How to install php on linux

In this article we mainly share with you how to install php on Linux. This article is shared with you in the form of pictures and texts, hoping to help you.

1. Download the corresponding version from the php official website

Because the php download page only has the latest few version, the downloaded older version can no longer be found on the download page. You can only download it manually through the following URL,

http://cn.php.net/distributions/ php-5.3.9.tar.bz2, some old versions will be listed on this page. The 5.3 version is used here, and the download is in gz format

2. Install php

Unzip the tar package and enter the unzipped package directory - execute the command: ./configure --prefix=/opt/local/ php, "/opt/local/php" is the installation path, you can change it to the installation path you want.

(1) There may be a prompt here that some necessary plug-ins are missing. In this case, use the yum command to install it. For example, the most likely error is: configure error xml2-config not found. please Check your libxml2 installation, then execute the command: yum -y install libxml2 libxml2-devel, install the corresponding plug-in, and so on

After all plug-ins are installed, execute again

<span style="font-size: 14px;">./configure --prefix=/opt/local/php<br/></span>

(2) If you want to install the php-fpm function here, you need to install more plug-ins with yum, for example:

<span style="font-size: 14px;">yum -y install openssl openssl-devel bzip2 bzip2-devel curl curl-devel readline-devel fcgi php-mcrypt libmcrypt libmcrypt-devel<br/></span>

In which installphp-mcrypt When libmcrypt libmcrypt-devel, you may be prompted that the package cannot be found. In this case, you need to update the source to solve the problem. The specific command is as follows:

<span style="font-size: 14px;">yum -y install epel-release<br/>yum update<br/></span>

Among them, update was executed twice before it was successful, and then configure was executed again

./configure --prefix=/opt/local/php5.3.29 --with-config-file-path=/etc --enable-inline-optimization --disable-debug --disable-rpath --enable-shared --enable-opcache --enable-fpm --with-fpm-user=www --with-fpm-group=www --with-mysql=mysqlnd --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --with-gettext --enable-mbstring --with-iconv --with-mcrypt --with-mhash --with-openssl --enable-bcmath --enable-soap --with-libxml-dir --enable-pcntl --enable-shmop --enable-sysvmsg --enable-sysvsem --enable-sysvshm --enable-sockets --with-curl --with-zlib --enable-zip --with-bz2 --with-readline --without-sqlite3 --without-pdo-sqlite --with-pear

通过后执行make

此时可能会出现以下提示

PEAR package PHP_Archive not installed: generated phar will require PHP's phar extension be enabled.

此处可暂进忽略，等之后再行安装，再次在php目录执行make all install

如果安装了php-fpm，则还需要执行以下命令，将php/etc目录下的配置文件拷贝一份

cp etc/php-fpm.conf.default etc/php-fpm.conf

将php/lib/php.ini拷贝到/etc/下

3.初装phar

这时可以执行

<span style="font-size: 14px;">wget http://pear.php.net/go-pear.phar<br/></span>

之后再执行

/opt/local/php/bin/php /opt/local/go-pear.phar

在出现的提示后，选1，选择phar安装目录，然后一路回车进行安装即可

最后制作php软链，让php全局可用

<span style="font-size: 14px;">ln -s /opt/local/php/bin/php /usr/bin/php<br/></span>

4.验证

执行php -v和sbin/php-fpm -v查看php版本以验证php是否已安装

5.启动php-fpm

php/sbin/php-fpm

INT, TERM 立刻终止

QUIT 平滑终止

USR1 重新打开日志文件

USR2 平滑重载所有worker进程并重新载入配置和二进制模块

示例：

php-fpm 关闭：

kill -INT `cat /opt/local/php/var/run/php-fpm.pid`

php-fpm 重启：

kill -USR2 `cat /opt/local/php/var/run/php-fpm.pid`

如果找不到php-fpm.pid文件，可通过查找php-fpm进程号进行重启和关闭

例如

<span style="font-size: 14px;">[root@SH-DEV local]# ps -aux|grep php-fpm<br/>root     141735  0.0  0.0 201840  3892 ?       <br/> Ss   16:27   0:00 php-fpm: master process (/opt/local/php5.3.29/etc/php-fpm.conf)<br/><br/>kill -USR2 141735<br/></span>

6.修改php-fpm配置

（1）如果在nginx.conf中使用了fastcgi_pass unix:/tmp/php-cgi.sock，则需要修改php-fpm.conf，找到如下码段：

