Graphics card front panel vertical installation design, Lian Li releases Sa 01 (SUP-01) chassis

According to news from this site on May 30, Lian Li officially launched the Sa 01 (SUP-01) side-transparent chassis today. A major feature of this chassis is that it supports vertical installation of the graphics card on the front panel.

Sa 01 chassis has a volume of about 45L and an area of ​​403.45*212 (mm). It is smaller than the traditional tower chassis and supports up to ATX standards. The motherboard also supports ATX back-plug motherboard.

This case is compatible with CPU coolers up to 88.2mm tall (suitable for CPU water cooling) and power supplies up to 220mm long.

Sa 01 chassis can install a 4 slot thick 400mm long graphics card on the front panel via the included PCIe Gen4 extension cable; of course, half-height add-on cards can also be installed in the usual location.

Sa01 chassis is pre-installed with three 120mm fans on the back side of the motherboard and close to the graphics card installation position on the front panel, which can improve the cooling effect of the graphics card. .

The fan parameters equipped by Lian Li for this chassis are as follows: rotation speed range 300~1800RPM, maximum static pressure 2.56mmH2O, maximum air volume 68.88 CFM.

On the back side of the motherboard, the Sa 01 chassis

has a 360/280 fan position for CPU cooling.

In terms of storage, the power supply compartment of the Sa 01 chassis contains a two-in-one bracket that supports 2.5/3.5-inch hard drives. In addition, there are two 2.5-inch ones above the power supply compartment. Hard disk space.

For the last two hard disk slots, Lian Li also provides mirror masks, which can improve the internal aesthetics of the chassis.

Lian Li is equipped with LED light strips on the lower part of the chassis shell and the side of the PCIe extension cable, supporting 6 preset RGB lighting modes.

In terms of the IO design of the chassis, Lian Li cleverly used the "LIAN LI" trademark on the

front as the power-on and restart button.

The main interface of the Sa 01 chassis is on the left side, including 1 USB Type-C 10Gbps interface, 2 USB Type-A 5Gbps interfaces and a 2-in-1 audio jack.

The official introduction video of the affiliated force on this site is as follows:

The above is the detailed content of Graphics card front panel vertical installation design, Lian Li releases Sa 01 (SUP-01) chassis. For more information, please follow other related articles on the PHP Chinese website!