There is only one memory stick in which slot?

Where should the memory stick be inserted in a newly assembled computer?

1. The computer memory stick is generally installed in the memory slot of the computer motherboard. The location is: Usage Tips: If the memory exceeds 4G, it is generally necessary to change to a 64-bit system. The 32-bit system supports a maximum use of 4G memory. If the memory exceeds 4G, it will be wasted.

2. The computer memory module is on the motherboard. For desktop computers, the memory module is placed vertically to the motherboard. Each laptop model is different, and the location of the memory is also different. Laptop memory modules are basically placed at the bottom of the laptop or under the keyboard.

3. The memory module of the computer host is next to the CPU. It is the longest slot on the motherboard. There are two slots or four slots. You can use either one. When unplugging the memory module, be sure to open the white buckles at both ends first, and then you can easily unplug it.

4. Open the back cover of the computer. In the upper left corner of the T-shaped area is the place to add the memory module. Insert the memory stick: First determine the front and back sides. There is a small opening (notch) on the memory stick. Just line up this little opening with the bump on the memory module socket. After the small opening is aligned with the protrusion, the memory module can be inserted.

5. As shown in the red box in the figure below, it is the location of the memory card slot in the chassis.

There are 4 memory slots and 1 memory stick. Which slot is better? The one close to the CPU or the one far away from the CPU_Baidu Zhi...

It is best for the memory to be farther away from the CPU. The reasons are as follows: 1: Avoid weak electromagnetic interference between the two. 2: This is the most important point, good heat dissipation. You must know that problems can easily occur when the memory is hot. Especially DDR3 memory has high operating frequency and high heat generation.

There is no hard requirement for this, but it is recommended to insert it into a slot closer to the CPU. For most computers, this usually has no impact. The computer can work regardless of which slot it is plugged into, and there is no difference in performance.

You can plug it into any slot, but the one closest to the CPU in order is slot 1.

There is only one memory stick. Is it better to insert it into the slot closer to the CPU or farther away?

1. Hello: 1. It is best to insert a memory stick into the slot. 2. Usually the first slot is the slot.

2. There is no hard requirement for this, but it is recommended to insert it into a slot closer to the CPU. For most computers, this usually has no impact. The computer can work regardless of which slot it is plugged into, and there is no difference in performance.

3. It basically has no effect, but it is still recommended that you plug it into the first slot closest to the CPU. As for the reason, it is easier to generate dust close to the CPU. It is better to clean the memory module than to clean the memory slot. It's easier. And when you add another strip later, you can plug it into another slot.

4. This memory slot is not inserted randomly, it is usually in 1, 3 or 2, 4 mode. If you have a single memory stick, it doesn't matter, but if you have two memory sticks, you need to insert them into slots 1, 3, or 2, 4. This can achieve dual channels, and when using the memory, it can be faster. .

5. Generally, the memory slot is very close to the CPU. If it is a single memory, it can be inserted into a slot slightly farther from the CPU, which is beneficial to heat dissipation. This seems to be the only benefit, haha. Hope it helps.

The above is the detailed content of There is only one memory stick in which slot?. For more information, please follow other related articles on the PHP Chinese website!