Home > Backend Development > PHP Tutorial > PHP implements the idea and specific implementation of sending text messages through the serial port

PHP implements the idea and specific implementation of sending text messages through the serial port

墨辰丷
Release: 2023-03-31 06:08:02
Original
2113 people have browsed it

This article mainly introduces the idea and specific implementation of sending text messages through php through the serial port. Interested friends can refer to it. I hope it will be helpful to everyone.

With the advancement of technology, three modes have emerged in the field of text message sending and receiving in time: BLOCK MODE, TEXT MODE based on AT commands, and PDU MODE based on AT commands. Among them, TEXT MODE is relatively simple, and many Nokia mobile phones support this mode. Most Siemens mobile phones only support PDU MODE. PDU mode is a method of sending and receiving text messages. The text of the text message is transmitted after hexadecimal encoding. Currently, PDU has replaced BLOCK MODE.

SMS is a specification developed by Etsi (GSM 03.40 and GSM 03.38). When using 7-bits encoding, it can send up to 160 characters; but with 8-bit encoding, it can send up to 140 characters, which usually cannot be displayed directly through the mobile phone; and when using 16-bit encoding, up to 70 characters, Used to display Unicode (UCS2) text information, which can be displayed by most mobile phones.

What we are discussing today is PDU MODE, UCS2 encoding, which means that a maximum of 70 characters can be sent, regardless of English or Chinese.
Suppose you want to send the following message: "Hello". Before sending, you need to know the SMS center number where the mobile SIM card is located. For example, China Mobile’s SMS center number:

Received mobile phone number: 13638197275
Hangzhou SMS center number: 13800571500
Content of the message: Hello
To send this text message, the phone will execute it after encoding. After encoding, it will become the following string of characters:
0891683180501705F011000D91683136187972F5000800044F60597D
If you don’t understand, please explain this string of encoding from beginning to end. :
08 – refers to the length of the SMS center number, that is, the length of (91) (683180501705F0) divided by 2, that is, 08 = (2 14) / 2
91 – refers to the SMS center number Number type. 91 means that TON/NPI complies with the International/E.164 standard, which means that a ' ' sign needs to be added before the number; there are other values, but 91 is the most commonly used.
683180501705F0 - SMS center number. Due to slight processing in position, the actual number should be: 8613800571500 (the letter F is a character added to make up the even length).
      11 - File header bytes
    00 - Message type (TP-Message-Reference)
    0D - Called number length
    91 - Called number type

In fact, in actual During processing, we usually hard-code 11000D91 in the program, because in China, these data will not change.

683136187972F5 - The called number has been shifted, and the actual number is "8613638197275".

The above (00) (0D) (91) (683136187972F5) constitutes the second part of the destination address (TP-Destination-Address) of the entire text message.

Continue...
00 - Protocol identification TP-PID, here is generally 00
08 - Data coding scheme TP-DCS (TP-Data-Coding-Scheme), using the previously mentioned USC2 (16bit) data encoding
00 - Validity period TP-VP (TP-Valid-Period)
04 - Length TP-UDL (TP-User-Data-Length), which is sixteen times the information length/2 Enter 04
4F60597D Here is the text message content, the actual content is: "Hello"

Based on the above situation, you can write the program script for text message encoding.

1. SMS center number processing:

1. Remove the numbers from the SMS center number "8613800571500" to see if the length is an even number. If not, add F# at the end. ##=> “8613800571500F”
2. Swap the odd and even digits.
=> “683108501705F0″
3. Add the character 91 in front of the SMS center number. 91 means internationalization.
=> “91683108501705F0″
4. Calculate the length and divide the result 2. Format it into a 2-digit hexadecimal string, 16 / 2 = 8 => “08″
=> “0891683108501705F0″

2. Mobile phone number processing:

1. Remove the digits from the mobile phone number 8613638197275 and see if the length is an even number. If not, add F

=> "8613638197275F" at the end
2. Delete the odd and even digits of the mobile phone number exchange.
=> “683136187972F5″

3. Short message processing:

1. Convert string to Unicode code,

“Hello "The unicode code is 4F60597D
2. Divide the length by 2 and retain two hexadecimal digits, that is, 4F60597D = 8 / 2 => "04″,
=> "044F60597D″

