB pin slot and AUDIO pin slot of the motherboard respectively. Both are to prevent mis-insertion. The USB pin slot is usually in the lower right corner of the motherboard, and there is a USB mark under the pin slot. The AUDIO pin slot is generally located in the middle and lower left side of the motherboard.

6. Knot the switch, restart, hard disk indicator light and other wires on the chassis. Generally, this type of plug on the motherboard is adjacent to the USB. In the lower right corner of the motherboard, there are letters marking the corresponding plugs on the motherboard, such as HDLED. is the hard disk indicator light, RST is the cold start, POW-SW is the startup, SPEAKER is the alarm horn, and POW-LED is the power indicator light. Just plug them in one by one.

7. Remove the baffle at the optical drive position of the chassis (the card head can be pushed out from the back and removed). Put the optical drive in and secure it with screws.

8. Take out the optical drive and hard disk data cable. If it is a parallel port data cable, please confirm that there is an IDE interface on the motherboard. The serial port cable is generally longer. After forming a spiral shape with your fingers, you can insert it into the motherboard serial port port in sequence, and then plug in the optical drive and hard disk power cables.

9. Use tying thread to gather and fix the messy threads appropriately. Install the side covers in sequence. You're done, the next step is to partition the hard drive and build the system.

Purely personal experience, let’s discuss the shortcomings together. Reproduction is prohibited.

How to post copy to Moments when assembling a computer?

Assembling a computer is an exciting and challenging thing! From purchasing components to building the complete machine, I have a profound experience in every step: I need to learn to grasp the rhythm, learn to pay attention to details, learn to actively communicate, and finally integrate each part into a complete machine. I want to thank the computer assembly, which helped me learn how to face challenges better

How about the computer assembly at Fat Chong Digital Store?

The one I am using now was bought from Lepei on Tmall. I have been using it for three months and its performance is stable and I haven’t found any problems.

Later I compared the prices in computer stores outside, and it was still a great value for money. I felt good!

Since it is a store opened on Tmall, it is registered, and a 100,000 deposit has been paid, the quality should be trustworthy, otherwise it would have been blocked long ago.

How to restore the factory settings of an assembled computer? It is best not to mess with the host computer?

Computers do not store and restore factory settings. It’s different from a mobile phone. Because the mobile phone system is solidified, it can be restored to factory settings at any time. The computer system is installed on the hard disk, and it has been changing since the beginning of using computers. However, some manufacturers have implemented a one-click restore that can restore the factory system, similar to restoring factory settings. When assembling the machine, it depends on whether the person who installed it has set up one-click restore. If there is, use one-click restore to restore it. If not, you can only reinstall the system.

How to assemble an envivision computer?

How to install envision computer, you need to connect the monitor and then connect the power supply, then click the power button to install successfully

How to assemble snsv motherboard computer?

To assemble the SNSV motherboard computer, you need the following steps: 1. Prepare the required accessories: SNSV motherboard, CPU, memory stick, graphics card, hard disk, power supply, chassis, monitor, keyboard and mouse, etc. 2. Open the case and clean inside. Make sure the inside is clean and free of any impurities. 3. Install the SNSV motherboard into the chassis. Gently place the motherboard onto the chassis, making sure that the motherboard's input and output connectors are aligned with the panel on the rear of the chassis. Use screws to secure the motherboard to the case. 4. Install the CPU. First open the CPU socket and pay attention to the corresponding direction of the socket. Then gently insert the CPU and lock the socket. 5. Install the memory module. Select the corresponding memory slot according to the specifications of the motherboard and insert the memory module into the slot. Press gently until the buckles on both sides of the memory module slot automatically secure the memory module. 6. Install the graphics card. Insert the graphics card into the PCI-E slot of the motherboard and secure it to the chassis with screws. 7. Connect the hard drive and power supply. Connect the hard drive to the SATA slot on the motherboard and insert the power plug into the hard drive's power interface. 8. Connect the other cables and connectors. Connect the audio interface, USB interface, network interface, etc. as needed. 9. Install the power supply. Place the power supply on the power slot at the bottom of the chassis and connect the corresponding cables, such as motherboard power supply, hard drive power supply, graphics card power supply, etc. 10. Close the chassis and connect peripherals such as the monitor, keyboard, and mouse to the corresponding interfaces on the motherboard. 11. Connect the power and start the computer. Set the BIOS according to the requirements of the operating system and complete the installation of the operating system. Please note that you need to be careful when assembling your computer and make sure all accessories and connectors are connected correctly to avoid malfunctions. If you are unsure about operation, please seek professional help or refer to the relevant assembly guide.

