What should I do if my computer speaker has no sound?

What should I do if my computer speaker has no sound? It can be frustrating when your computer speakers suddenly lose sound. But, don't worry! PHP editor Youzi will bring you solutions to the common problem of no sound in computer speakers. From simple checks to advanced troubleshooting, our guides will help you quickly identify and fix problems so your speakers are playing great music again.

1. What should I do if my computer speaker has no sound?

Go to the hospital to see the ENT department first.

Then check to see if the power is on

Read the manual

Restart the computer

Try it on someone else’s computer

You know the troubleshooting method

As long as you are not deaf, it’s easy to solve

2. The Philips computer speaker has no sound?

Firstly, check whether your connection is correct. Secondly, check whether the switch is turned on. Thirdly, if the above reasons are eliminated, you can contact customer service to confirm whether there is a hardware problem.

3. There is no sound from Dell computer speakers?

1. Poor contact

　The internal circuit of the speaker has aged due to long-term use. If the speaker has a poor contact when connected to the computer, there may be no sound.

Solution: First check whether the audio connection is normal. If there is still no sound after making sure it is intact, you can install the driver and see if it is not good after installing the driver. That means the audio is broken. ​

　2. The audio cable is not connected properly

If the audio cable is not plugged into the corresponding jack, the volume of the audio is set to the minimum position or the speaker is not powered, the computer will have no sound.

Solution: First turn on the audio switch and turn up the volume. If there is no sound, look at the back of the computer host. The audio output at the back usually has three ports, which are red, green and blue. The red one is the microphone. , green is the speaker, blue is the output, the speaker wires are also colored, just plug into the jack of the same color. After plugging it in, turn up the speaker volume and try to see if there is any sound.

　3. The audio volume is switched to mute or too low

Sometimes the volume is accidentally set to mute or the audio volume knob is adjusted to the minimum volume, and there will be no sound.

Solution: Click the speaker icon in the lower right corner of the system, first confirm whether the volume is turned on, and adjust the sound to an appropriate size. If the "Small Speaker" icon in the lower right corner is also missing, go to the "Control Panel", double-click the "Sound and Audio Devices" item, in the pop-up "Sound and Audio Device Properties" window, select the "Volume" page, and then Adjust the volume adjustment slider to the appropriate position, and check the box next to "Put the volume adjustment icon into the taskbar", confirm and exit.

　4. The computer sound card is damaged

　Generally, the lack of sound on the computer is mostly related to the software, but the damage to the sound card itself does not rule out.

Solution: If it is determined that the sound card hardware is damaged, you can buy an independent sound card and plug it in.

4. There is no sound when the mobile phone is used as a computer stereo?

1. When encountering this situation, you should first check whether the sound card driver is installed correctly, and there should be some settings on the sound card to set the microphone, and whether the speaker sound is checked and confirmed, and whether the volume is adjusted to Set the volume appropriately, then restart the computer and try again. 2. And you need to set the sound card to be external. It is recommended to turn off the sound card on the motherboard in the CMOS settings. In this way, the default is the external sound card

5. How to solve the problem of no sound from the computer speaker?

Answer: 1. Hardware reasons

1. Poor contact. The internal circuit of the speaker has been aged due to long-term use. When the speaker is connected to the computer, there may be no sound due to poor contact.

Solution: First check whether the audio connection is normal, and if there is still no sound after making sure it is intact, you can install the driver and see if it is still not good after installing the driver, it means the audio is broken.

2. If the audio cable is not connected properly, the audio cable is not plugged into the corresponding jack, the volume of the audio is set to the minimum position or the speaker is not powered, the computer will have no sound.

Solution: First turn on the audio switch and turn up the volume. If there is no sound, look at the back of the computer host. The audio output at the back usually has three ports, which are red, green and blue. The red one is the microphone. , green is the speaker, blue is the output, the speaker wires are also colored, just plug into the jack of the same color. After plugging it in, turn up the speaker volume and try to see if there is any sound.

2. Software reasons

1. Abnormal sound card driver: The sound card driver is disabled, the sound card driver is damaged, or an unsupported device driver is installed, which are the main reasons why the computer speaker has no sound.

　

Solution: Right-click the "My Computer" icon, select "Properties" - "Hardware" - "Device Manager", open "Sound, Video, and Game Controllers", if a yellow "?" appears in front of it , indicating that the sound card driver is not installed properly. In this case, simply reinstalling the sound card driver can solve the problem.

