Memory module black screen

The computer goes black after installing the memory module

This situation may be a problem with the memory module, or it may be a problem with other hardware. You can try the following troubleshooting first: Install only the Lenovo 8GB memory stick and use it for a period of time to see if the black screen problem still occurs.

First of all, it may be that the model of the memory slot in the computer host does not match the model of the memory, resulting in a black screen at startup. After installation, it is also possible that the memory module added later is incompatible with the motherboard, which will also cause such problems.

Poor contact of the memory module will cause the computer to fail to boot normally. Disassemble and reinstall. The specific operations are as follows: First, determine whether the model of the memory slot in the computer host matches the model of the memory. If you don’t know the model number, just look at the location of the slots and memory gaps.

Your situation may be caused by the fact that you did not insert the new memory stick tightly when you inserted it. When you inserted the memory stick into the slot at an angle, press it in hard, and then press it down again and it will get stuck. . You should have no compression issues.

The computer has a black screen after a new memory module is turned on

The monitor is damaged: Repair or replace the monitor. The memory module is incompatible with the motherboard: Replace it with a memory module with the same specifications as the one used before. The memory module was not installed successfully: Install the memory module correctly in the card slot.

First of all, it may be that the model of the memory slot in the computer host does not match the model of the memory, resulting in a black screen at startup. After installation, it is also possible that the memory module added later is incompatible with the motherboard, which will also cause such problems.

Poor contact of the memory module will cause the computer to fail to boot normally. Disassemble and reinstall. The specific operations are as follows: First, determine whether the model of the memory slot in the computer host matches the model of the memory. If you don’t know the model number, just look at the location of the slots and memory gaps.

Your situation may be caused by the fact that you did not insert the new memory stick tightly when you inserted it. When you inserted the memory stick into the slot at an angle, press it in hard, and then press it down again and it will get stuck. . You should have no compression issues.

You can use an eraser to wipe the golden finger of the memory stick to remove the oxygen layer of the memory stick, and then insert the memory stick into the memory slot. Maybe the memory sticks are not of the same brand or are of different generations or frequencies and are not compatible, causing a black screen at startup.

The computer moved the memory module, and then the screen turned black after booting up

Poor contact of the memory module will cause the computer to fail to boot normally. Disassemble and reinstall. The specific operations are as follows: First, determine the computer host. Check whether the model of the memory slot matches the model of the memory. If you don’t know the model number, just look at the location of the slots and memory gaps.

It means that the capacity of your memory module is too large, or the memory module is not inserted properly.

First of all, it may be that the model of the memory slot in the computer host does not match the model of the memory, resulting in a black screen at startup. After installation, it is also possible that the memory module added later is incompatible with the motherboard, which will also cause such problems.

Poor quality or damage to computer accessories is the main cause of black screen failure on the monitor. For example, problems with the motherboard (and motherboard's CMOS), memory, graphics card, etc. may definitely cause a black screen failure.

This situation usually occurs due to the computer memory module, graphics card or system black screen. Solution: Unplug the memory stick and check it, then wipe it with an eraser; if it is a graphics card problem, you need to reinstall the graphics card driver; if there is a problem with the computer system, you can only reinstall the system.

Asus Flying Fortress 7 plus memory module black screen

1. It is recommended that you change the memory slot and try to see if it can be used. You can also try using the memory that comes with the original machine alone to see if it works. In this case, if so, it may be that the memory you installed has a compatibility issue, or there may be a problem with the memory itself. It is recommended that you contact your memory dealer for communication.

2. Your situation may be caused by the fact that you did not insert the new memory stick tightly when inserting it. When you insert the memory stick into the slot at an angle, press it in hard, and then press it down again. stuck. You should have no compression issues.

3. Check whether the memory is inserted properly. Generally, the alarm will sound if it is not plugged in properly, but sometimes the alarm will not sound or the buzzer is broken and the alarm cannot be heard. Carefully reinsert it. If it still doesn't work, it may be that the memory module is of poor quality. If the memory is new, just replace it directly. If the memory is old, use an eraser to wipe the golden finger of the memory.

The above is the detailed content of Memory module black screen. For more information, please follow other related articles on the PHP Chinese website!