Featuring a 15.6-inch rotating display on the front, Zalman launches Z10 DS mid-tower ATX case

This site reported on July 29 that Korean electromechanical manufacturer Zalman launched the Z10 DS mid-tower ATX chassis on the 26th of this month.

▲Chassis with semi-expanded display

The chassis has a three-dimensional dimension of 474×220×488 (mm), a volume of 50.9L, supports ATX, M-ATX, and ITX motherboards, and has 7 PCI (e) expansion slots .

Z10 DS is equipped with a manually fixed 4mm tempered glass panel on the left side, and a hinged 15.6-inch display on the front. The screen parameters are as follows:

1080×1920 resolution (9:16 aspect ratio), 60Hz refresh rate, 30ms response time, 250nits brightness, 1000:1 contrast ratio, 45% NTSC / 62% sRGB color gamut coverage, 170° available View angle.

▲Display 90° unfolded chassis

This display adopts a detachable design and can be removed from the chassis for independent use. Zalman also offers a replacement conventional chassis front panel.

▲ Screen independent use mode. The far right is the chassis equipped with a replacement front panel

In addition, the Z10 DS chassis has ventilation mesh holes on the top, bottom and right side and is equipped with a dust filter.

This website has compiled the compatible specifications of the ZalmanZ10 DS chassis as follows:

Zalman pre-installed three 12025 specification HDB bearing fans for this chassis. The two at the front support ARGB lighting effects and rotate at 1100RPM; the one at the rear is a matte version and rotates at 1200 RPM.

The front I/O panel of the Zalman Z10 DS chassis is located on the top right front side, including 2 USB 3.0 Type-A interfaces, 1 USB 3.1 Type-C interface, 1 pair of detached audio interfaces, and a power button, Reset button, LED control button.

The above is the detailed content of Featuring a 15.6-inch rotating display on the front, Zalman launches Z10 DS mid-tower ATX case. For more information, please follow other related articles on the PHP Chinese website!