Assembling a desk seems simple, but you often encounter some difficulties, such as how to disassemble or assemble. This article will introduce you to the disassembly and assembly steps of the desk in detail and solve your troubles on this issue. Below, follow php editor Yuzai to learn more about the disassembly and assembly techniques of the office desk.
The installation method is as follows
1
Some desks are often assembled from different parts, so desks with different structures will have different sequences, but their assembly The basic structure will not change. So the first step is to look at the detailed drawings. Find out what style it is and how to install it, and have a certain pattern in mind so that installation will be easier.
2
The second step in assembling the office desk is the edge sealing of the desktop panel. Desktop panel edge banding is first based on the length of the table panel, and the length must be ensured. Then apply glue separately to fix them. And use headless or flat-head round nails to nail around the tabletop, requiring all glued surfaces and bevel joints to be tightly sealed.
3
The third step in desk assembly is to cover the wires and process the molded edges. The wiring is to saw the two ends of the four frame slats under the desktop board into 45° angles and ensure the length, and then glue the four sides under the desktop board. As for the processing of the forming edge, the profile that meets the drawing requirements will be milled on the milling machine.
4
The fourth step of office desk assembly is rest and single-piece assembly. Trimming is to use wood scrapers and sandpaper to polish the entire profile to make it meet the surface quality requirements and look more beautiful. However, the single piece is to assemble two scraps and a watch plate part into a single piece to make it more stable and beautiful.
5
The fifth step is to install the tripod. The tripod needs to be assembled with two single pieces and the other two viewing boards. After assembling the complete tripod, install it on the race horn. Finally, place the desktop board bottom up on the work surface, and use screws to connect the tripod and desktop board, so that a complete desk is successfully assembled.
The disassembly operation of the assembled desk depends on the type of desk used.
1. For a simple desk that can be folded and stowed, the disassembly method is relatively simple, just follow the reverse order.
2. For general desktops or fixed office desks that need to be assembled, the disassembly needs to be done first before proceeding with the corresponding operations. You also need to pay attention to removing the table legs, various bridges, desktops, etc. These steps require Be more cautious and careful to avoid bringing damage to your desk.
3. If it is an electric desk, the power cord, operating device, etc. need to be disassembled and processed according to the requirements in the instruction manual.
To sum up, dismantling the desk requires caution and professional skills to ensure that it is not damaged during the process of dismantling the desk.
Step 1. Panel desks are often assembled from different parts. Desks with different structures will have different sequences, but the basic structure of their assembly will not change. The first step is to look at the detailed drawings. Figure out what kind of style it is and how to install it. You should have a certain pattern in mind, so that installation will be easier.
Step 2. The second step is desktop plate edge sealing. Desktop panel edge banding is first based on the length of the table panel, and the length must be ensured. Then apply glue separately to fix them. And use headless or flat-head round nails to nail around the tabletop, requiring all glued surfaces and bevel joints to be tightly sealed.
Step 3. The third step is to cover the wire and process the forming edge. The wiring is to saw the two ends of the four frame slats under the desktop board into 45° bevel angles and ensure the length, and then glue the four sides under the desktop board. As for the processing of the forming edge, the profile that meets the drawing requirements will be milled on the milling machine.
Step 4. The fourth step is rest and assembly of the single chip. Trimming is to use wood scrapers and sandpaper to polish the entire profile to make it meet the surface quality requirements and look more beautiful. However, the single piece is to assemble two scraps and a watch plate part into a single piece to make it more stable and beautiful.
Step 5. The fifth step is to install the tripod. For the tripod, you need to assemble the two single pieces with the other two viewing boards. After assembling the complete tripod, install the race angle. Finally, place the desktop board bottom up on the work surface, and use screws to connect the tripod and desktop board, so that a complete desk is successfully assembled.
1. First disassemble the machine and check whether the accessories are complete.
2, install the bottom plate first.
3. Install drawer slides and door hinges.
4, and then connect it to the base plate.
5, then install the side shelves.
6, then combine the two together.
7, then assemble the drawer.
8, install the upper panel.
9, then put the drawer on, and you're done.
1. First disassemble the machine and check whether the accessories are complete.
2, install the bottom plate first.
3. Install drawer slides and door hinges.
4, and then connect it to the base plate.
5, then install the side shelves.
6, then combine the two together.
7, assemble the drawer again.
8, install the upper panel.
9, then put the drawer on, and you're done.
1. Some panel desks are often assembled from different parts, so desks with different structures will have different sequences, but the basic structure of their assembly will not change. So the first step is to look at the detailed drawings. Find out what style it is and how to install it, and have a certain pattern in mind so that installation will be easier.
