Analysis of synchronized in Java concurrency-javaTutorial-php.cn

Java Programming Language

Java is an object-oriented programming language that can write cross-platform application software. It is a Java programming language and Java platform launched by Sun Microsystems in May 1995. (That is, the general name of JavaEE(j2ee), JavaME(j2me), JavaSE(j2se)).

There is not much analysis of synchronzied in the JDK, mainly for synchronization. Let's analyze the source code of synchronizer.cpp in jvm

You can download the jvm source code here: http://hg.openjdk.java.net/

The directory of synchronzier.cpp is in: hotspot-9646293b9637\src\share\vm\runtime

synchronized synchronization bottom layer uses JNI to call ObjectMonitor to implement thread wait(), notify(), notifyAll(), etc.
Look at the hotspot source code below (Written in C++) Just take a quick look at it.

wait()

// NOTE: must use heavy weight monitor to handle wait()
void ObjectSynchronizer::wait(Handle obj, jlong millis, TRAPS) {
  if (UseBiasedLocking) {
    BiasedLocking::revoke_and_rebias(obj, false, THREAD);
    assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
  }
  if (millis < 0) {//时间小于0会抛出异常
    TEVENT (wait - throw IAX) ;
    THROW_MSG(vmSymbols::java_lang_IllegalArgumentException(), "timeout value is negative");
  }
  ObjectMonitor* monitor = ObjectSynchronizer::inflate(THREAD, obj());
  DTRACE_MONITOR_WAIT_PROBE(monitor, obj(), THREAD, millis);

  //调用了ObjectMonitor中的wait
  monitor->wait(millis, true, THREAD);

  /* This dummy call is in place to get around dtrace bug 6254741.  Once
     that&#39;s fixed we can uncomment the following line and remove the call */
  // DTRACE_MONITOR_PROBE(waited, monitor, obj(), THREAD);
  dtrace_waited_probe(monitor, obj, THREAD);
}</span>

Copy after login

ObjectMonitor::wait()

// Note: a subset of changes to ObjectMonitor::wait()
// will need to be replicated in complete_exit above
void ObjectMonitor::wait(jlong millis, bool interruptible, TRAPS) {
   Thread * const Self = THREAD ;
   assert(Self->is_Java_thread(), "Must be Java thread!");
   JavaThread *jt = (JavaThread *)THREAD;

   DeferredInitialize () ;

   // Throw IMSX or IEX.
   CHECK_OWNER();

   // check for a pending interrupt 是否有中断信号
   if (interruptible && Thread::is_interrupted(Self, true) && !HAS_PENDING_EXCEPTION) {
     // post monitor waited event.  Note that this is past-tense, we are done waiting.
     if (JvmtiExport::should_post_monitor_waited()) {
        // Note: &#39;false&#39; parameter is passed here because the
        // wait was not timed out due to thread interrupt.
        JvmtiExport::post_monitor_waited(jt, this, false);
     }
     TEVENT (Wait - Throw IEX) ;
     THROW(vmSymbols::java_lang_InterruptedException());
     return ;
   }
   TEVENT (Wait) ;

   assert (Self->_Stalled == 0, "invariant") ;
   Self->_Stalled = intptr_t(this) ;
   //设置线程的监视锁
   jt->set_current_waiting_monitor(this);

   // create a node to be put into the queue
   // Critically, after we reset() the event but prior to park(), we must check
   // for a pending interrupt.
   //添加一个节点放入到等待队列中
   ObjectWaiter node(Self);
   node.TState = ObjectWaiter::TS_WAIT ;
   Self->_ParkEvent->reset() ;
   OrderAccess::fence();          // ST into Event; membar ; LD interrupted-flag

