How to maintain laptops?-Troubleshooting-php.cn

Laptops are essential tools for our daily work and study, but it is particularly important to maintain them correctly during use. PHP Editor Apple brings you a detailed guide to laptop maintenance, from cleaning and maintenance to battery use, to preventing common faults and hidden dangers, and comprehensively analyzes the maintenance methods of laptops. If you want to extend the service life of your laptop and improve your use experience, please continue reading the following content to obtain expert laptop maintenance tips.

How to maintain laptops?

1. How to maintain a laptop?

1. Cleaning: Clean the computer surface and keyboard regularly. You can use special detergent or soft cloth to wipe it. Turn off the computer and disconnect the power source when cleaning to avoid damaging the computer.

2. Avoid overheating: Poor computer heat dissipation can cause overheating, affecting performance and lifespan. When using a computer, you should maintain a well-ventilated environment. Do not block the heat dissipation vents of the computer. You can use a radiator to assist heat dissipation.

3. Avoid collisions: The computer casing is easily impacted and squeezed, causing damage to the computer. When using the computer, handle it with care and do not place it on the ground or hard objects.

4. Avoid over-discharge: Long-term use of low battery power will affect battery life, and it should be charged in time. At the same time, you can set battery management policies to reduce computer power consumption and extend battery life.

5. Install anti-virus software: Installing anti-virus software on your computer can effectively prevent viruses and malware from damaging your computer, and protect personal privacy and data security.

2. How to maintain a laptop?

1. Battery maintenance: Do not charge at too high or low current, and avoid charging when the voltage is unstable.

2. Keyboard maintenance: Choosing a keyboard protective film can effectively reduce the wear and tear of the keyboard and prevent dust and debris from falling into the gaps of the keyboard. The dust on the keyboard should be cleaned regularly, and you can use a small brush to clean it. 3. Display maintenance: Apply a protective film to prevent scratches and dust absorption on the screen, reduce squeezing and bumping movements, avoid damage to internal components due to heavy pressure, and avoid sunlight exposure.

3. How to maintain your laptop?

There are roughly the following points

Appearance part

1. Top film, that is, the back of the display needs to be filmed to prevent scratches, because even metal materials will be scratched.

2. Use a display screen film to prevent the display screen from being scratched due to some reasons, which is irreversible. If the film is scratched, just replace it.

3. The soft film on the keyboard prevents dust from entering and can also prevent splashing to a certain extent. However, a glass of water is not enough, but accidentally dripping two drops of cola is still no problem. In addition, once you put on the soft film on the keyboard, you need to pay attention to one problem. The keyboard will definitely come into contact with the screen after closing the cover. If you put on the soft film on the keyboard, be sure to attach the monitor film, otherwise all the dirt on the keyboard will stick to the screen. One solution is to only put the soft film on when you are using it, and be sure to take it off once you want to close the screen. Leave alone.

4. Tear off the graphics card logo and processor logo under the keyboard, and then apply a film, which is where the wrist contacts. You can choose a different film based on your personal comfort. I personally prefer the matte one.

Since there is no special film for this position, you have to cut it and apply it yourself. If you find it troublesome, you don’t have to apply it.

Tear off the logo because the glue will soften after the notebook gets hot during operation, and the logo will shift due to contact with the wrist, and eventually fall off, leaving a large amount of glue on it, which greatly affects the user experience. Of course, this problem can also be solved by applying the film directly without tearing it off.

In addition, the main reason for applying the film is that the grease on the hand bowl will stick to the computer due to the heat generated when using the laptop, so frequent wiping is the best.

5. Dust-proof soft rubber interface plugs are used to plug infrequently used interfaces, such as USB interfaces, network interfaces, headphone/microphone interfaces, and SD cards.

6. Keyboard cleaning glue is sold on a certain treasure. It is very cheap. Buy 10 bags and put them in your computer bag. If it gets too dusty, take a piece out and dip it in it. Use it and throw it away.

7. Choose a suitable computer bag and provide it with some A4 paper or other padding materials for collision protection to prevent serious dents caused by accidental bumps in the computer bag. The space should be large, leaving enough space for equipment such as transformers and mice, and placing them separately to prevent friction and bumps during transportation. Packing is very important, and these problems are usually fatal. A backpack is recommended, try not to carry a handbag or shoulder bag.

---------------------------------Separating line------------------ ------------

Core part

1. Pay attention to the use environment. Moisture and dust are mortal enemies. Moisture will cause the fan to operate poorly, and eventually the cooling efficiency will decrease. Internal metal parts, such as USB The interface will also rust, and even the cooling after shutting down may cause condensation of water in the internal circuit, which is basically useless.

Dust, once the laptop is out of warranty, take it apart and clean it immediately. Open the bottom cover of the machine, clean the dust from the air inlet of the radiator, and clean the fan a little. Or after being forced to use it in an area with extremely windy sand and dust, it must be cleaned, especially the fan. The reduction in the efficiency of the cooling system means a reduction in performance. If it is lower than a certain level, the CPU will reduce the frequency.

