What should I do if a 0xc0000001 error occurs on my computer? When this error code appears on your computer, it usually means that the device encountered a problem reading system files, causing the system to fail to start normally. This can be caused by a variety of reasons, including corrupted files, driver incompatibilities, or hardware issues. To resolve this issue, we recommend you to refer to the detailed guide in this article, which provides troubleshooting steps for different causes. By following these steps, you can quickly and safely fix the problem and get your computer running normally again.
Summary of solutions to blue screen code 0xc0000001
1. First, use the repair function that comes with the computer system. First, press and hold the power button to force the computer to shut down.
Note: If you have important data, please back it up in advance, otherwise it will all be deleted.
2. After shutting down, click the power button to turn it on again. After the desktop is displayed, press and hold the power button again to force shutdown.
3. Then turn on the computer again, and the desktop will appear to force shutdown again. After repeating this operation 3 times,
a prompt "Please wait, preparing for automatic repair" will appear. We won't need to restart again.
4. Then some options will appear. We select "Advanced Options" - "Troubleshooting" - "Initialization".
5. After the initialization is completed, this problem can be solved.
Solution
1. First, we restart the computer, press "shift+F8" during startup to enter the recovery interface and click "Troubleshooting".
2. Select the "Launch Settings" button on the page.
3. Then click the "Restart" button in the lower right corner.
4. After the computer restarts, enter the startup settings menu and select F4 to enter safe mode.
5. Then select "Settings" in the start menu, select "Apps and Features", uninstall recently installed software, and then restart the computer.
6. If the above method cannot solve the problem, we can reinstall the system with a USB flash drive to solve the problem.
Cause:
① Check the hardware and line connection: the indicator light flashes continuously - normal operation; does not light up or stays on without flashing - there is a problem.
② Check the network card and router settings: Make sure the IP address of the wireless network card and the IP address of the wireless router are in the same network segment.
③Wireless encryption: Modify the client’s IP address, install professional anti-virus software and network firewall.
④Upgrade the wireless router firmware: Find the menu and after seeing the options, start preparing to upgrade.
Troubleshooting
①Router administrator access.
②Reset the router.
③Update the router’s firmware.
④Check router compatibility
Method 1:
1. First use the repair function that comes with the computer system. First, press and hold the power button to force the computer to shut down.
Note: If you have important data, please back it up in advance, otherwise it will all be deleted.
2. After shutting down, click the power button to turn it on again. After the desktop is displayed, press and hold the power button again to force shutdown.
3. Then turn on the computer again, and the desktop will appear to force shutdown again. After repeating this operation 3 times, the prompt "Please wait, preparing for automatic repair" will appear. We won't need to restart again.
4. Then some options will appear. We select "Advanced Options" - "Troubleshooting" - "Initialization".
5. After the initialization is completed, this problem can be solved.
Method 2:
1. First restart the computer and hold down "shift+F8" during startup to enter the recovery interface.
2. Then select the advanced options, troubleshooting, startup settings of the interface, and then restart.
3. Wait until the restart is complete, enter the startup settings menu, and select startup safe mode.
4. Finally, press "win+i" to open settings, select "Apps and Features", uninstall all unsafe software and then restart.
1. First use the repair function that comes with the computer system. First, press and hold the power button to force the computer to shut down.
2. After shutting down, click the power button to turn it on again. After the desktop is displayed, press and hold the power button again to force shutdown.
3. Then turn on the computer again, and the desktop will appear to force shutdown again. After repeating this operation 3 times, the prompt "Please wait, preparing for automatic repair" will appear. We won't need to restart again.
4. Then some options will appear. We select "Advanced Options" - "Troubleshooting" - "Initialization".
5. After the initialization is completed, this problem can be solved.
Error code 0xc0000001 is not necessarily caused by hardware damage, but this possibility is not ruled out. This code is not common. Many users suspect that it is caused by hard drive failure, boot program error, memory incompatibility, MBR file damage, etc., but In fact, this is not the case. It is caused by the existence of a hidden partition in the system. Use the DiskGenius tool to clear the hidden partition, or completely format the hard disk and then redo the system to recover.
Restart the computer and hold down the key during startup to open the recovery interface.
Select in turn on the interface.
After the computer restarts, enter the startup settings menu and select safe mode to start.
Select in the start menu, select, uninstall the recently installed software, and then restart the computer. If the fault is caused by newly installed software, this method can solve it.
If an error code appears, it may be that the system has crashed and the system needs to be reinstalled
Reinstall the system and reset system parameters. ,
Needs to set to compatibility mode in bios.
The setting method is:
1. First, right-click the program that cannot run, and then select "Properties".
2. Switch to the compatibility options bar and select "Run Compatibility Troubleshooter".
3. Then wait for the system to analyze the problem.
4. After analysis, click "Try recommended settings".
5. The system will give you a recommended compatibility mode. Click "Test Program" to see if it is available. If available, click "Next".
6. Select "Yes, save these settings for this program".
The above is the detailed content of 0xc0000001 appears on the computer?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
