Where to set the taper of the 3d model in PS2021_How to set the taper of the 3d model in PS2021

When using PS2021 to process 3D models, you may encounter the need to set the taper. PS2021 provides powerful features that allow you to easily adjust the taper of your model. This article will show how to use PS2021 to set the taper of a 3D model. Read on to learn detailed steps and tips to make your models more realistic and refined.

First enter a 3D workspace and create a digital 3D model. By default, the 3D model has a projection.

Then remove the check mark before the projection option to remove the projection of the 3D model.

Then click the transformation option pointed by the arrow in the properties panel. Be sure to select the layer where the text is located during this operation.

There is a taper option in the panel, and the initial value is 100%.

If you want to get an awl shape that converges towards the middle, you only need to reduce the taper.

The picture below is the graphic effect after processing. Increasing taper creates a fan effect.

The above is the detailed content of Where to set the taper of the 3d model in PS2021_How to set the taper of the 3d model in PS2021. For more information, please follow other related articles on the PHP Chinese website!