2. If it has been used for more than one and a half years, find tools to carry out major disassembly, remove the CPU cooling cover, and replace the silicone grease. If there is a GPU, do the same. Improve cooling performance. If you are too lazy to find a computer repair shop.

3. If there is any space in the mechanical hard drive, it must be filled. This will make the structure more stable and prevent damage to the mechanical hard drive from deformation and vibration. This means that some notebooks have a mechanical hard drive position. Only one disk is shipped from the factory, and the other position is Vacant.

That’s all for laptop maintenance. To be honest, with the current iteration speed, laptops are not much better than mobile phones. When the laptop needs maintenance, it should basically be replaced. Therefore, when processing data, be sure not to place it randomly. Commonly used software must have installation files. Software-related usage data must also be backed up. Prepare a mobile hard drive and be ready to replace hardware at any time. This is also part of software maintenance. Use logic Structure is also very important. If you place files randomly and use software unreasonably according to the hardware, performance will also be compromised.

That’s it, I hope it helps.

4. How to maintain laptop battery?

1. In Windows Power Management, set the power usage plan to "Always on" and turn off the following options. All menus related to turning off the device are set to "Never".

2. Take out the battery and leave it for half a month to a month, so that the battery will be exhausted and the power supply will be used to maintain the operation of the microprocessor module. When the module is charged again, it will automatically return to its original, newer state.

3. Disassemble the battery, disconnect the control circuit from the battery, and discharge the circuit board. An artificial method to restore the initial state by forcing a circuit reset.

4. In the "Alarm" tab, set the "Low Power Alarm" to 10%. If the operation is set to "Do Not Operate", set the "Severe Power Lack Alarm" to 3%. Adjust the screen brightness during "Standby" to the lowest level.

5. Confirm that all windows have been closed and all data from previous work has been saved. Check whether the battery power exceeds 80%, unplug the power source and all external devices. At this time, wait for the laptop to automatically discharge. After discharge, the laptop will automatically shut down and plug in to charge the laptop. Be sure to wait until full before turning on the power, and reset settings before calibrating.

6. When you use the computer for a long time, try to adjust the battery to energy saving rather than high efficiency, so that the battery can be better maintained.

5. How to maintain a laptop well?

1. Battery maintenance

Do not charge at too high or too low current, especially when the voltage is unstable. Try to avoid charging or charging when the discharge is insufficient. Excessive discharge is best at room temperature indoors.

2. Keyboard maintenance

Choosing a good keyboard protective film can effectively reduce the wear and tear of the keyboard and prevent dust and debris from falling into the gaps of the keyboard. Wash your hands before using the laptop to avoid stains on your hands from staining the keyboard and the keyboard. Dust should be cleaned regularly, you can use a small brush to clean.

3. Display maintenance

Putting a protective film on your laptop can effectively prevent scratches and prevent the screen from absorbing dust, reduce squeezing, pressing, bumping and other actions to avoid damage to internal components due to heavy pressure, and avoid Sun exposure. Prolonged sun exposure may cause the LCD screen temperature to be too high, thus accelerating aging.

6. How to maintain the laptop battery?

1. The life of the laptop battery should be maintained from the beginning of use. When you first buy the laptop, you should use up the battery and then fully charge it, then fully charge it and then use it up. Repeat this three times, which will help activate the battery better.

2. If possible, try to use an external power supply. This will reduce the chance of battery use, and the battery will be better maintained and have a longer life.

3. Avoid charging for too long. The battery has a certain memory effect. Charging for too long will be harmful to the battery.

4. When using the battery, be sure to protect it from exposure to the sun, moisture, corrosion from chemical liquids, and avoid contact between battery contacts and metal objects.

5. In addition to recharging after running out of power 3 times before starting, do not recharge the battery below 10% during normal use, otherwise the service life of the battery will be shortened.

6. If the laptop battery is not used for a long time, there is no need to unplug the battery. You only need to use the battery once a month to ensure that the battery is in good storage condition and will not damage the battery.

7. How to maintain a laptop if it is not used for a long time?

Maintenance methods for laptops that are not suitable for a long time:

1. Be sure to clean the dust on the laptop, otherwise it will corrode the laptop and cause the paint to peel off. The battery and machine should be placed in a dry and cool place, away from sunlight, and covered with cloth or other things to prevent dust.

2. The battery can be removed, but the time in the system will be confused.

3. Store the notebook well and try not to get dusty. The battery can be stored in a place where the temperature is not too high, or you don’t need to remove it at all.

8. How to maintain the battery of the laptop I just bought?

As a professional second-hand notebook seller, battery loss has always been a headache. A good battery is inseparable from loss, but good usage habits will make the battery last longer and age more slowly!

