Operation and Maintenance
Linux Operation and Maintenance
How to change the public IP address after the instance is assigned a public IP address?
How to change the public IP address after the instance is assigned a public IP address?
This article introduces how to change the public IP address after the instance is assigned a public IP address, and focuses on the steps to change the public IP address.
Change the public IP address
If your instance is assigned a public IP address, whether it is a classic network or a private network (VPC), you can change it within 6 hours after creation Public IP address.
Restrictions
There are the following restrictions on changing the assigned public IP address:
The instance must be assigned a public IP Address, that is, in the instance list, the IP address column of the instance will display the public IP address, as shown in the figure below.
Description
If no public IP address is assigned when creating a prepaid instance, after the instance is successfully created, you can configure the allocation by increasing or decreasing the public network bandwidth. Public IP address. For more information, please refer to the configuration upgrade and downgrade overview.
If no public IP address is assigned when creating a pay-as-you-go instance, after the instance is successfully created, you cannot assign a public IP address and can only bind an elastic public IP (EIP) address.
The instance must be in stopped state.
Less than 6 hours after the instance was created.
Description
After 6 hours, the VPC instance can change the public IP address through the public IP to elastic public IP function. Classic network instances can no longer change the public IP address.
Each instance can only change the public IP address up to 3 times.
Prerequisites
You must stop the instance before changing the public IP address.
Operation steps
Follow the following steps to change the public IP address:
Log in to the ECS management console.
In the left navigation bar, click Instances.
Select a region.
Find the instance of changing the public IP address. In the Operation column, select More > Change public IP.
Description
If it has been more than 6 hours since your instance was created, the Change Public IP option will not be displayed on the console.
In the Change Public Network IP dialog box, click to start the change.
After the replacement is successful, the dialog box will display the new public IP address, as shown in the figure below.
Click OK to close the dialog box.
Related operations
You can modify the private IP address, but you cannot modify the private IP address of the classic network instance.
The above is the detailed content of How to change the public IP address after the instance is assigned a public IP address?. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Undress AI Tool
Undress images for free
Clothoff.io
AI clothes remover
AI Hentai Generator
Generate AI Hentai for free.
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Hot Topics
1378
52
What is Linux actually good for?
Apr 12, 2025 am 12:20 AM
Linux is suitable for servers, development environments, and embedded systems. 1. As a server operating system, Linux is stable and efficient, and is often used to deploy high-concurrency applications. 2. As a development environment, Linux provides efficient command line tools and package management systems to improve development efficiency. 3. In embedded systems, Linux is lightweight and customizable, suitable for environments with limited resources.
How to start apache
Apr 13, 2025 pm 01:06 PM
The steps to start Apache are as follows: Install Apache (command: sudo apt-get install apache2 or download it from the official website) Start Apache (Linux: sudo systemctl start apache2; Windows: Right-click the "Apache2.4" service and select "Start") Check whether it has been started (Linux: sudo systemctl status apache2; Windows: Check the status of the "Apache2.4" service in the service manager) Enable boot automatically (optional, Linux: sudo systemctl
What to do if the apache80 port is occupied
Apr 13, 2025 pm 01:24 PM
When the Apache 80 port is occupied, the solution is as follows: find out the process that occupies the port and close it. Check the firewall settings to make sure Apache is not blocked. If the above method does not work, please reconfigure Apache to use a different port. Restart the Apache service.
How to monitor Nginx SSL performance on Debian
Apr 12, 2025 pm 10:18 PM
This article describes how to effectively monitor the SSL performance of Nginx servers on Debian systems. We will use NginxExporter to export Nginx status data to Prometheus and then visually display it through Grafana. Step 1: Configuring Nginx First, we need to enable the stub_status module in the Nginx configuration file to obtain the status information of Nginx. Add the following snippet in your Nginx configuration file (usually located in /etc/nginx/nginx.conf or its include file): location/nginx_status{stub_status
How to start monitoring of oracle
Apr 12, 2025 am 06:00 AM
The steps to start an Oracle listener are as follows: Check the listener status (using the lsnrctl status command) For Windows, start the "TNS Listener" service in Oracle Services Manager For Linux and Unix, use the lsnrctl start command to start the listener run the lsnrctl status command to verify that the listener is started
How to set up a recycling bin in Debian system
Apr 12, 2025 pm 10:51 PM
This article introduces two methods of configuring a recycling bin in a Debian system: a graphical interface and a command line. Method 1: Use the Nautilus graphical interface to open the file manager: Find and start the Nautilus file manager (usually called "File") in the desktop or application menu. Find the Recycle Bin: Look for the Recycle Bin folder in the left navigation bar. If it is not found, try clicking "Other Location" or "Computer" to search. Configure Recycle Bin properties: Right-click "Recycle Bin" and select "Properties". In the Properties window, you can adjust the following settings: Maximum Size: Limit the disk space available in the Recycle Bin. Retention time: Set the preservation before the file is automatically deleted in the recycling bin
How to restart the apache server
Apr 13, 2025 pm 01:12 PM
To restart the Apache server, follow these steps: Linux/macOS: Run sudo systemctl restart apache2. Windows: Run net stop Apache2.4 and then net start Apache2.4. Run netstat -a | findstr 80 to check the server status.
How to optimize the performance of debian readdir
Apr 13, 2025 am 08:48 AM
In Debian systems, readdir system calls are used to read directory contents. If its performance is not good, try the following optimization strategy: Simplify the number of directory files: Split large directories into multiple small directories as much as possible, reducing the number of items processed per readdir call. Enable directory content caching: build a cache mechanism, update the cache regularly or when directory content changes, and reduce frequent calls to readdir. Memory caches (such as Memcached or Redis) or local caches (such as files or databases) can be considered. Adopt efficient data structure: If you implement directory traversal by yourself, select more efficient data structures (such as hash tables instead of linear search) to store and access directory information
