Disassembly method of ZTE AX3000 Sky Survey Edition

ZTE ax3000 Sky Survey Edition is a high-end wireless router with powerful performance and stable signal, which is favored by the majority of users. But sometimes, users need to disassemble the router to repair or replace parts. So, how to disassemble the ZTE AX3000 Sky Survey Edition?

Step 1: Prepare tools

First, you need to prepare the following tools: screwdriver, plastic card, scissors. These tools can be found in a home repair tool box or a computer repair tool box.

Step 2: Place the router

Place the router and make sure it is in a stable position. Before disassembling, you need to disconnect the power source to avoid electric shock.

Step 3: Disassemble the fuselage

Open the screws on the top of the router and remove the top cover. Use plastic cards to separate the top cover from the bottom panel. During the separation process, attention needs to be paid to keeping the direction of the plastic cards consistent to prevent scratching the circuit board.

Step 4: Remove the antenna

After separating the top cover and bottom plate, remove the antenna and place it to the side.

Step 5: Remove the heat sink

Use a screwdriver to remove the heat sink to gain access to the main circuit board. This step needs to be done carefully as the circuit board is very fragile.

Step 6: Remove the main circuit board

Remove the main circuit board and place it on the workbench. At this point, you can clean the dust and debris inside the router and replace the parts that need to be repaired or replaced.

Step 7: Reassembly

After disassembly, if you need to reassemble, please reverse the above steps and make sure every part is put back and every screw is tightened. Please do not disconnect the wires and antenna cables to avoid affecting the performance of the router.

The above is the detailed content of Disassembly method of ZTE AX3000 Sky Survey Edition. For more information, please follow other related articles on the PHP Chinese website!