For desktop Lenovo computers, you may face some difficulties when reinstalling the system. In order to solve this problem, PHP editor Strawberry brings you a detailed guide to reinstalling the system. This guide will guide you step by step on how to prepare the materials needed to reinstall the system, download the system image, create a boot disk, and complete the reinstallation process. Please continue reading the following article to learn the complete steps for reinstalling the system on your desktop Lenovo computer.
First you need to find a system installation disk, insert the system installation disk and follow the prompts to reinstall. Then remember to download the driver.
For system reinstallation of Lenovo computers, you can use a USB flash drive through the following steps:
1. First, prepare a blank USB flash drive and a Windows operating system installation CD or image file.
2. Insert the U disk into the computer USB interface, turn on the computer, enter the BIOS settings, and set the U disk as the startup disk. Different computers may have slightly different methods of entering the BIOS. You can press the corresponding keys (such as F2, F10, Delete key, etc.) when booting to enter the BIOS settings.
3. Turn off the computer, insert the installation CD or image file of the Windows operating system, and start the computer again. The system installation wizard will appear.
4. In the system installation wizard, select custom installation (or advanced installation) to enter the system partition setting interface. You can clear the original system partition in this interface and assign a usable system installation partition to the USB flash drive by creating a new partition. For specific operation methods, please refer to the prompts in the installation wizard.
5. Install the Windows operating system to be installed into the newly created system partition. During the installation process, you need to select the installation method, language, time zone, installation options and other related settings, and make selections based on the actual situation.
6. After the installation is completed, set the computer's startup disk to the original hard disk from the BIOS settings.
It is worth noting that before reinstalling the system, you must back up your important files and data to avoid losing data during the installation process. In addition, do not change partition settings and important system settings at will during the installation process to avoid causing system errors.
The first step is to prepare a system disk and directly download an installation package. After downloading, download it to a USB flash drive and you can install the system directly. The second step is to enter the PE boot mode if 8 and start it directly to install the system. After installing the system, you can enter the system in about 20 minutes. After entering the system, your system can be used normally. After simple settings, the entire system is installed. 4. How to reinstall the Lenovo computer system and how to install the system tutorial?
1. Make a USB boot disk, and then copy the downloaded Lenovo win7 system iso file directly to the GHO directory of the USB flash drive:
2. Insert the USB flash drive into the Lenovo computer , after restarting, keep pressing the F12 or Fn+F12 shortcut keys to open the boot menu, select the U disk item and press Enter:
3. Boot from the U disk to enter the main menu, press number 2 or press the up and down arrow keys to select Enter. Start the PE system:
4. For users who do not need partitions, go directly to step 6. If you want to completely repartition the disk, you need to back up all files, then double-click to open it in the PE desktop, right-click the hard disk and select:
5. Set partition The number and size of partitions, the main partition is 35G or more, and it is recommended to be 50G or more. If it is a solid-state drive, check "Align Partition" to align it with 4k, click OK to perform the hard disk partition process:
6. After partitioning, open it and select Lenovo win7 system iso image, the gho file will be extracted at this time. Click the drop-down box and select the gho file:
7. Then click "Restore Partition" and select the location of the system disk, usually C drive, or select according to the "volume label" and disk size. , click OK:
8. A prompt box pops up, check "Restart after completion" and "Boot Repair", click Yes to start the reinstallation process:
9. Go to this interface and perform Lenovo win7 system reinstallation to To operate the C drive, wait patiently for the progress bar to be completed:
10. After the operation is completed, the Lenovo computer will automatically restart. At this time, pull out the USB flash drive and boot into this interface to reinstall the win7 system and system configuration process:
11. Finally, boot into Lenovo's new win7 system desktop, and the Lenovo computer win7 system will be reinstalled.
5. How to reinstall the system of Lenovo computers - How to reinstall the system of Lenovo laptops How to reinstall the system of Lenovo laptops?
1. Preparation
1. Download Lenovo win7 system
3. 4G or larger U disk, and then make a Dabaicai U disk boot disk
3. Settings BIOS boots to U disk
2. Step
1. After making the U disk boot disk, copy the downloaded Lenovo system iso file directly to the GHO directory of the U disk, insert the U disk into the Lenovo z470 laptop, and restart Then keep pressing the F12 shortcut key to open the boot menu.
If there is no response, press the Novo one-key recovery button in the shutdown state. After booting, enter the Novo menu, press the ↓ direction key to select the Boot Menu item, and press the Enter key
2. In the startup item management window, select the USB HDD item and press Enter to boot from the U disk. Boot from the U disk to enter the main menu. Press number 2 or press the up and down arrow keys to select Enter to start the pe system
3 , New computers generally need to be partitioned. If you need to repartition, you need to back up all files, then double-click to open it in the PE desktop, right-click the hard disk and select.
Set the number of partitions and the size of the partitions. The primary partition is 35G or above, and it is recommended to be 50G or above. If it is a solid-state drive, check "Align Partitions" to align it to 4k, and click OK to execute the hard disk partition process.
4. After partitioning, open it and select the Lenovo system iso image. The gho file will be extracted. Click the drop-down box, select gho, and then click "Restore Partition" to select the location where the system is to be installed.
