How to choose the hard disk to boot on HP desktop computer?-Troubleshooting-php.cn

Many users of HP desktop computers often encounter some problems or need some computer skills when using them. For example, some users want to know how to choose the hard disk to start the HP desktop computer? In order to solve this problem, PHP editor Xiaoxin has brought you a detailed tutorial. Let's follow the php editor Xiaoxin to see how to solve it.

How to choose the hard disk to boot on HP desktop computer?

1. How to choose the hard disk to start the HP desktop computer?

For HP desktop computers, press the f1 or f2 key to enter the BIOS system and select the hard disk boot sequence. HP desktop computers generally enter the BIOS system through the f2 sword. Then, we boot in the BIOS. Select the priority boot disk, determine the priority boot disk as the disk where we installed the operating system, save the BIOS, exit and restart, then enter the required hard drive

2. How to choose between two hard drives on a computer? Start first?

Enter the bios settings after booting, you can see the boot device Priority, which is the selection of the boot sequence for the hard disk and other devices. If you have two hard drives, you need to set the priority of the hard drives first.

Enter Hard Disk Drivers and specify the order of the two hard disks. Just move the disk that needs to be started to the top. Can be adjusted using the page keys.

At this time, return to the previous level and enter the boot device Priority. The 1st boot device will be listed, which is the first boot device. In order to ensure that the U disk does not "jump in the queue", Here you need to select the hard drive.

Click OK to complete the operation.

3. How to choose to start HP desktop dual hard drive?

The specific method is as follows:

1. When the computer is turned off, press the power button.

2. Then keep clicking the delete button to enter the motherboard interface.

3. Go to Boot by controlling the left and right arrow keys, and you can see the displayed startup sequence.

4. Then select and enter Hard Disk Drive BBS Priorities.

5. In the options inside, you can see the model display of the hard disk, adjust it to #1.

6. Follow the above steps to set the startup sequence of dual hard drives.

4. How to set HP computer to boot from solid state drive?

When turning on the computer, when the brand logo screen appears, press the BIOS hotkey F12 quickly and continuously.

After entering the bios interface, find the BOOT option.

At the primary master, change the startup item to the solid state drive as the first startup item, and press Enter to confirm.

Press F10 to directly save the settings and exit the BIOS. After the computer automatically restarts, it can boot from the solid state drive.

5. How to set up the hard disk boot on hp 8080?

The specific method for setting the hard disk startup items on HP computers is as follows:

1. After turning on the power, on the HP Logo interface, press the F9 key to enter the BIOS setting interface;

2. After entering the BIOS interface, use the left and right arrow keys to find "system configuration", and then use the up and down arrow keys to select "Boot Options";

3. In Boot Order( Boot Sequence) interface, use the up and down arrow keys to select the method of booting from the hard disk;

4. After using the up and down arrow keys to select the hard disk startup item, press the F10 key and click on the "Exit Saving Changed" that appears. Setup and exit)" Select "Yes" to save and exit. Extended information: Notebook Hard Drive is a hard disk boot Intenal CD/DVD ROM Drive is a CD boot USB Diskette on Key/USB Hard Disk is a USB boot USB CD/DVD ROM Drive is a USB disc boot USB Floppy is a USB floppy drive Network Adapter is a network (card ) startup

6. Computer host hard disk startup setting method

Computer host hard disk startup setting method

In the daily use of computers, sometimes we need to adjust Some settings of the computer host, such as hard disk startup settings. Hard drive boot setup is the process of determining which hard drive your computer loads the operating system and other programs from when it starts. Correctly setting the hard drive boot sequence is critical to the normal operation of your computer. Next, we will introduce the computer host hard disk startup settings method to help you better understand and adjust your computer settings.

Step 1: Enter the BIOS settings

To adjust the hard drive startup settings of the computer host, you first need to enter the computer's BIOS settings interface. Generally, you can enter the BIOS settings by pressing the corresponding key (usually the Delete key, F2 key or F12 key) when turning on the computer. In the BIOS interface, you can adjust the hard disk boot sequence and other related settings.

Step 2: Find the boot order option

After entering the BIOS settings, you need to find the boot order option. This option may be located in a different location depending on your motherboard model and BIOS version. Generally, the boot sequence setting can be found in the "Boot" or "Startup" option of the BIOS settings.

Step 3: Adjust the hard drive boot sequence

After finding the boot sequence option, you can adjust the hard drive boot sequence through the up and down arrow keys. Generally, you can choose to set the primary boot hard drive as the first startup item, so that the computer will load the operating system from this hard drive first when it starts.

Step 4: Save settings and exit BIOS

After adjusting the hard disk startup sequence, please follow the prompts to save settings and exit the BIOS interface. Generally, there is an option to save settings at the bottom of the BIOS setup interface. You can follow the prompts to save the settings and exit the BIOS interface. Afterwards, the computer will start according to the hard drive boot sequence you adjusted.

Notes:

1. Confirm that the changes are correct: Before adjusting the hard disk startup sequence, please be sure to confirm that your changes are correct. Incorrect settings can cause your computer to fail to start or cause other problems. 2. Operate with caution: Be careful when setting up the BIOS interface to ensure that you do not operate by mistake or accidentally change other important settings. 3. Consult the motherboard manual: If you are not sure how to adjust the hard drive boot sequence, it is recommended to consult your motherboard manual or search for relevant information online to ensure that the settings are adjusted correctly.