4. Combination

1. Add the string 11000D91 before the mobile phone number (1100: fixed, 0D: the length of the mobile phone number, not counting the + sign, expressed in hexadecimal, 91: send
to the mobile phone as 91, send to the small Lingtong is 81),
is 11000D91 683136187972F5
=> 11000D91683136187972F5
2. Add 000800 and the content of the text message just after the mobile phone number. You can also write down 000800.
is 11000D91683136187972 F5 000800 044F60597D
=> 11000D91683136187972F5000800044F60597D
3. Divide the entire message length by 2 and format it into a 2-digit decimal number
That is 11000D91683136187972F5000800044F60597D => 38 digits/ 2 => 19

5. So the content to be sent is

AT CMGF=0 #This is to set the SMS sending mode PDU
OK
AT CMGS=19< ;Enter>
> #Enter the text message content encoding

Append the final PHP code:

<?php 
// Requirement dio, use cmd install: pecl install dio 
set_time_limit(0); 
  
// Windows use COM1: 
$fd=dio_open(&#39;/dev/ttyS0&#39;, O_RDWR); 
if(!$fd) 
{ 
  die("打开串口ttyS0失败"); 
} 
  
// dio_tcsetattr() only Linux 
// Windows 使用 exec(&#39;mode COM1: baud=9600 data=8 stop=1 parity=n xon=on&#39;); 
dio_tcsetattr($fd, array( 
 &#39;baud&#39; => 9600, 
 &#39;bits&#39; => 8, 
 &#39;stop&#39; => 1, 
 &#39;parity&#39; => 0 
)); 
  
//$ff=dio_stat($fd); 
//print_r($ff); 
//echo "GSM AT is start on ttyS0\n"; 
  
//短信中心号码 
$smsc = "8613800571500"; 
$invert_smsc = invertNumbers($smsc); // 转换短信中心号码 
$inter = chr(13); // 回车字符 
  
$ctrlz = chr(26); // ctrl+z 
  
// 发送信息 
$text 
  = &#39;你好&#39;; 
$send_to = &#39;8613638197275&#39;; 
$pdu_phone = hex2str(utf82unicode($text)); 
$pdu_phone = sprintf("%02X", strlen($pdu_phone)/2) . $pdu_phone; 
$pdu_phone = &#39;11000D91&#39; . invertNumbers($send_to) . &#39;000800&#39; . $pdu_phone; 
$atcmd   = &#39;AT+CMGF=0&#39; . $inter; 
@dio_write($fd, $atcmd); 
$atcmd   = &#39;AT+CMGS=&#39; . sprintf("%d", strlen($pdu_phone)/2) . $inter; 
@dio_write($fd, $atcmd); 
$pdu_addr  = &#39;0891&#39; . invertNumbers($smsc); 
$pdu_all  = $pdu_addr . $pdu_phone . $ctrlz . $inter; 
@dio_write($fd, $pdu_all); 
dio_close($fd); 
  
// 我的是utf-8编码 
function utf82unicode($str)  
{ 
  return iconv("utf-8", "UCS-2BE", $str); 
} 
  
function hex2str($hexstring)  
{ 
  $str = &#39;&#39;; 
  for($i = 0, $len = strlen($hexstring); $i < $len; $i++) 
  { 
    $str .= sprintf("%02X", ord(substr($hexstring, $i, 1))); 
  } 
  return $str; 
} 
  
function invertNumbers($msisdn)  
{ 
  $len = strlen($msisdn); 
  if ( 0 != fmod($len, 2) ) 
  { 
    $msisdn .= "F"; 
    $len = $len + 1; 
  } 
  
  for ($i=0; $i<$len; $i+=2) 
  { 
    $t = $msisdn[$i]; 
    $msisdn[$i] = $msisdn[$i+1]; 
    $msisdn[$i+1] = $t; 
  } 
  return $msisdn; 
} 
  
?>
Copy after login

Summary:The above is the entire content of this article, I hope it will be helpful to everyone's study.

Related recommendations:

How to implement email sending in php

php ajax no-refresh message system

php file upload class example

The above is the detailed content of PHP implements the idea and specific implementation of sending text messages through the serial port. For more information, please follow other related articles on the PHP Chinese website!

source:php.cn
Statement of this Website
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn
Popular Tutorials
More>
Latest Downloads
More>
Web Effects
Website Source Code
Website Materials
Front End Template