YII module implements the method of binding second-level domain name, yii second-level domain name

YII module implements the method of binding second-level domain name, yii second-level domain name_PHP tutorial

WBOY

Release： 2016-07-13 10:23:19

Original

1099 people have browsed it

YII module implements the method of binding second-level domain name, yii second-level domain name

The YII module implements the following steps to bind a second-level domain name:

First set in the configuration file:

'urlManager' => array(
'urlFormat' => 'path',
'showScriptName' => false, //注意false不要用引号括上
'urlSuffix' => '.html',
'rules' => array(
'http://test.jb51.net'=>array('/blog', 'urlSuffix'=>”, 'caseSensitive'=>false),
),

Copy after login

Blog is a module. If there is a second controller under the blog module (take comment as an example here), you need to write one more rule, as follows:

'urlManager' => array(
'urlFormat' => 'path',
'showScriptName' => false, //注意false不要用引号括上
'urlSuffix' => '.html',
'rules' => array(
'http://test.jb51.net'=>array('/blog', 'urlSuffix'=>”, 'caseSensitive'=>false),
'http://test.jb51.net/comment-<id:\w+>'=>array('/blog/comment/', 'urlSuffix'=>'.html', 'caseSensitive'=>false),
),

Copy after login

If you want to access a comment under the blog, the URL will be: http://test.jb51.net/comment-1.html

The situation of this local server:

1. Setting it in the YII configuration is not enough. You also need to resolve the test.jb51.net secondary domain name to the program server in the DNS server. You can add

at the end of hosts.

127.0.0.1    www.jb51.net   test.jb51.net

Copy after login

2. You also need to add:

to the http.conf of the apache server

NameVirtualHost *:80
<VirtualHost *:80>
ServerAdmin kane@jb51.net
DocumentRoot E:/wamp/www/k1029
ServerName test.jb51.net
ErrorLog logs/test.jb51.net-error_log
CustomLog logs/test.jb51.net-access_log common
</VirtualHost>

Copy after login

If you need to bind multiple second-level domain names, just add them repeatedly.

Second-level domain name binding issue

Consult your hosting provider. Some hosts do not support subdomain binding. Another way is to check whether the settings in your program are correct! For these two reasons!
Normally speaking, the requirements you mentioned can be achieved! I hope it will be helpful to your question. If you still have any questions, you can consult HI online. The IT Elite Club will sincerely answer your questions!
Wu Fudong [authoritative expert]

How to configure the second-level domain name in yii framework

You can ferry this over