Detailed method of T-shaped knife design in UG8.0 software

There is a certain degree of difficulty in T-shaped knife design in UG8.0 software, and many factors need to be considered in practical applications. PHP editor Strawberry will introduce the design method of T-shaped knife in detail, including specific steps and precautions. Through this article, everyone can understand the techniques of T-shaped knife design in UG8.0 software, thereby improving design efficiency and product quality.

First create a T-shaped tool in the processing module. Click on the new tool, T-shaped knife, as shown below.

Set the tool parameters and enter the actual machining tool size. For example, if the groove depth is 10mm, enter 10

in the blade length to create a process. In the Create Process dialog box, select the process subtype: reciprocating roughing

Set the component boundary and bottom surface, and use the cutting mode of contour processing.

After confirming the tool path, the overcut check is completed if there are no problems.

The above is the detailed content of Detailed method of T-shaped knife design in UG8.0 software. For more information, please follow other related articles on the PHP Chinese website!