How to restore the computer before assembly?

You can operate as follows:

1. First, click the "Start" menu in the lower left corner and select the "Settings" item.

2. In the settings bar, we can find and click to open the "Update and Security" taskbar.

3. Next, click the "Restore" option under the backup.

4. Then click the "Start" option under Reset this PC again.

5. Finally, in the pop-up dialog box, select "Keep my files" or "Delete all content". After confirmation, click the option, and the computer will begin to restore the factory settings, that is, restore it to the original one that was just installed. when.

Extended information

1. One-click recovery is used to restore the computer system. When there is a problem with the computer system, you can use it to restore your system, but the above information will be replaced by the original The backed up system files are overwritten, which has the same effect as the restore wizard, so it is also called one-click restore.

2. Consider using hardware products that can be restored immediately, such as installing a restore card or a blue core anti-virus wall. There is no need for backup and recovery processes. After a problem occurs, the recovery can be completed instantly and the system operation can be reliably protected. Keep the machine in its initial fast running state.

3. You can also try software recovery products, such as Restore Wizard, but there are many stubborn viruses that can easily destroy Restore Wizard.

How do "computer novices" assemble their own desktop computers?

1. When we want to assemble a computer of our own, we must clearly define our own usage needs: whether it is daily office work, a game enthusiast, a workstation, or a development platform. Different usage requirements will make obvious differences in the process of selecting accessories.

2. A configuration list that suits you. First, we must clarify our own usage needs, and secondly, we must give an appropriate financial budget, so that we can best meet the user's computer needs. If you don't know the basics of computer hardware, then I still don't recommend choosing accessories by yourself. There will be many problems.

3. First of all, we do not know the specific meaning of the parameters of the accessories, so we cannot fundamentally understand the basic performance of the accessories. For example, we talk about the CPU most often: what is the main frequency, turbo frequency, architecture, first-level cache, etc. These are very obscure and difficult for ordinary people to understand.

4. Secondly, although current computer interfaces basically use fool-style interfaces, this only facilitates installation and does not simplify the hardware purchase process. The numerous industrial interface standards can still make people dizzy. I once met a person who came to me with accessories to assemble a computer, only to find that the CPU slot type did not match the one on the motherboard.

5. Therefore, in the process of selecting the configuration list, we can refer to some mature configuration forms appropriately to avoid detours.

6. The installation is very simple. After confirming the configuration list, we will proceed with purchase and assembly. For some configurations, you can compare prices on multiple e-commerce platforms and choose the most reliable one to buy. However, you must not be greedy for cheap. Do not touch accessories that are far lower than the normal market price, as they usually have problems.

7. The last step is assembly. In fact, this is the simplest task. As long as you have a little bit of hands-on skills, you can complete it easily.

How to test the assembled computer?

Download the SP2004 professional copying test software. Its high-intensity load can quickly test whether there are problems with the CPU, memory, motherboard, etc. If there is no alarm after 1 hour of continuous copying, congratulations, your computer is completely faulty. Question, it is the best for stability testing of servers. It is a must-have tool for the majority of installers, counter builders, and computer buyers. The computer you assemble is stable and unstable! There are four built-in test modes, and users can choose to focus on test items as needed.

The above is the detailed content of How to install a sound card when assembling a computer?. For more information, please follow other related articles on the PHP Chinese website!