What should I do if the recovery interface appears when the computer is turned on?-Hardware News-php.cn

What should I do if the recovery interface appears when the computer is turned on?

What to do if the system recovery interface appears when the computer is turned on

1. Do not force a shutdown when the computer is shut down. First, click the start button of the computer, and then select Computer power button, and then select the power button. Forced shutdown will cause the computer system to malfunction. Before using the computer every day, do a good job of cleaning and disinfecting the computer.

2. First, when turning on the computer, the system prompts: press esc for recovery menu. According to the prompt, press the "ESC" button. Then in the pop-up interface, press the "F5" button and press Enter to confirm. This will solve the problem and enter the computer desktop normally.

3. Modify settings during operation. Method 1: Start - run msconfig, open the system configuration window, click Boot, click: Windows7 - Set as default, then click: Apply - OK, restart the computer.

4. The win10 operating system is installed, but cannot be turned on, and this page appears. According to the prompt below, pressing F8 does not work at all. You can only "press esc to specify UEFI firmware settings". Press esc on the keyboard to enter the motherboard settings. Click "Bootmenu (F8)". The interface appears.

5. Steps: 1. Enter safe mode and remove the recently installed driver software. ① Boot to WinRE (Windows Recovery Environment), which can be understood as recovery mode.

6. The only thing that computer users need to do is to wait patiently for it to complete. It will automatically restart after completion. If you cannot enter the system after restarting, you need to reinstall the system.

What should I do if the recovery interface appears when the computer starts up?

If this screen appears frequently, the hard disk may have more fragments or bad sectors. You need to use the system U disk or CD to start the computer and then use DISKGEN Wait for special tools to detect and repair the hard drive. If the repair doesn't work, the hard drive will need to be replaced.

Be sure not to force shutdown when the computer is shut down. First click the start button of the computer, then select the power button of the computer, and then select the shutdown button. Forced shutdown will cause the computer system to malfunction. Before using the computer every day, do a good job of cleaning and disinfecting the computer.

First of all, when you turn on the computer, the system prompts: press esc for recovery menu. According to the prompt, press the "ESC" button. Then in the pop-up interface, press the "F5" button, and then press Enter to confirm. You can solve the problem and enter the computer desktop normally.

What to do if the "System Recovery Options" is displayed when the computer is turned on

1. It may be a virus that causes the system to malfunction. Use anti-virus software for detection and anti-virus. Because the installed software or plug-in is not compatible with the system, a conflict occurs. Just delete the conflicting software.

3. It should be caused by deletion of some system files of the computer, or abnormal shutdown. You can use the installation disk to repair it. Put the CD in when starting up, and then select startup repair.

4. Processing: The only thing that computer users need to do is to wait patiently for it to complete. It will automatically restart after completion. If you cannot enter the system after restarting, you need to reinstall the system.

5. Restart the computer, then press the F8 key during startup to enter the menu. Select options in the boot menu and click to enter. Click on the dialog box that opens.

6. Restart. Press and hold the F8 key. When the boot menu appears, select Last Correct Settings and press Enter to see. If it doesn't work, you can restart again, select safe mode, press Enter, wait a while, go in to anti-virus, scan with 360 Security Guard, and then restart. If there is still a problem, it is a system problem and reinstall the system.

How to solve the problem of the recovery interface when the computer is turned on

Be sure not to force a shutdown when the computer is shut down. First, click the start button of the computer, then select the power button of the computer, and then select the shutdown button. Forced shutdown will cause the computer system to malfunction. Before using the computer every day, do a good job of cleaning and disinfecting the computer.

First of all, when turning on the computer, the system prompts: press esc for recovery menu. According to the prompt, press the "ESC" button. Then in the pop-up interface, press the "F5" button, and then press Enter to confirm. You can solve the problem and enter the computer desktop normally.

Windows error recovery occurs when the computer starts, which is caused by setting errors. The solution is as follows: restart the computer, and then press the F8 key during startup to enter the menu. Select options in the boot menu and click to enter.

Solution Step 1: Determine under what circumstances this error occurs If this error occurs when setting up a new computer, or after restoring the computer, select Turn on Startup Repair from the error screen (Recommended) ” and let Windows repair its files. If the error persists after repairing it, perform a system recovery to restore the computer to its original configuration.

安装了win10操作系统，无法开机，出现这页面。根据版下面提示，按F8根本没有有，只能“按esc以指定UEFI固件设置”。按键盘上的esc进入主板设置。点击“Bootmenu（F8）”。出现界面。

开机显示恢复怎么办

1、可能是中病毒导致系统出故障。用杀毒软件进行检测与杀毒。因为安装的软件或者插件跟系统兼容性不行，发生冲突。将冲突的软件删除即可。

2、首先检查电脑的外部接线是否接好，把各个连线重新插一遍，看故障是否排除。

3、可以长按开机键直到机器断电，然后再开机，再断电，重复3-5次，直到进入如下图的恢复模式。② 从选择选项屏幕中，请点击或单击疑难解

4、解决方法第1 步：确定在何种情况下出现该错误如果在设置新电脑时，或者在恢复电脑之后出现该错误，请从错误屏幕中选择“打开启动修复(推荐)”，让 Windows 修复其文件。如果修复之后仍然出现错误，请执行系统恢复，将电脑恢复到初始配置。

5、原因可能是电脑在上次使用了强制关机，可以通过电脑自动修复进入系统的方法来解决。在电脑关机时一定不要强制性关机，首先要点击电脑的开始键，然后选择电脑的电源键，然后选择关机键。强制关机会造成电脑系统出现故障。

电脑屏幕显示恢复:你的电脑设备需要修复怎么办

1、首先检查电脑的外部接线是否接好，把各个连线重新插一遍，看故障是否排除。

2、尝试使用Windows自带的修复功能：在Windows10的安装界面中选择“高级选项”，然后选择“故障排除”“高级选项”“自动修复”。系统会尝试自动修复任何文件系统错误或启动错误。

3、处理方法：用u盘启动，进入系统后，找到系统所在盘（通常在C盘），找到对应的文件，将其删除，删除后重启，等待启动，问题就会解决的。这是提示你电脑在某一方面出现了故障，需要进行修复，需要进行处理。

4、根据提示按下“ESC”按键；进入固件设置界面；移动点击固件设置界面的“Boot Menu”选项或者按快捷键“F8”；在“Boot Menu”设置菜单中选择“P2：ST1000D...”选项；重启开机，即可解决这一问题。

5、首先打开电脑，此时会弹出需要修复的界面。重启电脑，然后在电脑开机图标出现后按f2进入bios（台式机按del键进入bios）。通过键盘上的左右键向右移动，找到“Security”导航夹内中 Secure Boot 选项。

The above is the detailed content of What should I do if the recovery interface appears when the computer is turned on?. For more information, please follow other related articles on the PHP Chinese website!