2. The second step of office desk assembly is the edge sealing of the desktop board. Desktop panel edge sealing is first based on the length of the table panel, and the length must be guaranteed. Then apply glue separately to fix them. And use headless or flat-head round nails to nail around the tabletop, requiring all glued surfaces and bevel joints to be tightly sealed.
3. The third step in desk assembly is covering the wires and processing the molded edges.
The wiring is to saw the two ends of the four frame slats under the desktop board into 45° angles and ensure the length, and then glue the four sides under the desktop board. As for the processing of the forming edge, the profile that meets the drawing requirements will be milled on the milling machine.
4. The fourth step of office desk assembly is rest and assembly of single pieces. Trimming is to use wood scrapers and sandpaper to polish the entire profile to make it meet the surface quality requirements and look more beautiful.
However, the single piece is to assemble two scraps and a watch board part into a single piece to make it more stable and beautiful.
5. The fifth step is to install the tripod. For the tripod, you need to assemble the two single pieces with the other two viewing boards. After assembling the complete tripod, install the racing angle. Finally, place the desktop board bottom up on the work surface, and use screws to connect the tripod and desktop board. In this way, a complete desk is successfully assembled.
Desk assembly steps Desk assembly steps are as follows:
1. Some panel desks are often assembled from different parts, so desks with different structures will have different sequences. But the basic structure of its assembly will not change. So the first step is to look at the detailed drawings. Find out what style it is and how to install it, and have a certain pattern in mind so that installation will be easier.
2. The second step of office desk assembly is the edge sealing of the desktop board. Desktop panel edge banding is first based on the length of the table panel, and the length must be ensured. Then apply glue separately to fix them. And use headless or flat-head round nails to nail around the tabletop, requiring all glued surfaces and bevel joints to be tightly sealed.
3. The third step in desk assembly is covering the wires and processing the molded edges.
The wiring is to saw the two ends of the four frame slats under the desktop board into 45° angles and ensure the length, and then glue the four sides under the desktop board. As for the processing of the forming edge, the profile that meets the drawing requirements will be milled on the milling machine.
4. The fourth step of office desk assembly is rest and assembly of single pieces. Trimming is to use wood scrapers and sandpaper to polish the entire profile to make it meet the surface quality requirements and look more beautiful.
However, the single piece is to assemble two scraps and a watch plate part into a single piece to make it more stable and beautiful.
5. The fifth step is to install the tripod. For the tripod, you need to assemble the two single pieces with the other two viewing boards. After assembling the complete tripod, install the racing angle. Finally, place the desktop board bottom up on the work surface, and use screws to connect the tripod and desktop board, so that a complete desk is successfully assembled.
First lay the desk surface flat, then assemble the side panels in sequence, tighten the buckles, and then square the desk.
The steps for assembling the desk flat wind are as follows: First place the desktop on a flat surface, insert the four table legs into the mounting holes at the four corners of the desktop, and use a screwdriver to tighten the screws at the bottom.
Next insert the pull rod into the pull rod hole at the bottom of the desktop and use a screwdriver to tighten the screw at the bottom.
Then insert the support bracket at the bottom of the desktop into the support hole at the bottom of the tie rod, and use a screwdriver to tighten the screws at the bottom.
Finally insert the keyboard tray into the keyboard tray hole under the desktop, use a screwdriver to tighten the screws at the bottom to complete the assembly.
1. Some panel desks are often assembled from different parts, so desks with different structures will have different sequences, but the basic structure of their assembly will not change. So the first step is to look at the detailed drawings. Find out what style it is and how to install it, and have a certain pattern in mind so that installation will be easier.
2. Desktop panel edge sealing. Desktop panel edge banding is first based on the length of the table panel, and the length must be guaranteed. Then apply glue separately to fix them. And use headless or flat-head round nails to nail around the desktop board, requiring all glued surfaces and bevel joints to be tightly sealed.
3. Covering wires and processing forming edges. The wiring is to saw the two ends of the four frame slats under the desktop board into 45° bevel angles and ensure the length, and then glue the four sides under the desktop board. As for the processing of the forming edge, the profile that meets the drawing requirements will be milled on the milling machine.
4. Rest and assembly of single pieces. Trimming is to use wood scrapers and sandpaper to polish the entire profile to make it meet the surface quality requirements and look more beautiful. However, the single piece is to assemble two scraps and a watch plate part into a single piece to make it more stable and beautiful.
5. To install the tripod, you need to assemble the two single pieces of the tripod with the other two viewing boards. After assembling the complete tripod, install the racing angle. Finally, place the desktop board bottom up on the work surface, and use screws to connect the tripod and desktop board. In this way, a complete desk is successfully assembled. Do you feel more accomplished when using the desk you assembled yourself? Feeling.
The above is the detailed content of How to assemble a desk? How to disassemble the assembled desk?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
