Home php教程 PHP开发 Apache VirtualHost configuration

Apache VirtualHost configuration

Dec 21, 2016 am 11:06 AM

Take the lampp environment as an example. Other environments only have different paths to the configuration files.

First, remove the comment on the virtual path in lampp/etc/httpd.conf (this is the general configuration file of Apache).

#Include etc/extra/httpd-vhosts.conf

Enable the httpd-vhosts.conf file, or write the configuration directly in httpd.conf, but it is not recommended.

Relevant configurations include: Listen NameVirtualHost

1. Listen The port to be listened to, multiple ports, multiple Listens must be written; otherwise, when Apache starts, the corresponding socket will not be started.

For example

              Listen 80

              Listen 8080

2. NameVirtualHost Without this, the tag has no effect.

(Thanks to okiwill for the correction. This specifically refers to access based on domain name. If access is based on IP, the VirtualHost of the first specified IP shall prevail. Each IP can be specified separately)

One NameVirtualHost can be used with multiple , each must have its own NameVirtualHost (I guess)

NameVirutalHost *:80

Specify the IP and port of this host. If there are multiple IPs on the server, you can specify a certain Which host is a certain port of the IP?

 (The new version of Apache has removed the NameVirtualHost configuration, because it is really useless, the parameters have been specified in VirtualHost)

3 The most critical VirtualHost

Important: When Apache receives a request, it will first default to the first one VirtualHost, and then find a matching one. If there is no matching one, the first VirtualHost will take effect.

Therefore, in httpd.conf, the permissions of (this is the default configuration for all directories)

and are both denied from all. as the default.

So, my first VirtualHost is

ServerName *

DocumentRoot

Order deny,allow

Allow from all

After

, just add them in order

ServerName www .myweb1.com

DocumentRoot

Order deny,allow

Allow from all

The above is the content of Apache VirtualHost configuration. For more related content, please pay attention to the PHP Chinese website (www.php.cn)!


Statement of this Website
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn

Hot AI Tools

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Undress AI Tool

Undress AI Tool

Undress images for free

Clothoff.io

Clothoff.io

AI clothes remover

Video Face Swap

Video Face Swap

Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Tools

Notepad++7.3.1

Notepad++7.3.1

Easy-to-use and free code editor

SublimeText3 Chinese version

SublimeText3 Chinese version

Chinese version, very easy to use

Zend Studio 13.0.1

Zend Studio 13.0.1

Powerful PHP integrated development environment

Dreamweaver CS6

Dreamweaver CS6

Visual web development tools

SublimeText3 Mac version

SublimeText3 Mac version

God-level code editing software (SublimeText3)

How to set the cgi directory in apache How to set the cgi directory in apache Apr 13, 2025 pm 01:18 PM

To set up a CGI directory in Apache, you need to perform the following steps: Create a CGI directory such as "cgi-bin", and grant Apache write permissions. Add the "ScriptAlias" directive block in the Apache configuration file to map the CGI directory to the "/cgi-bin" URL. Restart Apache.

How to start apache How to start apache Apr 13, 2025 pm 01:06 PM

The steps to start Apache are as follows: Install Apache (command: sudo apt-get install apache2 or download it from the official website) Start Apache (Linux: sudo systemctl start apache2; Windows: Right-click the "Apache2.4" service and select "Start") Check whether it has been started (Linux: sudo systemctl status apache2; Windows: Check the status of the "Apache2.4" service in the service manager) Enable boot automatically (optional, Linux: sudo systemctl

How to delete more than server names of apache How to delete more than server names of apache Apr 13, 2025 pm 01:09 PM

To delete an extra ServerName directive from Apache, you can take the following steps: Identify and delete the extra ServerName directive. Restart Apache to make the changes take effect. Check the configuration file to verify changes. Test the server to make sure the problem is resolved.

How to use Debian Apache logs to improve website performance How to use Debian Apache logs to improve website performance Apr 12, 2025 pm 11:36 PM

This article will explain how to improve website performance by analyzing Apache logs under the Debian system. 1. Log Analysis Basics Apache log records the detailed information of all HTTP requests, including IP address, timestamp, request URL, HTTP method and response code. In Debian systems, these logs are usually located in the /var/log/apache2/access.log and /var/log/apache2/error.log directories. Understanding the log structure is the first step in effective analysis. 2. Log analysis tool You can use a variety of tools to analyze Apache logs: Command line tools: grep, awk, sed and other command line tools.

How to check Debian OpenSSL configuration How to check Debian OpenSSL configuration Apr 12, 2025 pm 11:57 PM

This article introduces several methods to check the OpenSSL configuration of the Debian system to help you quickly grasp the security status of the system. 1. Confirm the OpenSSL version First, verify whether OpenSSL has been installed and version information. Enter the following command in the terminal: If opensslversion is not installed, the system will prompt an error. 2. View the configuration file. The main configuration file of OpenSSL is usually located in /etc/ssl/openssl.cnf. You can use a text editor (such as nano) to view: sudonano/etc/ssl/openssl.cnf This file contains important configuration information such as key, certificate path, and encryption algorithm. 3. Utilize OPE

How to view your apache version How to view your apache version Apr 13, 2025 pm 01:15 PM

There are 3 ways to view the version on the Apache server: via the command line (apachectl -v or apache2ctl -v), check the server status page (http://<server IP or domain name>/server-status), or view the Apache configuration file (ServerVersion: Apache/<version number>).

How to connect to the database of apache How to connect to the database of apache Apr 13, 2025 pm 01:03 PM

Apache connects to a database requires the following steps: Install the database driver. Configure the web.xml file to create a connection pool. Create a JDBC data source and specify the connection settings. Use the JDBC API to access the database from Java code, including getting connections, creating statements, binding parameters, executing queries or updates, and processing results.

What to do if the apache80 port is occupied What to do if the apache80 port is occupied Apr 13, 2025 pm 01:24 PM

When the Apache 80 port is occupied, the solution is as follows: find out the process that occupies the port and close it. Check the firewall settings to make sure Apache is not blocked. If the above method does not work, please reconfigure Apache to use a different port. Restart the Apache service.

See all articles