   // Enter the waiting queue, which is a circular doubly linked list in this case
   // but it could be a priority queue or any data structure.
   // _WaitSetLock protects the wait queue.  Normally the wait queue is accessed only
   // by the the owner of the monitor *except* in the case where park()
   // returns because of a timeout of interrupt.  Contention is exceptionally rare
   // so we use a simple spin-lock instead of a heavier-weight blocking lock.
   //添加元素c++使用同步的方式，获取锁
   Thread::SpinAcquire (&_WaitSetLock, "WaitSet - add") ;
   //添加节点
   AddWaiter (&node) ;
   //释放锁
   Thread::SpinRelease (&_WaitSetLock) ;

   if ((SyncFlags & 4) == 0) {
      _Responsible = NULL ;
   }
   intptr_t save = _recursions; // record the old recursion count
   //增加等待线程数
   _waiters++;                  // increment the number of waiters
   _recursions = 0;             // set the recursion level to be 1
   exit (Self) ;                    // exit the monitor
   guarantee (_owner != Self, "invariant") ;

   // As soon as the ObjectMonitor&#39;s ownership is dropped in the exit()
   // call above, another thread can enter() the ObjectMonitor, do the
   // notify(), and exit() the ObjectMonitor. If the other thread&#39;s
   // exit() call chooses this thread as the successor and the unpark()
   // call happens to occur while this thread is posting a
   // MONITOR_CONTENDED_EXIT event, then we run the risk of the event
   // handler using RawMonitors and consuming the unpark().
   //
   // To avoid the problem, we re-post the event. This does no harm
   // even if the original unpark() was not consumed because we are the
   // chosen successor for this monitor.
   if (node._notified != 0 && _succ == Self) {
      node._event->unpark();
   }

   // The thread is on the WaitSet list - now park() it.
   // On MP systems it&#39;s conceivable that a brief spin before we park
   // could be profitable.
   //
   // TODO-FIXME: change the following logic to a loop of the form
   //   while (!timeout && !interrupted && _notified == 0) park()

   int ret = OS_OK ;
   int WasNotified = 0 ;
   { // State transition wrappers
     OSThread* osthread = Self->osthread();
     OSThreadWaitState osts(osthread, true);
     {
       ThreadBlockInVM tbivm(jt);
       // Thread is in thread_blocked state and oop access is unsafe.
       jt->set_suspend_equivalent();

       if (interruptible && (Thread::is_interrupted(THREAD, false) || HAS_PENDING_EXCEPTION)) {
           // Intentionally empty
       } else
       if (node._notified == 0) {
         if (millis <= 0) {
            Self->_ParkEvent->park () ;
         } else {
            ret = Self->_ParkEvent->park (millis) ;
         }
       }

       // were we externally suspended while we were waiting?
       if (ExitSuspendEquivalent (jt)) {
          // TODO-FIXME: add -- if succ == Self then succ = null.
          jt->java_suspend_self();
       }

     } // Exit thread safepoint: transition _thread_blocked -> _thread_in_vm


     // Node may be on the WaitSet, the EntryList (or cxq), or in transition
     // from the WaitSet to the EntryList.
     // See if we need to remove Node from the WaitSet.
     // We use double-checked locking to avoid grabbing _WaitSetLock
     // if the thread is not on the wait queue.
     //
     // Note that we don&#39;t need a fence before the fetch of TState.
     // In the worst case we&#39;ll fetch a old-stale value of TS_WAIT previously
     // written by the is thread. (perhaps the fetch might even be satisfied
     // by a look-aside into the processor&#39;s own store buffer, although given
     // the length of the code path between the prior ST and this load that&#39;s
     // highly unlikely).  If the following LD fetches a stale TS_WAIT value
     // then we&#39;ll acquire the lock and then re-fetch a fresh TState value.
     // That is, we fail toward safety.

     if (node.TState == ObjectWaiter::TS_WAIT) {
         Thread::SpinAcquire (&_WaitSetLock, "WaitSet - unlink") ;
         if (node.TState == ObjectWaiter::TS_WAIT) {
            DequeueSpecificWaiter (&node) ;       // unlink from WaitSet
            assert(node._notified == 0, "invariant");
            node.TState = ObjectWaiter::TS_RUN ;
         }
         Thread::SpinRelease (&_WaitSetLock) ;
     }