1. 完全に充電された状態でコンピューターを使用する際の最大の問題は「ストレージパッシベーション」です (ストレージパッシベーションとは、充電が完了したことを示しているにもかかわらず、使用中に電圧が急激に低下し、通常に比べて容量が減少することを意味します)完全に充電されている場合、ストレージのパッシベーションが最悪になります。一年中フル充電された状態でコンピューターを使用すると、パッシベーションが発生し、高温によってもパッシベーションとバッテリーの劣化が促進されます。ただし、オフィス用途でフルパワーで使用するだけなら問題ありません。今はバッテリー自体に制御回路があり、比較的完成されているので、あまり心配する必要はありません。 1週間に1回は充放電できると良いですね！

2. コンピューターのバッテリーを頻繁に使用しない場合は、バッテリーを取り外すことをお勧めします。もちろん、バッテリーを取り外すときのバッテリー残量が高すぎないこと (完全に充電されたときにマシンから取り外したときと同じです) や、バッテリー残量が低すぎないこと (バッテリーが自己放電します) にも注意する必要があります。）。電力が低い状態で保管すると、自己放電により電圧不足が発生しやすくなり、バッテリーに大きなダメージを与える可能性があります。

3. 良い点はたくさんありますが、科学的な充電方法とは何ですか?まず、バッテリーを使用するときは、充電と放電の深さをできるだけ浅くするようにしてください。つまり、バッテリーの放電深度が浅いほど、バッテリーはより多くの充電を行うことができます。たとえば、バッテリー残量が 90% から 80% に低下した場合、充電します。第二に、バッテリーは過充電にならず、可能な限り約 40% に保つ必要があります。同時に、バッテリー温度が高くなりすぎないようにする必要があります。バッテリー温度が低く、バッテリー電力が約 40% に維持されている場合、1 年以内のバッテリー容量の損失は非常に限られています。逆に、バッテリーが 100% 完全に充電され、非常に高温の環境にある場合、バッテリー容量の損失は非常に明らかです。

もちろん、使用中にそれほど正確に制御することはできませんし、バッテリーを監視するほど多くのエネルギーを費やすことは誰にもできません。したがって、次の点だけを覚えておいてください:

第一: バッテリーを頻繁に使用する場合は、都合の良いときに充電できます。

2 番目: バッテリーを時々使用する場合、定期的にバッテリーを数回放電することができます。

3 番目: バッテリーを頻繁に使用しない場合は、バッテリーの 80% が使用されたらバッテリーをシャットダウンし、バッテリーのプラグを抜き、低温の涼しい場所に保管し、不動態化された電極を活性化するだけで済みます。同時に充電し、次の保管期間での自己放電に必要な電力を供給します。

追伸: リチウム電池にはメモリー効果がありません。現在の電池は独自の制御回路を備えており、通常の使用ではそれほど問題はありません。

要約: 上記の方法が都合が悪い場合は、それを行う必要はありません。結局のところ、ラップトップは好きなように使用でき、通常は提供する必要はありません。、TBはバッテリーを購入できます、そしてそれは数百ドルです

9.ラップトップを維持するにはどうすればよいですか？

ノートパソコンのメンテナンスは必須です。結局のところ、みんなの収入は高くありません。無駄にしたくないですよね？

フィルム、スクリーンフィルム、キーボードフィルム、ケースフィルムを貼ることは決してお勧めしません。物は買った後、壊れるまで使用しないのはあまりにも悲しいことです。もちろんタバコを吸われる方はキーボードカバー等を装着することも可能です！

外観のメンテナンス

通常は、スクリーンクリーナーのボトル、静電気ワイプ、小さなブラシを購入します。出張中、パソコンの電源を入れるとホコリが溜まるのは良くありません。メガネが汚れているのと同じように、スクリーンクリーナーを使うと画面がきれいになります。ケースのパームレストの掃除には、きれいな水と乾いた布を使用できます。通常はアルコール (分析用アルコール) を使用することをお勧めします。小さなキーボードブラシを使用して内部を掃除します。

内部メンテナンス

1年に1回、暑くなる頃にメンテナンスをお勧めします。ファンを清掃し、サーマルペーストを交換する必要があります (Extreme Cooler、7783、または Laird を使用できます)。これには実践ベースが必要です。適切な逆アセンブルチュートリアルをオンラインで見つけることをお勧めします。多くの男の子がやります！場合によっては、ファンに灰の層がないように見えたり、ファンのブレードとラジエーターの間に厚い層がある場合があります。小さな薄い部分を排気口から後方に挿入して、数回突いてみてください。または、光を見て、それを通して見えるかどうかを確認してください。

周辺機器

については、夏には冷却ベースを追加する方がはるかに良いです。費用は数十元だけです。

私は中古のラップトップを販売しているのですが、発送するたびにファンを掃除して放熱グリスと交換しなければなりません。 2、3年使っていて自動的にシャットダウンして、パームレストが熱くなってファンがうるさくなっても、大丈夫！行動を起こす時が来ました。基本的には Computer City で 50 ～ 100 元で実行できます。

私たちのお客様の中には、使い古されたものはあまりありませんが、使用後に廃棄されるものが多すぎます。自分のマシンを大切にすることをお勧めします。

やりたいことをやりたいなら、まず道具を磨かなければなりません！

Xiangyun Laoluo