<span style="font-size: 14px;">; The address on which to accept FastCGI requests.<br/>; Valid syntaxes are:<br/>;   &#39;ip.add.re.ss:port&#39;    - to listen on a TCP socket to a specific address on<br/>;                            a specific port;<br/>;   &#39;port&#39;                 - to listen on a TCP socket to all addresses on a<br/>;                            specific port;<br/>;   &#39;/path/to/unix/socket&#39; - to listen on a unix socket.<br/>; Note: This value is mandatory.<br/>;listen = 127.0.0.1:9000<br/>listen = /tmp/php-cgi.sock<br/><br/>; Set listen(2) backlog. A value of &#39;-1&#39; means unlimited.<br/>; Default Value: 128 (-1 on FreeBSD and OpenBSD)<br/>;listen.backlog = -1<br/><br/>; Set permissions for unix socket, if one is used. In Linux, read/write<br/>; permissions must be set in order to allow connections from a web server. Many<br/>; BSD-derived systems allow connections regardless of permissions.<br/>; Default Values: user and group are set as the running user<br/>;                 mode is set to 0660<br/>listen.owner = nobody<br/>listen.group = nobody<br/>listen.mode = 0660<br/></span>

将原listen和listen.owner，listen.group段做如上修改，其中listen.owner，listen.group为nginx启动用户名，如此处不修改，会提示

nginx error connect to php-fpm.sock failed (13: Permission denied)

当然此处如果将sock放在内存中/dev/shm/php-fpm.sock会更快

（2）修改php-fpm线程数

<span style="font-size: 14px;">; Per pool prefix<br/>; It only applies on the following directives:<br/>; - &#39;slowlog&#39;<br/>; - &#39;listen&#39; (unixsocket)<br/>; - &#39;chroot&#39;<br/>; - &#39;chdir&#39;<br/>; - &#39;php_values&#39;<br/>; - &#39;php_admin_values&#39;<br/>;   dynamic - the number of child processes are set dynamically based on the<br/>;             following directives. With this process management, there will be<br/>;             always at least 1 children.<br/>;             pm.max_children      - the maximum number of children that can<br/>;                                    be alive at the same time.<br/>;             pm.start_servers     - the number of children created on startup.<br/>;             pm.min_spare_servers - the minimum number of children in &#39;idle&#39;<br/>;                                    state (waiting to process). If the number<br/>;                                    of &#39;idle&#39; processes is less than this<br/>;                                    number then some children will be created.<br/>;             pm.max_spare_servers - the maximum number of children in &#39;idle&#39;<br/>;                                    state (waiting to process). If the number<br/>;                                    of &#39;idle&#39; processes is greater than this<br/>;                                    number then some children will be killed.<br/>;  ondemand - no children are created at startup. Children will be forked when<br/>;             new requests will connect. The following parameter are used:<br/>;             pm.max_children           - the maximum number of children that<br/>;                                         can be alive at the same time.<br/>;             pm.process_idle_timeout   - The number of seconds after which<br/>;                                         an idle process will be killed.<br/>; Note: This value is mandatory.<br/>pm = dynamic<br/>#如何控制子进程，选项有static和dynamic。如果选择static，则由pm.max_children指定固定的子进程数。如果选择dynamic，则由下面的参数决定<br/><br/>; The number of child processes to be created when pm is set to &#39;static&#39; and the<br/>; maximum number of child processes when pm is set to &#39;dynamic&#39; or &#39;ondemand&#39;.<br/>; This value sets the limit on the number of simultaneous requests that will be<br/>; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.<br/>; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP<br/>; CGI. The below defaults are based on a server without much resources. Don&#39;t<br/>; forget to tweak pm.* to fit your needs.<br/>; Note: Used when pm is set to &#39;static&#39;, &#39;dynamic&#39; or &#39;ondemand&#39;<br/>; Note: This value is mandatory.<br/>pm.max_children = 8<br/>#子进程最大数<br/><br/>; The number of child processes created on startup.<br/>; Note: Used only when pm is set to &#39;dynamic&#39;<br/>; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2<br/>pm.start_servers = 8<br/>#启动时的进程数<br/><br/><br/>; The desired minimum number of idle server processes.<br/>; Note: Used only when pm is set to &#39;dynamic&#39;<br/>; Note: Mandatory when pm is set to &#39;dynamic&#39;<br/>pm.min_spare_servers = 1<br/>#保证空闲进程数最小值，如果空闲进程小于此值，则创建新的子进程<br/><br/>; The desired maximum number of idle server processes.<br/>; Note: Used only when pm is set to &#39;dynamic&#39;<br/>; Note: Mandatory when pm is set to &#39;dynamic&#39;<br/>pm.max_spare_servers = 8<br/>#保证空闲进程数最大值，如果空闲进程大于此值，此进行清理<br/></span>

相关推荐：

Linux上安装php-mysqlnd扩展实例

mac安装php开发环境方法实例分享

最详细的linux安装php过程

The above is the detailed content of How to install php on linux. For more information, please follow other related articles on the PHP Chinese website!