     // The thread is now either on off-list (TS_RUN),
     // on the EntryList (TS_ENTER), or on the cxq (TS_CXQ).
     // The Node&#39;s TState variable is stable from the perspective of this thread.
     // No other threads will asynchronously modify TState.
     guarantee (node.TState != ObjectWaiter::TS_WAIT, "invariant") ;
     OrderAccess::loadload() ;
     if (_succ == Self) _succ = NULL ;
     WasNotified = node._notified ;

     // Reentry phase -- reacquire the monitor.
     // re-enter contended monitor after object.wait().
     // retain OBJECT_WAIT state until re-enter successfully completes
     // Thread state is thread_in_vm and oop access is again safe,
     // although the raw address of the object may have changed.
     // (Don&#39;t cache naked oops over safepoints, of course).

     // post monitor waited event. Note that this is past-tense, we are done waiting.
     if (JvmtiExport::should_post_monitor_waited()) {
       JvmtiExport::post_monitor_waited(jt, this, ret == OS_TIMEOUT);
     }
     OrderAccess::fence() ;

     assert (Self->_Stalled != 0, "invariant") ;
     Self->_Stalled = 0 ;

     assert (_owner != Self, "invariant") ;
     ObjectWaiter::TStates v = node.TState ;
     if (v == ObjectWaiter::TS_RUN) {
         enter (Self) ;
     } else {
         guarantee (v == ObjectWaiter::TS_ENTER || v == ObjectWaiter::TS_CXQ, "invariant") ;
         ReenterI (Self, &node) ;
         node.wait_reenter_end(this);
     }

     // Self has reacquired the lock.
     // Lifecycle - the node representing Self must not appear on any queues.
     // Node is about to go out-of-scope, but even if it were immortal we wouldn&#39;t
     // want residual elements associated with this thread left on any lists.
     guarantee (node.TState == ObjectWaiter::TS_RUN, "invariant") ;
     assert    (_owner == Self, "invariant") ;
     assert    (_succ != Self , "invariant") ;
   } // OSThreadWaitState()

   jt->set_current_waiting_monitor(NULL);

   guarantee (_recursions == 0, "invariant") ;
   _recursions = save;     // restore the old recursion count
   _waiters--;             // decrement the number of waiters

   // Verify a few postconditions
   assert (_owner == Self       , "invariant") ;
   assert (_succ  != Self       , "invariant") ;
   assert (((oop)(object()))->mark() == markOopDesc::encode(this), "invariant") ;

   if (SyncFlags & 32) {
      OrderAccess::fence() ;
   }

   // check if the notification happened
   if (!WasNotified) {
     // no, it could be timeout or Thread.interrupt() or both
     // check for interrupt event, otherwise it is timeout
     if (interruptible && Thread::is_interrupted(Self, true) && !HAS_PENDING_EXCEPTION) {
       TEVENT (Wait - throw IEX from epilog) ;
       THROW(vmSymbols::java_lang_InterruptedException());
     }
   }

   // NOTE: Spurious wake up will be consider as timeout.
   // Monitor notify has precedence over thread interrupt.
}</span>

Copy after login

ObjectMonitor::notify()

void ObjectMonitor::notify(TRAPS) {
  CHECK_OWNER();
  if (_WaitSet == NULL) {
     TEVENT (Empty-Notify) ;
     return ;
  }
  DTRACE_MONITOR_PROBE(notify, this, object(), THREAD);

  int Policy = Knob_MoveNotifyee ;

  Thread::SpinAcquire (&_WaitSetLock, "WaitSet - notify") ;
  ObjectWaiter * iterator = DequeueWaiter() ;
  // ...
  //省略中间代码
  //...
        ParkEvent * ev = iterator->_event ;
        //设置状态
        iterator->TState = ObjectWaiter::TS_RUN ;
        OrderAccess::fence() ;
        //释放锁
        ev->unpark() ;
     }

     if (Policy < 4) {
       iterator->wait_reenter_begin(this);
     }
  }</span>

Copy after login

There are also notifyAll(), SimpleEnter(), SimpeExit(), you can see the specific code.

The above is the content of synchronized analysis of Java concurrency. For more related content, please pay attention to the PHP Chinese website (www.php.cn)!