Backend Development
PHP Tutorial
PHP 7 installation and configuration in win10 environment [Tutorial], win10 installation and configuration_PHP tutorial
PHP 7 installation and configuration in win10 environment [Tutorial], win10 installation and configuration_PHP tutorial
Win10 environment PHP 7 installation and configuration [Tutorial], win10 installation configuration
PHP 7 has been out for a while. I was busy with work a few days ago and didn’t have time to study it. I have some time now. Yes, the production environment in the company cannot be upgraded casually. You can still install it on your own computer at home to see the effect.
The following is a brief explanation of the installation of PHP 7 Apache 2.4.
Apache 2.4 installation configuration Installation
Apache 2.4, there is no compiled version for Windows on the official website. You need to go to http://httpd.apache.org/docs/2.4/platform/windows.html to find the mirror website that provides downloading of the Windows compiled version. I use The link is: http://www.apachelounge.com/download/. Download the 32- or 64-bit version as needed. After downloading, it is a zip package. After downloading, unzip the Apace24 directory in the ZIP package to any directory.
Note: Some information of Apache and PHP must match, including 32/64-bit and VC version numbers. For PHP 7, there is only a version compiled with VC14 on the official website, so the corresponding Apache version also needs to be compiled with VC14.
Configuration
Single site configuration
Open the %Apache24%confhttpd.conf file:
1. Find "ServerRoot" and specify it as the directory where %Apache24% is located;
2. Modify the document root directory;
DocumentRoot "E:/wwwpages" <Directory "E:/wwwpages">
3. Add index.php to the index directory
DirectoryIndex index.html index.php
4. Install Apache as a service:
httpd.exe -k install -n "Apache24"
If the service fails to start, modify the port number.
Multi-site configuration (differentiated by port number)
Multiple sites can be configured on one server. This section explains how to configure different sites distinguished by port numbers.
Configure httpd.conf.
First add the listening port (configure several sites and add a few ports):
Listen 8081
Listen 8082
After the above contents are set, you can check whether the port is open through netstat -n -a.
Secondly configure the virtual site:
NameVirtualHost *:8080 <VirtualHost *:8080> ServerName www.mysite1.com #DocumentRoot "C:/Rainman/ProjectWorkspace2.0/SourceCode/Server/wanpush" DocumentRoot "C:/Rainman/ProjectWorkspace3.0_clound/SourceCode" <Directory "C:/Rainman/ProjectWorkspace3.0_clound/SourceCode"> Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> ErrorLog "logs/mysite1.com-error.log" CustomLog "logs/mysite1.com-access.log" common </VirtualHost> NameVirtualHost *:8081 <VirtualHost *:8081> ServerName www.mysite2.com DocumentRoot "C:/Rainman/ProjectWorkspace3.0_clound/yiqixiu" <Directory "C:/Rainman/ProjectWorkspace3.0_clound/yiqixiu"> Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> ErrorLog "logs/mysite2.com-error.log" CustomLog "logs/mysite2.com-access.log" common </VirtualHost>
Mainly configure DocumentRoot and Directory parameters for each virtual site.
Verification
After the installation is complete, write the following HTML page:
<html> <body> <h1>Hello world!</h1> </body> </html>
Save it as index.html and copy the file to "E:/wwwpages".
Open the URL: http://localhost:8080/, and the page displays "Hello world!", which means that the Apache installation is started successfully.
Uninstall service
Uninstall service: httpd –k uninstall –n “apache24”
Note: The name must be consistent with the name during installation.
PHP 7.0.6 installation configuration Installation Download php-7.0.6-Win32-VC14-x64.zip and extract it to any directory.
Configuration 1. Configure Apache
Open the Apache configuration file and add the following content:
LoadModule php7_module "D:/PHPDevEnv/PHP/php7apache2_4.dll" AddType application/x-httpd-php .php AddType application/x-httpd-php .html AddHandler application/x-httpd-php .php PHPIniDir "D:/PHPDevEnv/PHP"
Note: The red part uses the actual path.
2. Configure PHP
Rename php.ini-development in the PHP directory to php.ini, then open the file, search for "extension_dir", remove the previous comment, and change it to absolute Path, for example:
extension_dir = "D:/PHPDevEnv/PHP/ext"
Note: Changing the path to an absolute path is to prevent some PHP extensions from not finding the correct path.
Verification Create a phpinfo.php file in the root directory of the Apache website (see section 2.1 for the specific location):
phpinfo();
?>
Open http://localhost:8080/phpinfo.php.
Hot AI Tools
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Undress AI Tool
Undress images for free
Clothoff.io
AI clothes remover
AI Hentai Generator
Generate AI Hentai for free.