Through the above steps, you can easily understand and adjust the hard disk startup settings of the computer host. The correct hard disk boot sequence can ensure that the computer runs stably and efficiently. I hope this article will be helpful to you.

7. HP computer does not boot from the hard drive?

Main reason: If the CMOS startup items have not been modified before, it is generally because the hard disk has poor contact or other faults and fails to pass the power-on self-test, or the boot area of the hard disk is damaged, or a non-bootable CD or U disk is inserted into the host.

The specific steps are as follows:

1. Turn off the power and open the case, re-plug and unplug the hard drive power cord and data cable, then turn on the computer, press the DEL key (F2 or other for notebooks) to enter the CMOS BOOT tab to see if the hard drive can be detected. If a usable system USB disk can be detected and booted, use DISKGEN to detect and repair it. If not, replace the connection or hard drive and reinstall the system.

2. Turn on the computer, press the DEL key (F2 or other for laptops) to enter CMOS, find the BOOT tab, and set the hard disk HDD as the first boot item. Press F10 to save and press Y to confirm to exit and restart.

3. If the CD or U disk boot is set in CMOS before the hard disk starts, you need to remove the non-bootable CD or U disk inserted in the optical drive or the host USB interface

8. How to set up two Lenovo hard drives to start?

1. Try to modify the startup sequence of the two hard disks in the BIOS;

2. Remove the old hard disk and reinstall the system on the new hard disk. After the installation is completed, the desktop is displayed, shut down and disconnect. electricity. Then put the second hard drive back into the machine and turn it on again.

3. Under the system, use a third-party tool to try to modify the system boot item information. (Because ghost or PE are sometimes used instead of the regular original image installation method, in most cases the msconfig under the system cannot be set directly.

9. How to set the host to be unable to start the hard disk

How to set up the problem that the host cannot start the hard disk

During the computer maintenance and troubleshooting process, it is a common situation to encounter the problem that the host cannot start the hard disk, and solving such problems requires certain skills and experience. Some common methods and steps to help you solve the problem that the host cannot boot the hard drive

Check the hard drive connection

First of all, when the host cannot boot the hard drive, the first step is to check whether the hard drive is connected. Correct. You can make sure that the hard drive's data and power cables are connected to the motherboard and power supply. Sometimes the hard drive won't boot due to a bad connection or bad contact at the wiring port, so checking the connections is a common way to solve the problem.

Check the status of the hard drive

In addition, you can also check the status of the hard drive by entering the BIOS or using software tools. In the BIOS, you can check whether the hard drive is recognized and set as a boot hard drive. If the hard drive is not recognized or is not set as a boot hard drive, you can make corresponding adjustments and settings.

In addition, you can also use some hard drive detection tools to detect the health status of the hard drive, such as CrystalDiskInfo and other software. With these tools, you can understand the SMART information of the hard drive, bad sectors, etc., and help you determine whether the hard drive is faulty.

Check the hard drive data

When the host cannot start the hard drive, sometimes it is in the hard drive. Caused by data corruption. You can use an external hard drive box or Live CD to connect the hard drive to another computer to check whether the data in the hard drive is intact. If the data is damaged, you can use data recovery software to repair and extract the files. .

Check the motherboard and power supply

Sometimes, the problem that the host cannot start the hard disk may also be caused by the failure of the motherboard or the power supply. You can check whether the power interface on the motherboard is normal and the power cord is normal. Whether the connection is firm. At the same time, you can also check whether the power supply is working properly and whether it can provide enough power to the hard disk. Check the boot order settings of the host. You can check the order of boot devices in the BIOS to ensure that the hard drive is set as the first boot device. Sometimes, incorrect boot order settings will cause the host to fail to boot from the hard drive.

일반적으로 호스트가 하드 디스크를 부팅할 수 없는 문제를 해결하려면 컴퓨터 하드웨어와 소프트웨어에 대한 어느 정도의 이해와 기술이 필요합니다. 단계별 점검 및 문제 해결을 통해 문제의 원인을 찾아 해결할 수 있습니다. 위의 방법과 단계가 호스트가 하드 디스크를 부팅할 수 없는 문제를 효과적으로 해결하는 데 도움이 되기를 바랍니다.

10. Dell 컴퓨터를 시작할 하드 디스크를 선택하는 방법은 무엇입니까?

1. 켜거나 다시 시작하세요. DELL 글꼴 인터페이스에 들어갈 때 F2 키를 눌러 설정 인터페이스로 들어갑니다.

2. 왼쪽에서 일반을 선택하고 Bott Sepuenee 옵션을 찾아 클릭합니다.

3. 그러면 화면 중앙에 5가지 옵션이 나타납니다: 디스켓 드라이브(플로피 디스크 드라이브), 내부 HDD(하드, USB 저장 장치(USB), CD/DVD/CD-RW 드라이브(광학)) 디스크); 온보드 NIC(온보드 네트워크 카드, 내장 네트워크 카드)

4. 시작 항목을 선택하면 오른쪽에 선택한 옵션이 나타나고 화면에 위쪽 및 아래쪽 화살표가 나타납니다. 각 옵션의 오른쪽에 있는 Internal HDD를 클릭한 후 상단의 화살표를 클릭하면 하드디스크에서 부팅할 첫 번째 항목이 설정됩니다.

The above is the detailed content of How to choose the hard disk to boot on HP desktop computer?. For more information, please follow other related articles on the PHP Chinese website!