Although the automatic computer sleep function saves power, it may also interrupt work at critical moments. For this problem, PHP editor Baicao brings you a detailed solution and introduces how to prevent the computer from automatically sleeping. This article will guide you through adjusting power plan settings, disabling hibernation options, and using third-party tools and the command line to control hibernation behavior. With these methods, you can ensure that your computer stays awake when you need it and avoid the hassles of hibernation.
Let me tell you a method: This method does not require complicated settings. You can prevent the computer from sleeping by opening a program. That is to use "Xunlei Kankan". Because the computer could not hibernate before, I never found the reason, so I ignored it. After using it for a long time, I found that every time I watched an American TV series, it would not sleep, so I locked the "Xunlei Kankan" video playback software, and after closing it, it actually went to sleep automatically. In other words, if you open the "Xunlei Kankan" video playback software (it only works if you open the video and click pause), the computer will not sleep.
If the computer does not perform any operation for a long time, it will automatically enter the sleep state. If we do not want the computer to automatically sleep, how should we set it? Let me briefly explain it to you below.
How to cancel automatic computer hibernation
1. Open the control panel and select System and Security.
2. Enter the power options.
3. Click "Change computer sleep time" on the left.
4. Select the time you want to automatically enter sleep mode and confirm the modification.
Right-click on a blank space on the desktop, select Personalize, find the screen saver, click Change Power Settings,
The first option is to find "Change computer sleep time" on the left and see "Put the computer to sleep" Time selection, select the time and click "Save changes";
The second option is to change the plan settings, and you will also see the time selection of "Put the computer to sleep", just modify it.
To set the computer to automatically sleep, you only need to turn on the computer, open the start menu and click Control Panel, then click Hardware and Sound, then click Power, and finally choose to change the computer sleep time and monitor off time, select in the page that opens After setting the content, save the changes.
1. Start-Control Panel, open the control panel.
2. Find "Power Options" in the control panel and click to enter.
3. Then select Balance, then click on the right side of Balance to change plan settings, or other.
4. If you don’t want the computer to sleep, select Never in the item that puts the computer into sleep state.
5. For the screen to automatically turn off after a period of time, that is, the screen automatically turns black, you can choose to turn off the display. If you don’t want to turn it off, choose Never, otherwise you can choose the time according to your own situation.
6. The first item is the same as reducing the screen brightness. Set a time or never. After the time is up, the screen will dim slightly, and it will recover after the mouse or keyboard is moved.
The method to turn off the automatic sleep mode of the computer is as follows
1. Start-Control Panel, open the Control Panel.
2. Find "Power Options" in the control panel and click to enter.
3. Then select Balance, then click on the right side of Balance to change plan settings, or other.
4. Turn off the computer to sleep, then select Never in the item that puts the computer into sleep state.
The automatic computer sleep function is a normal built-in function of the computer. Then we can disable or enable this function by turning the automatic sleep function on or off. If the automatic sleep function is turned on, the computer can be set to run within a certain period of time. If the computer does not If it is operated by a human, it will automatically enter the dormant state. Of course, you can also wake up the computer again.
Frequent automatic computer hibernation is a problem that many users often encounter. When you are working on the computer or watching videos, and suddenly find that the computer automatically sleeps, it may cause trouble to your work and usage experience, and even affect your productivity.
Generally speaking, the computer automatically hibernates may be caused by the following reasons:
Power setting issues Setting changes caused by system updates Hardware failures Software conflictsFor If your computer frequently sleeps automatically, you can try the following solutions:
Check the power settings to prevent the computer from automatically entering sleep mode. Check for system updates to see if any settings have been changed. Troubleshoot hardware problems, such as checking the power adapter or battery status. Uninstall recently installed software to resolve possible software conflicts.If If the above methods cannot solve the problem, it is recommended to seek help from professional computer maintenance personnel or manufacturer customer service to eliminate possible hardware faults and conduct more in-depth troubleshooting of the system.
Thank you for reading this article, I hope this article can help you better solve the problem of automatic computer hibernation.
1. Check whether the computer supports this function!
Check method: click "Start" - "Run"; then enter "CMD", then click OK, then enter "powercfg -a" in the command window, remember - before There is a space; press "Enter" when finished; the result displays Standby (S3); indicating that your machine supports the sleep function. If it is not supported, you need to contact the computer manufacturer to upgrade Blos.
2. System setting solution:
Many times it is because this function is not turned on. First, right-click My Computer, then select Manage, then open "Device Manager" - "Mouse and other pointing devices". Then right-click and select Properties. Then switch to "Power Management" and tick the box!!
Due to incorrect BIOS settings, the advanced power management function is enabled in your computer's motherboard BIOS, and the advanced power management function is also enabled in the Windows system, resulting in a conflict between the two.
Solution:
Turn on or restart the computer, press the F2 key to enter the bios (usually press the F2 key for laptops, it depends on your computer screen prompts), find "power managemant features" and press Enter to enter, and set the parameters inside to Set all "on" items to "off", press ESC to return to the upper-level interface, select Save&exit step (save settings), of course, you can also press F10 directly.
Press Y and enter. The computer will automatically restart and log in to the system. The problem should be solved.
To turn off hibernation, right-click a blank space on the desktop - Properties - Screen Saver - Power - Hibernation - Remove the check mark in front of "Enable Hibernation", click "OK", and then confirm.
The above is the detailed content of The computer automatically sleeps, how to stop it from sleeping?. For more information, please follow other related articles on the PHP Chinese website!
The role of applet tag in html
A complete list of commonly used public dns
How to open bak file
ps brightness contrast shortcut keys
Session failure solution
mobile phone screen tft
The difference between static web pages and dynamic web pages
The difference between arrow functions and ordinary functions
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