Usually it is the C drive. Or select according to "Volume Label" and disk size, and click OK. A prompt box will pop up, check "Restart when complete" and "Boot Repair", and click Yes to start the computer restore.
There are many one-click online system reinstallation tutorials on the Internet. If you don’t know how to judge or install the system, you can take a look at the following video tutorial on one-click online system reinstallation using a three-step installation tool for beginners.
In addition to installing win7, win8, win10, and winxp systems, this method is suitable for all models.
Hope that helps.
The first step is to back up the files on the desktop and the c drive to other partitions before reinstalling the system.
Step 2: Download and install the "Xiaobai One-Click System Reinstallation" software, open it and select "Create System".
Step 3: Click "Make Local" and install the PE system to a partition other than the c drive, then click "Download to D drive" and confirm.
Step 4: After restarting the computer, you can see that the operating system has two columns: win7 and "XiaoBai-WinPE". Use the up and down keys and the Enter key to select the "XiaoBai-WinPE" system to enter.
Step 5: After starting the computer, you can see the "Xiaobai Installation Tool" on the desktop. After running this software, select the target partition for system installation, check "Automatically restart after installation" and click "System Download".
Step 6: The PE system allows users to choose other systems they want to install when connected to the Internet.
Step 7 During the system reinstallation process, the system will restart multiple times, and users need to follow the prompts.
Step 8: After the system update is completed, set the desktop resolution and update the relevant drivers.
Make a U disk boot disk, and then copy the downloaded Lenovo win7 system iso file directly to the GHO directory of the U disk.
2. Insert the U disk into the Lenovo computer. After restarting, press the F12 or Fn+F12 shortcut keys to open the boot menu. Select the U disk item and press Enter. Boot from the U disk to enter the main menu. Press number 2 or press Use the up and down arrow keys to select Enter to start the pe system.
3. For users who do not need partitioning, please go directly to step 6. If you want to completely repartition the disk, you need to back up all files, then double-click to open it in the PE desktop, right-click the hard disk and select.
4. Set the number of partitions and the size of the partitions. The primary partition should be 35G or more, and it is recommended to be 50G or more. If it is a solid-state drive, check "Align Partitions" to align it with 4k, and click OK to execute the hard disk partition process.
5. After partitioning, open it and select the Lenovo win7 system iso image. The gho file will be extracted. Click the drop-down box and select the gho file.
6. Then click "Restore Partition" and select the location of the system disk, usually the C drive, or select according to the "Volume Label" and disk size, and click OK.
7. A prompt box pops up, check "Restart after completion" and "Boot Repair", click Yes to start the process of reinstalling the system:
8. Go to this interface and perform the operation of reinstalling the Lenovo win7 system to the C drive , wait patiently for this progress bar to complete.
9. After the operation is completed, the Lenovo computer will automatically restart. At this time, pull out the USB flash drive and boot into this interface to reinstall the win7 system and system configuration process.
10. Finally, boot into Lenovo's new win7 system desktop, and the Lenovo computer win7 system will be reinstalled.
The method of reinstalling the Lenovo computer system is as follows
1. Make a USB boot disk, and then copy the downloaded Lenovo win7 system iso file directly to the GHO directory of the USB flash drive:
2. Insert USB on the Lenovo computer After restarting, keep pressing the F12 or Fn+F12 shortcut keys to open the boot menu, select the U disk item and press Enter:
3. Boot from the U disk to enter the main menu, press number 2 or press the up and down arrow keys to select Enter , start the PE system:
4. For users who do not need to partition, go directly to step 6. If you want to completely repartition, you need to back up all files, then double-click to open it in the PE desktop, right-click the hard disk, and select:
5. Settings The number of partitions and the size of the partitions, the main partition is 35G or more, and it is recommended to be 50G or more. If it is a solid-state drive, check "Align Partitions" to align 4k, click OK to perform the hard disk partition process:
6. After partitioning, open it and select Lenovo win7 System iso image, the gho file will be extracted at this time, click the drop-down box, select the gho file:
7. Then click "Restore Partition" and select the location of the system disk, usually the C drive, or according to the "volume label" and disk size Select and click OK:
8. A prompt box will pop up, check "Restart after completion" and "Boot Repair", click Yes to start the process of reinstalling the system:
9. Go to this interface and perform the operation of reinstalling the Lenovo Windows system to the C drive. Wait patiently for the progress bar to complete:
10. After the operation is completed, the Lenovo computer will automatically restart. At this time, pull out the USB flash drive and boot into this interface to reinstall the Windows system and system configuration process:
11. Finally start Enter Lenovo's new Windows system desktop, and the Lenovo computer system will be reinstalled.
1. Use the shortcut key win+r to open the run, enter "devmgmt.msc" in the run window and press the Enter key to open the device manager.
2. In the Device Manager, expand Network Adapters, right-click the current network card and select "Update Driver".
3. Select "Search automatically for updated driver software" in the update driver window.
4. After the system completes the installation of the network card driver, you can access the Internet normally.
The above is the detailed content of How to reinstall the system on a desktop Lenovo computer?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
