How to restore the system after changing from win10 to win7? The easiest way to change win10 to win7

How to easily change Win10 system back to Win7? If you cannot enter the system after replacing your Win10 system with Win7, it may be due to unstable data transfer due to the hard disk controller on the motherboard. In order to solve this problem, PHP editor Xigua recommends that you reinstall the system. This article will guide you in detail on how to easily change your Win10 system back to Win7 to help you solve this problem.

The easiest way to change win10 to win7

The motherboard is mainly due to the hard disk controller on the motherboard, which causes unstable data transmission and high error rate, which may result in failure to open. You can check the motherboard manual. Regarding information about CMOS jumpers and clearing CMOS, it should be noted here: You must unplug the main power cord or set the switch of the host power supply to OFF or 0 when clearing CMOS settings.

When hardware replacement or change causes the hardware configuration of the host to change, the computer starts using the POST function after reloading the system, but the system does not recognize the newly added hardware, or Boots based on the old configuration so it will not survive normal power failures. (It can also be newly added hardware compatibility. Solution: Restore the state before the hardware change and check if the system starts normally.

The content of the main boot area is damaged due to a virus or is tampered with. The data is corrupted, or tampered with other programs, which will cause an unopenable crash: the main boot area of ​​the boot hard disk has been destroyed, we can use the FDisk / MBR command to repair, or use the KV3000 disk editing function to find the other 62 sectors 0 face with backup leading guidance area program, restore it to 0 to 0 face 0.

BIOS setting error When the BIOS setting is wrong, the hard disk mode is set to wrong, the memory read and write parameter settings are wrong, etc., no A power failure solution will start: You can try to reconfigure the "PNP/PCI configuration" in the BIOS "Reset Configuration Data" and set the options to "Yes" and "Enabled". You can also set the "Force Update ESCD". Set the BIOS option to "Enabled". You can try these two settings, then exit the store and try to see if it can boot normally.

If the appeal method does not work, you can choose to restart the system. >Recommended download

Shishi Master Installation Master

(https://www.xpwin7.com/soft/39129.html)Installation method

1. After entering the interface, the user can choose to install Windows 7 64-bit system according to the prompts. Note: The gray button means that the current hardware or partition format does not support the installation of this system. >

2. After selecting the system, wait for the PE data and system to be downloaded.

3. After the download is completed, the system will automatically restart.

4. The system automatically restarts and enters the installation interface.

5. After the installation is completed, enter the deployment interface and wait quietly for the system to enter the desktop. It can be used normally.

The above is the detailed content of How to restore the system after changing from win10 to win7? The easiest way to change win10 to win7. For more information, please follow other related articles on the PHP Chinese website!