2. Virus in the computer: If the computer is infected with a virus, it will damage the files related to audio processing, especially the system components related to Dsound. ​

Solution: Use anti-virus software to check whether there are viruses on your computer. If there are viruses, quickly scan them and eliminate them completely. If the viruses are too stubborn and cannot be completely eliminated, you can restore or reinstall the system with one click.

Note: Connect the speaker with other audio sources to see if there is sound. If there is still no sound, the speaker itself may be faulty, such as the speaker voice coil is burned out, the speaker voice coil lead is broken, etc. If it is within the warranty period, you may wish to contact us The speaker merchant handles it.

6. How to set up the Philips computer stereo when there is no sound?

Set the speakers to left and right channels. First check whether your connection is correct, then check whether the switch is turned on, or whether the audio is set to the left and right channels. The plug of the computer is not plugged in properly. It may be that the contact is not good, and only one side of the audio is received. Just turn the plug and adjust it. , if the above reasons are eliminated, you can contact customer service to confirm whether there is a hardware problem.

7. How to set up the desktop computer audio when there is no sound?

Step/Method 1

Step 1: Right-click the volume icon on the desktop menu bar.

Step/Method 2

Step 2: Left-click and select "Open Sound Settings" to enter.

Step/Method 3

Step 3: Find the advanced sound options and click "App Volume and Device Preferences" to enter.

Step/Method 4

Step 4: Find the output and select the recognized device name.

8. How to restore the sound from the desktop computer speaker?

1.

Right-click the volume icon on the desktop menu bar of your desktop computer.

2.

Left click and select "Open Sound Settings" to enter.

3.

Find the advanced sound options and click "App Volume & Device Preferences" to enter.

4.

Find the output and select the recognized device name to call up the sound.

9. What software can solve the problem of no sound in computer speakers?

Download Super Rabbit. There is a driver angel inside. Select your sound card and choose to download the driver. If the driver is successfully installed, the sound will come back.

10. What should I do if my ASUS computer speaker has no sound?

The reasons and solutions for no sound from ASUS computer speakers are as follows:

No sound from the computer seems simple, but in fact sometimes the problem is more complicated, involving both hardware and software issues. Therefore, we must first find out the cause, whether it is software or hardware failure, and then prescribe the right medicine for the problem. The troubleshooting method for computer silence is as follows:

1. First check whether there is a "small speaker" on the right side of the taskbar. If so, the sound card is normal. The cause of the fault may be that the system sound is too low, or mute is set, or the speaker is faulty. You can continue to check whether there is sound output through the headphones. If there is, the speaker is faulty.

2. If there is no "Small Speaker" on the right side of the taskbar, then click the "Control Panel/Sounds and Audio Devices" command to open the "Sounds and Audio Device Properties" dialog box, and click "Sound" in this dialog box "tab, then click one of the program events (such as a program error) in the "Program Events" column, then select a sound type, and then see if the "Preview" button on the right is black. If it is black, the sound card is normal. The cause of the fault may be that the system volume is too low, or mute is set, or the speaker is faulty.

3. If the "Preview" button in the "Sound" tab is gray, then click the "Control Panel/System Properties/Hardware/Device Manager" command to see if there is a yellow "?" in the "Device Manager" window? "Options.

4. If there is a yellow "?", check whether the option is a sound card device option (the sound card device option usually has keywords such as "Audio" or "Sound"). If it is an option for the sound card device, it means that the sound card driver is not installed. Reinstall the sound card driver and the silent problem will be solved.

5. If the yellow "?" option does not refer to the sound card device, or there is no yellow "?" option, then check whether there is a yellow "!" option under the sound, video and game controller tabs.

6. If there is a yellow "!", it may be caused by a mismatched sound card driver or an aging sound card. Then delete the option with "!" and reinstall the sound card driver.

7. If there is no sound card option in the "Device Manager" window and the sound card is an integrated sound card, then restart the computer and enter the BIOS program. Then check whether the peripheral device option in the BIOS is set to "Disabled", if so, change it to "Enable". If this item is set to "Enable", the motherboard sound card circuit may be damaged, and the sound card circuit can be repaired.

The above is the detailed content of What should I do if my computer speaker has no sound?. For more information, please follow other related articles on the PHP Chinese website!