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Hot Topics
System Restore prompts that you must enable system protection on this drive
Jun 19, 2024 pm 12:23 PM
The computer has a restore point, and when the system is restored, it prompts "You must enable system protection on this drive." This usually means that the system protection function is not turned on. System protection is a feature provided by the Windows operating system that can create system restore points to back up system files and settings. That way, if something goes wrong, you can revert to a previous state. When the system fails and you cannot enter the desktop to start it, you can only try the following method: Troubleshooting-Advanced Options-Command Prompt Command 1 netstartvssrstrui.exe/offline:C:\windows=active Command 2 cd%windir%\system32 \configrenSYSTEMsy
What should I do if win10 does not switch users? Win10 login interface does not have the option to switch users. Solution
Jun 25, 2024 pm 05:21 PM
A problem that Windows 10 users may encounter is that they cannot find the switch user option on the login interface. So what should I do if there is no switch user option on the win10 login interface? Let this site give users a detailed explanation of the problem of not switching user options in the win10 login interface. Detailed solution to the problem of switching user options on the Win10 login interface: Check user account settings: First, make sure you have multiple user accounts on your computer and that these accounts are enabled. You can check and enable the account by following these steps: a. Press Win+I keys to open Settings and select "Accounts". b. Select "Family & Others" or &ld in the left navigation bar
How to permanently turn off real-time protection in win10? How to disable real-time protection function in win10 computer 0
Jun 05, 2024 pm 09:46 PM
Although the comprehensive anti-virus software that comes with Windows 10 system can continuously protect the security of your personal computer, sometimes it may also affect certain downloaded files. For some users, it may be more appropriate to temporarily turn off the real-time protection function. But many users don’t know how to permanently turn off the real-time protection feature on win10 system. 1. First, press the "Win+R" keys to open the run window, enter the "gpedit.msc" command to open the local Group Policy Editor interface; 2. Then, in the opened interface, click "Computer Configuration/Administrative Templates/ Windows Components/MicrosoftDef
How to restore the default wallpaper in win10? One trick to quickly restore the default wallpaper in Windows 10 system
Jun 02, 2024 pm 02:07 PM
In Windows 10 system, if you want to return to the system default wallpaper, you can follow the following steps: 1. Right-click a blank space on the desktop and select Personalize in the pop-up menu. 2. This will open the Personalization window in Settings. In the left menu, click Background. 3. Under the "Background" settings, find and click the drop-down menu next to "Choosepicture", and then select Windows Default (Windows Default) or directly select a picture that looks like the default wallpaper in the picture preview below ( if there are multiple options). 4. If your system has multiple versions
What should I do if Win10 takes a screenshot and crashes? How to solve the problem of Win10 flashing and then disappearing after taking a screenshot?
Jun 02, 2024 pm 12:48 PM
There are many reasons why the screenshot disappears after taking a screenshot in Win10. Users can first check the screenshot save location or adjust the screenshot settings, or check the animation effect to check it. If it really doesn't work, you can also choose to update the driver and operating system to perform the operation. Let this website carefully introduce to users the analysis of the problem of Win10 disappearing after taking a screenshot. Analysis of the problem after win10 takes a picture and it flashes and disappears 1. Check where the screenshot is saved: When you use the Win+PrtSc (PrintScreen) key combination to take a screenshot, the screenshot is usually saved in the C:\Users\YourUsername\Pictures\Screenshots folder. please
Windows cannot start the Windows Audio service Error 0x80070005
Jun 19, 2024 pm 01:08 PM
The guy's computer appears: Windows cannot start the WindowsAudio service (located on the local computer). Error 0x8007005: Access denied. This situation is usually caused by user permissions. You can try the following methods to fix it. Method 1: Modify the registry to add permissions through batch processing, create a new text document on the desktop, save it as .bat, and right-click the administrator to go far. Echo==========================EchoProcessingRegistryPermission.Pleasewait...Echo================== ========subinacl/subkey
What to do if the Win10 Task Manager crashes? How to fix the Win10 Task Manager crash?
Jun 25, 2024 pm 04:31 PM
Hello everyone, have you ever encountered the situation where the Windows 10 Task Manager keeps crashing? This function helps us a lot, allowing us to quickly see all running tasks, which is very convenient to use, right? However, some friends said that they encountered this problem and didn’t know how to solve it, so let me share with you the specific solution! Solution to Win10 Task Manager crash 1. First, press and hold the "Win" + "R" keys on the keyboard to open Run, enter "regedit" and press the Enter key. 2. Expand the folders and find "HKEY_CURRENT_USERSoftwareMicros
What should I do if there are no pop-up reminders for calendar events in Win10? How to recover if calendar event reminders are gone in Win10
Jun 09, 2024 pm 02:52 PM
The calendar can help users record your schedule and even set reminders. However, many users are asking what to do if calendar event reminders do not pop up in Windows 10? Users can first check the Windows update status or clear the Windows App Store cache to perform the operation. Let this site carefully introduce to users the analysis of the problem of Win10 calendar event reminder not popping up. To add calendar events, click the "Calendar" program in the system menu. Click the left mouse button on a date in the calendar. Enter the event name and reminder time in the editing window, and click the "Save" button to add the event. Solving the problem of win10 calendar event reminder not popping up
