Operation steps for designing mold base tiger mouth with UG8.0 software

In the UG 8.0 software, designing the mold base is a complex operation process that is often daunting. In order to solve this problem, PHP editor Zimo carefully compiled a detailed tutorial on the steps of designing the mold base with UG 8.0 software. This tutorial will guide you step by step to complete the design of the tiger's mouth mold base and solve the problems that trouble you.

The tiger's mouth plays a positioning role in the UG8.0 mold design. Generally, conventional molds require the tiger's mouth to be designed for positioning.

The tiger’s mouth on the mold core can be created using the tiger’s mouth under the Hu Bo tool, but for the tiger’s mouth on the mold base, you need to draw it manually.

As in this example, for the flat plate mold, it is necessary to design the tiger's mouth. It is obviously not very good to position the mold solely by the guide pillars of the mold frame!

After stretching the solid model of the tiger's mouth, it is necessary to perform Boolean operations and summation with the formwork.

UG8.0 To draw the mold base tiger mouth, you can first create a sketch and then stretch it. The draft angle of the tiger mouth is usually 5 degrees or 10 degrees, and the R angle needs to be chamfered in the middle.

The height of the mold core's tiger's mouth is higher than that of the mold core, which can be 8mm or 10mm; the tiger's mouth is often designed on the rear mold.

After the detailed design of the tiger's mouth is completed, it is necessary to perform a Boolean operation with the A board to find the difference. There should be a 0.5mm space between the tiger's mouth and the A board. More Regarding the UG8.0 mold design training tiger mouth design, please download the video to learn.

The above is the detailed content of Operation steps for designing mold base tiger mouth with UG8.0 software. For more information, please follow other related articles on the PHP Chinese website!