How to enter safe mode when booting win10?

The methods to enter safe mode in win10 are: 1. Press the F8 key when booting; 2. Configure through the "Settings" option; 3. Set through the "Power" option; 4. Set through the "System Configuration". The following article will introduce it in detail, I hope it will be helpful to everyone.

The methods to enter safe mode in win10 are:

Method 1. Press f12 on the keyboard when booting key or f8, different computers will be different.

Method 2: Configure through the "Settings" option

1. Click the "Start" button of Win10——>Continue to click the "Settings" option to open it, as follows As shown in the figure.

2. Click the "Update and Security" option to open it, as shown in the picture below

3. Click "Restore" ”——>Click “Restart Now” under the “Advanced Startup” option on the right, as shown in the figure below

4. The system automatically enters the safe operation interface, click “ Troubleshooting"

5. Click "Advanced Options"

6. Click "Startup Settings"

7. Click the "Restart" button, and then your Win10 computer will restart.

8. After restarting, the interface as shown below will appear. At this time, you can enter different types of safe modes by pressing F4, F5, and F6 on the keyboard.

At this time, press F4 to enter the safe mode of Win10

Method 3. Set it through the "Power" option

Click the "Start" button of the Win10 system——>Click the "Power" option——>At this time, hold down the Shift key and then click "Restart"

Then the system automatically enters the security operation interface, click "Troubleshooting".

#The next steps are the same as "Method 2", so they are omitted here.

Method 4: Set through "System Configuration"

1. Press the shortcut key "Win R" or right-click the start menu button and select [Run]. First open the Win10 running program, and then enter the command: msconfig during running.

#2. Switch to the boot tab.

3. Under the "Boot" option, check "Safe Boot" ->Click "OK", as shown in the figure below

4. Click "Restart". Win10 will then restart and automatically enter safe mode after the restart.

Important Note:

(1). After performing relevant maintenance operations in the safe mode of Win10, you need to open the "System Configuration" option of Win10 again. Then click "General" -> Click "Normal Start" -> Click "OK". Maintenance completed, reset Win10 to start normally

(2), click "Restart"

The above is the entire content of this article, I hope it will be helpful to everyone's study. For more exciting content, you can pay attention to the relevant tutorial columns of the PHP Chinese website! ! !

The above is the detailed content of How to enter safe mode when booting win10?. For more information, please follow other related articles on the PHP Chinese website!