How to replace the memory stick of desktop computer

How to change the 4G desktop computer to 8G

If the computer prompts that it only supports a maximum of 4GB memory, but you want to install 8GB memory, you need to confirm your computer first Does the motherboard support 8GB memory? If the motherboard supports 8GB of memory, it can be added to the computer. However, before installing 8GB of memory, you need to check whether the operating system supports 8GB of memory.

Win7 64-bit system has 8g of memory installed, but only 4G is displayed: This type of failure is because the system defaults to the maximum number of memory.

Yes, most computers have two or more memory slots, so you can add memory modules. You can use Master Lu to test whether your 4G memory stick is one or two 2G memory sticks. If there is a reserved slot, buy another 4G memory stick and plug it in.

This depends on whether your host still has a slot. If there is one, you can buy a 4G one. If not, you need to directly replace the 4G one with an 8G one.

OK. Your motherboard is Jieling h55p55, which supports 8g memory and independent graphics card. If you want to upgrade, you can upgrade the memory to 8g and use a second-hand gtx750 ti as the graphics card. The picture below shows the hardware specifications supported by the motherboard. It can be seen that your motherboard supports 8g memory and independent graphics.

Check the memory slot support of the motherboard. If the memory slot is enough, insert a 4G one. If not, replace it with an 8G memory stick and replace the 4G one.

How to replace the computer memory module

The method of disassembling and installing the computer memory module is as follows: Pull out the computer main case and observe that there are simple screws on the back of the case. There are 2 in total on the top and bottom. We put Unscrew it. After unscrewing the screws, hold down the chassis cover and push it to the left, and the main chassis cover will be removed.

The collective operation is as follows: Press "Win+R" on the desktop to open the run window. Enter "dxdiag" and click "OK". You can see the computer memory in the pop-up page. Use relevant software to check the original notebook memory model. Different models of notebook memory cannot be mixed.

To replace the memory, you first need to determine the type and number of memory slots in your computer. Desktop computers mostly have two or four slots, while laptops usually have only one or two slots. You need to open the memory slot on your computer's motherboard, insert the memory module securely into the slot and push it into place.

, separate the buckles on both sides outward; 2. Pull out the memory module upwards. When disassembling and assembling, be careful not to damage the electronic components and solder joints on the memory module.

Use a screwdriver to remove the back cover of the computer and ensure that the computer memory slot model is consistent with the memory module model.

It is best to buy the same model of memory, such as the same brand and model, and the size can be arbitrary (of course you can change it to a larger one). Preparations before installation: Power off the computer, open the case, and use a brush to clean the dust accumulated in the memory slot. It is best to have a "skin tiger" blow it.

How to replace the memory stick in a computer

Pull out the computer main case and observe that there are simple screws on the back of the case. There are 2 in total on the top and bottom. We will unscrew them. After unscrewing the screws, hold down the chassis cover and push it to the left, and the main chassis cover will be removed.

Use a screwdriver to remove the back cover of the computer and ensure that the computer memory slot model is consistent with the memory module model.

, separate the buckles on both sides outward; 2. Pull out the memory module upwards. When disassembling and assembling, be careful not to damage the electronic components and solder joints on the memory module.

To replace the memory, you first need to determine the type and number of memory slots in your computer. Desktop computers mostly have two or four slots, while laptops usually have only one or two slots. You need to open the memory slot on your computer's motherboard, insert the memory module securely into the slot and push it into place.

The above is the detailed content of How to replace the memory stick of desktop computer. For more information, please follow other related articles on the PHP Chinese website!