Lenovo laptop has a black screen when it is turned on, which is very distressing and affects the user experience. PHP editor Youzi has compiled this guide to provide comprehensive solutions. Whether it's a hardware failure, software issue, or another potential cause, this guide will help you diagnose and resolve your black screen issue step by step. By carefully following the solutions we provide, you can quickly restore your laptop to normal operation and avoid the risk of data loss or device damage.
Graphic card problem: If we are using a discrete graphics card, we can try to pull out the discrete graphics card and use the motherboard integrated graphics card to try, or try to change the video output port of the graphics card; if it can boot normally, the former can try to use alcohol or eraser Clean the golden finger part of the graphics card. The latter may be a fault in the video output port.
2. Monitor problem: The monitor may be broken. You can try changing the monitor, but the probability of the monitor is relatively small. If the monitor indicator light is green after turning on the computer, but there is no image, the monitor may be faulty.
This situation is directly related to the hardware. It is recommended to do the following:
1. Remove the battery on the back of the notebook, connect it to the computer only with the power adapter, and try to turn it on. If it turns on normally, it is caused by poor battery contact or battery failure. .
2. Only use the battery and do not connect the power adapter. If the power is turned on normally, it should be caused by a problem with the power adapter or a short circuit in the notebook power interface.
3. Unplug the power cord, remove the battery, and hold the power button for 30 seconds without letting go. Try to turn on the computer. If it turns on normally, it may be caused by an abnormal motherboard BIOS.
4. Unplug the power cord, remove the battery, open the back cover of the memory, plug and unplug the memory, wipe the golden finger part with an eraser, and re-plug it tightly (do not reverse it) 5. If the above operations cannot solve the problem, it is recommended to send the notebook for repair Center detection.
A normal computer will not turn on the screen when it is turned on. It may be due to a problem with a certain part of the computer. At this time, you can ask maintenance personnel to perform maintenance.
, power adapter problem. If the laptop screen is black when you turn it on, the
indicator light is on, but the main screen is black. Put your hand on the fan of the main unit and there will be no wind. If possible, you can use a multimeter to check whether the power adapter reaches the rated voltage. If there is no voltage in each circuit, then it is a problem with the power adapter. Just remove and replace it.
2. There is a problem with the startup switch, black screen when booting, and no self-test. Use the meter needle to short-circuit the startup terminal on the motherboard, and it can be used normally.
3. The memory, graphics card, CPU, etc. are faulty and there is no response when booting. To check the CPU, check whether the voltage is normal. If not, check whether the starting resistance is normal. However, if the starting resistance is too large, you can use a substitute table or substitute. Another thing to check is whether the motherboard Normal, if these are normal, then it is where the virtual soldering occurs
There are
possibilities: 1. If other indicator lights are working normally and there is sound when turning on the phone, then the screen is turned off. Use fn+F2 (the specific computer shortcut keys vary) to open it;
2. If it is poisoned, try using anti-virus software.
3. The screen is broken, and the screen has flickered or blurred. You can use a cable to connect it to another monitor to see if it is powered on. If other machines display normally, the display screen is probably broken. Get it repaired
If you have a black screen when you start up, press f8 to enter safe mode and restart, or reinstall the system and replace the hard drive
The machine has a built-in three-core 52.5Wh lithium polymer battery. It does not support disassembly and uses a three-phase plug charger. The charger power is 135W. The input electrical parameters are 100-240V/50-60Hz; the output current is 20V6.75A
You need to check whether the graphics card fan is normal. If it is not normal, a black screen will appear when Lenovo Xiaoxin 15 is turned on
There are two main reasons: one is hardware failure, and the other is software conflict. The difference between the two mainly lies in the location where the black screen occurs, that is, whether the black screen occurs when turning on the machine, or after starting the machine normally. A black screen appears during the process.
When a "black screen" suddenly appears after turning on the computer, please listen to the PC speaker on the TV to see if there is an alarm sound.
If the PC speaker emits an alarm sound, then we can initially determine the hardware part where the problem may occur based on the length of the sound. For example, if the PC speaker alarm sound is one long and four short when the TV is turned on, then based on this prompt, you can easily determine that the problem occurs on the graphics card.
If this is the case, you can open the case and see if your graphics card is inserted securely. If it feels a little loose, please pull out the graphics card and reinsert it and secure it with screws.
컴퓨터 화면이 검게 변한 후 전원을 끄고 다시 시작하거나 시스템을 다시 설치할 수 있습니다
The above is the detailed content of Lenovo laptop has a black screen when it starts up?. For more information, please follow other related articles on the PHP Chinese website!