Fix Hard Drive Not Detected After Blue Screen Easily Now

The hard drive cannot be recognized after the Blue Screen of Death? This article will provide a concise and effective solution to MiniTool software.

The hard drive cannot be detected after the blue screen of death

Computer Blue Screen of Death (BSOD) can be caused by various hardware and software problems, such as memory failure, device driver corruption, software incompatibility, hard disk corruption, etc. Blue Screen of Death may cause various problems, such as the hard drive cannot be detected after blue Screen of Death, the D disk disappears after blue screen, etc.

This tutorial mainly explores this issue and collects some practical solutions. If you encounter this problem, you can try the following methods one by one.

How to fix hard disk/solid-state drive that cannot be detected after the Blue Screen of Death

Method 1: Reconnect the hard drive to the computer

When encountering the problem of "The hard disk cannot be detected after the blue screen of death", you first need to remove the hard disk from the computer and then reconnect it. Please note that you should replace the M.2 or SATA interface to troubleshoot interface issues.

Method 2: Check whether disks are detected in BIOS

If your hard drive is not displayed in File Explorer or Disk Management, you need to check if it appears in the BIOS. The way to enter the BIOS depends on your computer's make and model, but it is usually done by pressing and holding down the shortcut keys (such as F2, F10, Delete, Esc, etc.) during startup.

If your disk is displayed normally in the BIOS, you can open Device Manager and check for any error messages or warning flags related to the hard disk. If so, you can take appropriate action based on the error.

If the hard disk is displayed in the BIOS but there are some errors, it may mean that the disk is incorrectly connected, the drive is malfunctioning, etc. In this case, you can connect the hard drive to another computer and check if the problem persists.

Method 3: Perform a hard reset

A hard reset of the computer is also worth a try, as it clears memory and shuts down the application completely, preventing software conflicts or failures from affecting disk recognition. Take Dell computers as an example:

Step 1. Turn off the computer and press and hold the power button for 10 seconds.

Step 2. Disconnect the power cord and any external hard disk devices (such as USB drives, printers, etc.) from the computer.

Step 3. Press and hold the power button for 15 to 20 seconds.

Step 4. Connect the computer to the power supply and turn on the device. Now you can check if the disk is displayed.

Method 4: Check whether the power supply is malfunctioning

A problem with the power unit (PSU) may cause the disk to be unrecognized. Therefore, when you encounter the problem of "The hard drive cannot be detected after the blue screen of death", you can consider whether the power supply is malfunctioning. If there is a power error, you may need to purchase a new power unit that suits your computer.

Method 5: Update the BIOS

If there is a hard disk recognition problem with the current BIOS version, you can resolve this issue by updating the BIOS.

Note that BIOS updates are a sensitive operation that may make the system unstable or fail to boot. Therefore, before performing a BIOS update, you need to back up important data.

To update the BIOS, you first need to visit the official website of the computer manufacturer. Then download and install the latest BIOS update according to the official tutorial.

Summarize

In short, the problem of "the hard disk cannot be detected after the blue screen of death" may be caused by improper connection, hard disk failure, power failure, etc. You can try the above troubleshooting steps to resolve this issue.

The above is the detailed content of Fix Hard Drive Not Detected After Blue Screen Easily Now. For more information, please follow other related articles on the PHP Chinese website!