What should I do if my laptop turns on and the screen goes black and only the mouse is visible?

Why does the MSI laptop have a black screen when it starts up, and only the mouse can be seen?

Because most black screens are basically caused by a certain service in Windows, just restart the computer. Solved the problem of black screen with only mouse pointer. Method 2: Turn on the computer, long press "shift", select safe mode in the menu, log in normally and open it, then restart the computer, and that's basically it.

A black screen may occur when the computer starts up because the motherboard, monitor and graphics card in the computer are damaged, or the computer configuration is too old. Most of the reasons are caused by process errors. You can follow the steps below to troubleshoot.

When we see that there is only a mouse on the desktop, we can assume that Explorer is not open. If the screen is completely black, it is caused by a software or hardware failure. First, Ctrl+Alt+Delete keys to open the Task Manager window, as shown below. There is a new task in the lower right corner, click on it.

It may be a conflict between the system and the software, or there may be a conflict between the software and the software, causing errors when the system runs certain service programs. It is also difficult to detect the root cause of the fault. Even if you use Conventional repair methods may not fundamentally solve the problem.

% of black screens are caused by improper operation of the computer. Stuck is the root cause of black screens. If you don't do the operation that easily causes the stutter, you will avoid black screens or reduce the occurrence of black screens.

Hello, you can enter the safe mode of your computer. If you enter normally and the screen is black and only the mouse is visible, it means that you have installed the appropriate software, drivers, etc. before the accident. Uninstall the things installed before the accident in safe mode. If you don’t know or If it doesn't work, it is recommended to restore the system or reinstall it.

Why is the computer screen black and only the mouse visible?

1. ② When the computer is turned on, the screen is black but the mouse lights up. It may be that the graphics card, display cable, or monitor are faulty.

2. Because most black screens are basically caused by a certain service in Windows, restarting the computer can solve the problem of a black screen with only a mouse pointer. Method 2: Turn on the computer, long press "shift", select safe mode in the menu, log in normally and open it, then restart the computer, and that's basically it.

3. If it doesn't work, it may be caused by a problem with the system or driver software. Try backing up the data and then restoring or reinstalling the system to solve the problem.

What to do if the computer turns on and the screen goes black and the mouse appears

1. j. Check the parameter settings. Check whether the CMOS parameter settings are correct. If improper CMOS parameter settings cause a black screen and the computer does not start, you must open the case and restore the CMOS default settings. k. Check whether a virus causes a black screen on the monitor.

2. Restart the computer: Press and hold the power button for a few seconds to force shut down the computer, and then start it again. Sometimes this simple reboot can solve a temporary problem. Check your monitor connections: Make sure your monitor is properly connected to your computer's video output port (usually VGA, DVI, HDMI, or DisplayPort).

3. Because most black screens are basically caused by a certain service in Windows, restarting the computer can solve the problem of a black screen with only a mouse pointer. Method 2: Turn on the computer, long press "shift", select safe mode in the menu, log in normally and open it, then restart the computer, and that's basically it.

4. What to do if the computer starts up with a black screen and a mouse. Method 1: Restart the computer, press F8, enter the startup menu, and select "Use last known good configuration" to start the computer.

What to do if the computer desktop has a black screen with only the mouse cursor

This problem can be solved by starting the resource manager. The specific steps are as follows: After the computer is turned on, a black screen is found with only the mouse arrow. Directly use the shortcut keys Ctrl+Alt+Delete to open the icon window and select Task Manager to enter.

Press the "ctrl+shlft+exc" keys at the same time to bring up the task manager. Click "Details" in the lower left corner of Task Manager. Then click "Run New Task" in "File" in the upper left corner. A new window will pop up, enter "explorer.exe", and then click "OK".

The first thing may be the hardware problem. The hardware itself has too many bad sectors, so only the mouse can display. In this case, you can use a USB flash drive to test the hard drive. If there are too many bad sectors, the only way is to replace the hard drive. Furthermore, it may be that the C drive memory is full.

When we see that there is only a mouse on the desktop, we can assume that Explorer is not open. If the screen is completely black, it is caused by a software or hardware failure. First, Ctrl+Alt+Delete keys to open the Task Manager window, as shown below. There is a new task in the lower right corner, click on it.

What should I do if my laptop starts up with a black screen and only the mouse?

1. If the above method does not solve the problem, download "Driver Life" and upgrade: graphics card driver! Turn on the computer again. If it still doesn't work, you need to "one-click restore" or "reinstall the system". Before reinstalling the system, you need to back up important data to avoid losing it.

2. Press and hold the power button to force shutdown and restart the computer after a few minutes; you can try clicking F8 (win8 system: SHIFT+F8) when booting to select safe mode to see if you can enter and perform a full disk Check for viruses and uninstall the current graphics card driver. After restarting, reinstall the driver test from the official website.

3. What should I do if my laptop has a black screen and only the mouse can move? You can try restarting. Most problems can be solved by restarting. You can try to keep pressing the F8 key. If the interface shown below appears, it can start normally. If that still doesn't work, keep pressing the power button to force a shutdown and try turning it on again after a while.

The above is the detailed content of What should I do if my laptop turns on and the screen goes black and only the mouse is visible?. For more information, please follow other related articles on the PHP Chinese website!