Many users need to enter the BIOS interface for settings when installing and assembling their computers, but they don't know how to enter. PHP editor Apple will bring you two small methods today to teach you how to easily skip the BIOS and quickly enter the system, and how to enter the BIOS for settings. If you also want to quickly learn about this knowledge, then continue reading!
You can skip it by pressing the F1 key when you start the computer. The cause of this fault is improper BIOS settings, but the system can boot normally. It is a non-fatal fault. Pressing F1 will ask you whether to continue. It can be divided into the following situations:
1. There is actually no floppy drive or the floppy drive is broken, but there is a floppy drive set in the BIOS, which results in the need to press F1 to continue.
2. Originally, two hard disks were attached and were set to dual hard disks in the BIOS. Later, when one of them was removed, but one forgot to change the BIOS settings back, this problem would also occur.
3. If the motherboard battery is out of power, it will also cause data loss and this fault will occur.
4. Restart the system, enter the BIOS settings, and find that the floppy drive is set to 1.44M, but there is actually no floppy drive in the chassis. After setting this item to None, the fault is eliminated.
Before entering the BIOS, you need to make sure that the computer is completely shut down and powered off. Here are several common ways to enter the BIOS:
1. Use shortcut keys: Most computer manufacturers will display a prompt message at startup telling you which key to press to enter the BIOS settings. Usually the F2, F10, F12 or Delete key. After pressing the appropriate keys, you should be able to see a screen with information about your computer's hardware and BIOS settings.
2. Use the button on the motherboard: Some computer motherboards have a dedicated button for entering BIOS settings. This button is usually labeled "BIOS" or "UEFI". After pressing the button, you should be able to see a screen with information about your computer's hardware and BIOS settings.
3. Through Windows system: If your computer is equipped with Windows operating system, you can also open the Run dialog box by pressing the Windows key R, then enter the "msconfig" command and press the Enter key. In the System Configuration window, select the Boot tab and click Advanced Options. Here you can select the operating system to boot and the associated drivers and settings. If you need to enter the BIOS settings, click the "Edit" button and select the appropriate options.
Please note that different computer brands and models may have different methods of entering BIOS setup. Therefore, it is recommended that you check your computer user manual or online documentation for more detailed guidance.
To enter the BIOS, you need to press specific keys when turning on the computer, usually during the computer's power-on self-test (POST) process. Different computer manufacturers, computer brands and BIOS types may be different, but the following is the method that can be used in general:
1. Turn on the computer. When you see the computer startup logo, press immediately Press F2, F12, Delete, Esc and other keys.
2. If you are not sure which key is pressed, please check which key your computer starts sending messages continuously. For example, some computers continuously output "Press F2 to enter Setup" starting from the F2 key.
3. If you miss the startup logo, please restart your computer and try again.
4. If you don’t know what to do after entering the BIOS, please read the information displayed on the screen carefully, especially the key parts with red blocks. They will generally tell you how to change settings, save and exit. BIOS or other related prompts.
Please note that making any changes in the BIOS carries certain risks. If you are not sure how to operate, please consult a professional or refer to the relevant guide.
In bios, just set the hard disk as the first startup item.
1. First, find the Security menu in the BIOS interface. The Secure Boot menu is selected by default.
2. Select "Secure Boot menu" and press Enter. The current option is set to "disabled".
3. Then press ESC on the keyboard to switch to the "Boot" menu.
4. On the "Boot" option page, set Launch CSM to Enabled.
5. After setting the above two steps, press F10 to save and exit, then restart the windows system, and you will no longer automatically enter the bios page.
How to skip BIOS and start directly when booting:
1. First find the Security menu in the BIOS interface. The Secure Boot menu is selected by default.
2. Select "Secure Boot menu" and press Enter. The current option is set to "disabled".
3. Then press ESC on the keyboard to switch to the "Boot" menu.
4. On the "Boot" option page, set Launch CSM to Enabled.
5. After setting the above two steps, press F10 to save and exit, then restart the windows system, and you will no longer automatically enter the bios page.
Generally speaking, when this prompt appears when you turn on the computer, it is because the machine found an error during the power-on self-test and asked you to enter the BIOS to modify it. Enter the BIOS, select "load optimal defaults", optimize the BIOS, check the time and date of your BIOS, save and exit. PS: It may also be because your motherboard battery is out of power and cannot save the BIOS setting information, so this prompt will appear when you turn on the computer.
The computer starts up the bios self-test, which is the basic function and basic requirement of the computer motherboard. If you skip the bios self-test, there will be certain hidden dangers, as follows
The first is because you have to be prompted every time you turn on the computer
The second is because, usually, the disk has It will only prompt when there may be errors. It is best to let the system scan and fix the errors to avoid losing data in the future.
Press the Del key to enter the BIOS setup main interface after booting, select the Advanced BIOS Features setting item, enter and set the Boot Up Floppy Seek to Disabled. Then press F10 to save the settings, press Y, and press Enter to exit the BIOS.
Set it to silent in the startup settings;
In addition, if you want not to display the startup screen, press the TAB key.
The method to skip the BIOS self-test is as follows
1. Press the delete key to enter the BIOS after booting, enter the Advanced Setup Page, find the Quick Boot item, and set it to Enabled. It will jump Passed self-test.
2. Click "Start → Run", enter "regedit" in the "Run" dialog box to open the registry editor, and select "HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Control\\SessionManager" in sequence subkey, then find the "BootExecute" key value item in the right window and clear its value, and finally press the "F5" key to refresh the registry.
The above is the detailed content of How to skip bios when booting the computer? How to enter bios after assembling a computer?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
