When using Windows 7, you may encounter a situation where two computers cannot share, making it difficult to transfer files between devices. To solve this problem, PHP editor Shinichi provides a comprehensive guide on how to solve Windows 7 sharing issues. It contains clear and easy-to-understand instructions covering various causes and solutions to help you easily re-establish a shared connection between two computers.
You can follow the following steps: 1. Connect the two computers with a cross-over network cable; 2. Check whether the workgroup names of the two computers are the same. If they are different, change them to The same name; 3. Specify IPs for the two computers respectively, and the specified IPs must be on the same network segment. For example, one is 192.168.1.10 and the other is 192.168.1.20. The subnet masks are both 255.255.255.0. The gateway is 192.168.1.1 and the DNS is 192.168.1.1. 4. Second, enable the "Guest" account on each computer. Right-click "Computer" on the desktop - "Management", select "Local Users and Groups - Users", right-click "Guest" in the right pane, select "Properties", and cancel " Account has been deactivated". Then → Start → Settings → Control Panel → Administrative Tools → Local Security Policy → Local Policy → User Rights Assignment → Take a look → Access this computer from the network → Add the GUEST user if there is one, it is not needed → Then look again → Deny access from the network This computer → Remove GUEST. If there is no GUEST, there is no need to set it up. 5. Open "Local Area Connection" and confirm that the Internet Connection Firewall is not enabled in the "Advanced" tab of the "Local Area Connection" properties. Right-click "Computer" on the Windows desktop, select "Properties", then click "Advanced System Settings" - "Computer Name", select "Change", and change the workgroup to "work". (The above operations are required on both computers) 6. Share the folder that needs to be moved: Right-click the folder that needs to be shared, select Properties, select "Sharing", then click "Advanced Sharing" below, and select in the pop-up window Share this folder and set read and write permissions accordingly. 7. In "Start" - "Run", enter "\IP address of the shared folder" (you can also enter it in the address bar of my computer), such as: \192.168.1.10 (or 192.168.1.20) and press Enter ( or OK) to enter the sharing interface of the other computer. 8. Find the shared folder and double-click to enter the folder to read the files in the file. 9. To facilitate next access, you can map the network drive or create a shortcut to your local computer. Right-click the folder and select Map Network Drive or Create Shortcut.
Computer network sharing problem WINDOWS Shared computers must be set up)
1. Open a GUEST account (Control Panel → User Account → Enable guest account GUEST)
2. Set up in the same workgroup (right-click My Computer → Properties → Computer Name → Change →Workgroup (requires restart))
3. Install the network "service" protocol (Control Panel → Network Connection → Right-click "Local Area Connection" → Properties → General → Click "Install" → Service directly)
4. Run it once "Set up home and small office networks" (Control Panel → Network Setup Wizard; or Network Places → Set up home and small office networks) - Enable shared files
5. Share the files or folders you want to share (right-click the file you want to share folder, select "Sharing and Security" → check "Share this folder on the network"; or copy the file to be shared to the shared document)
6. Share the printer (right-click the printer to be shared, select "Share" → check "Share this printer") After connecting, enter his IP in the address bar to access his shared (that is, the IP in the local connection properties). When setting the IP in the local connection properties, the final It's better to set it manually, not to get it automatically. Click on Network Neighborhood - View Workgroup Computers and you can see it. Detailed explanation of network sharing settings between XP and Vista.
1. Enter the Control Panel Home Group page
Open the Control Panel and find the Home Group and Sharing options under Network and Internet and open
2. Enter Change Advanced Sharing Settings
After opening, select the Change Advanced Sharing Settings function to enter
3. Turn on file and printer sharing
Turn on file and printer sharing, and select the sharing condition settings. After saving, we can start sharing .
Method/steps
First of all, I would like to state that this method has only been tried between two WIN7 computers, and has not been tried with other combinations.
First make sure that a computer can be connected to the printer normally and can print (as shown in the picture, the printer connected by the editor is KONICA MINOLTA 266 XPS).
Turn off the local firewall: Start->Control Panel->Control Panel->System and Security->Windows Firewall->Turn Windows Firewall on or off, and turn off both the home or work network and the public network.
Share the local printer: Start->Devices and Printers->Find the printer that the machine can print normally->Properties->Sharing->Check both items (for easy identification, I changed the printer name suffix to 1178) .
Set the machine name and login password:
1. Set password: Start-"Control Panel-"User Accounts and Family Security-"User Account-"Set Password (the editor has already set it here)
2. Set the name of the local computer: The editor sets the name of the local computer to xiyond
View the local area network: Open the Network and Sharing Center and check the network (this is my work network).
Set up another computer network: First make sure the two computers are on the same LAN and check the network connection. As shown in the picture, the editor's two computers are connected to a WIFI called "DZB".
Turn off the firewall on another computer. The method is the same as above and I won’t go into details here.
Set up another computer network (make sure the two computers are on the same network). As you can see here, both computers are on the working network. If they are different, you can click to select.
Click in to view my previous machine through the workgroup. Click on the machine name to enter. Enter the user name and password of the machine to enter. You will see the printer with the name suffix 1178.
Add printer: Start-"Devices and Printers-"Add Printer-"Add Network, Wireless Printer-"Search, you will find the printer with the suffix 1178, double-click-"Next, added successfully! At this point, you have successfully added a network printer and can print!
How to share files between two win7 computers is as follows:
1. Click the network icon in the lower right corner of the desktop, and then click "Network and Sharing Center"
2. Then find and click "Change Advanced Sharing Locations" on the left
3. Then click "Enable Network Discovery" and "Enable File and Printer Sharing" respectively, and click Save changes after finishing.
4. Then go back to the "Network and Sharing Center", then click Windows Firewall, and then click Turn off the firewall.
5. Then right-click the folder you want to share, then set the properties, then click the share column, and then click share.
6. Then select the Guest (or Everyone) user as shown in the picture below, and then click Add.
7. Then click the arrow on the right side of the user to set access permissions. Generally, the default is read. After setting up, just click Share.
Now the sharing terminal has been set up. Then on another computer, you only need to enable network discovery and file sharing to see the shared files.
1. The application does not require administrator privileges:
There are two directories that need to be remembered:
%systemroot%usersdefault and %systemroot%userspublic
default folder is Templates for all user profiles. Changing them will affect all new users created later. It is hidden by default and only administrators can change it. The public folder is public to all users in the system. folder, all users can read the files inside. If the file is placed in the desktop folder in this directory, the corresponding file will appear on the desktop of all users (only administrators can make changes to this folder)
If you already have the corresponding icon on your desktop, directly copy the application icon or the program itself to the above two folders, and run the program directly on the ordinary user's desktop.
2. The application requires administrator privileges:
You can use the Runas command to temporarily switch user running programs
Syntax:
runas /user:
Scenario 1: I need to run the registry editor that requires administrator rights under a standard user
Solution:
Log in as a standard user, Windows key + R key to bring up run, and then enter:
runas / user:Administrator regedit.exe
Then the system will pop up the password input box, enter the administrator password. If you need to use it multiple times and do not want to enter the administrator password multiple times, you can create a new shortcut and add the sa parameter, add sa After the parameters, you only need to enter the administrator password once.
7. How to share files between two computers
1. Connect the two computers with a network cable2. Right-click the disk where the file is located on the computer where the file is located, select Sharing-->Advanced Sharing, select Advanced Share tick the shared folder.
Press win+r to open run, enter cmd to open the command prompt, enter ipconfig to query the local IP, use your mobile phone to write down the address,
3. On another computer win+r run and enter \you just IP address,, you can see the shared folders on that computer. For example, if the IP of that computer is 169.254.85.234, then enter \169.254.85.234 in the runtime of this computer
8. How to share folders between two win7 computers
1. Right-click "Network" on the desktop "Open the menu and select "Properties";
2. Then you can see the computer names of all computers in the LAN, click on the computer you want to access;
3. Then you can see the files shared on this computer, click to access.
Method 2:
1. Press the "Win + R" shortcut key to open the run window, enter "\" plus the other party's IP address, and click OK;
2. Then you can see the computer with this IP address Shared folder;
3. Open the shared folder and browse the files inside.
The above is the entire method of accessing shared folders on other computers in Win7. The method is very simple. As long as there is no problem with the other party's sharing settings and the LAN connection is normal, you can access it.
In fact, sharing a printer is very simple. Install the printer driver normally on the computer connected to the printer (printing host), and ensure that the computer and printer can be used normally and the computer that wants to use the printer (Print workstation) Connect to the computer connected to the printer (LAN, WAN, dial-up network is acceptable).
Operation on the print host: Start→Settings→Control Panel→Printer. Right-click the installed and functioning printer, select "Properties", click the "Sharing" tab, share the printer to the network, and set a password if necessary.
Operation on the printing workstation: Start → Settings → Control Panel → Printer. Select "Add Printer", select "Add Network Printer", then find the print host on the network, and follow the prompts to complete subsequent operations. Don't forget to print a test page.
The above is the detailed content of Why can't two W7 computers share files? (How to share files between two W7 computers). For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
