Which brand of router is better?
With the popularity of mobile phones and the improvement of mobile Internet speeds, mobile Internet access has become more and more indispensable. Although 4G packages have been reducing prices and unlimited traffic has been launched in batches, the limit of unlimited traffic is 20G or 40G. Exceeding the speed limit is also an indisputable fact. So for now, wireless WIFI is still an essential option. When it comes to wireless WIFI, we have to mention the router that is closely related to it.
Router
PHP video tutorial.)
1.TPLINK (Pu Lian) router, TPLINK is well-known in the domestic market and stores, and its prices are relatively transparent. Currently, it mainly uses two or three antennas.
TPLINK2 antenna transmission speed is 300M, and the three-antenna transmission speed is 450M. Many people think of 300M and 450M as 300 meters and 450 meters, which means that the transmission distance covered by the router is 300 meters or 450 meters. M, this understanding is wrong. 300M and 450M refer to the transmission speed. The editor has used both of these two models several times. To be honest, after using them for half a year or more than a year, the routing WIFI signal will become slow, and the signal may be stuck for a while, especially the antenna problem is more obvious. If you want to continue For normal use, basically turn off the power once a week and let the router rest before using it again. The usage effect will be improved. Everyone should know that whether it is 2 antennas or 3 antennas, if the place of use is more than two walls (including two walls) away from the router, the signal will basically be lost. If you are ready to buy this brand, it is highly recommended to buy a four-antenna 1,000M port router. Because with the increasing speed of broadband, 100M and 200M broadband have become very common. 2-antenna and 3-antenna routers can no longer exert the actual effect of broadband. Pay special attention to buying 1,000M ports.2. Tenda router. One of the biggest advantages of Tenda routers is that they are cheap, but there is indeed a certain gap between the use effect and TPLINK. After all, the price is nearly half cheaper. If you buy this brand of router, be sure to pay attention. Tenda has several models with many antennas. Cheap, but the signal is not much enhanced. Multiple antennas are more of a psychological comfort.
3. Mercury router. This is not recommended because I have experienced unstable signals and disconnections when using new routers.
4.DLINK (Youxun) router, The effectiveness of this router brand is not worse than TPLINK, but I don’t know if it is due to marketing and marketing reasons, but its market share is much lower than that of TPLINK. TPLINK.
5. NETGEAR, Not many people may have heard of this brand, mainly because it is expensive, with third-tier products costing four to five hundred, but the use effect and stability Good performance, after all, you get what you pay for.
Summary: When buying a router, you must first look at the brand. This is the most important thing. After choosing the brand, you can then decide how many wires to use. It is recommended to use 4 antennas. If the broadband is above 50M, it is recommended Choose a router with 1,000M ports.
The above is the detailed content of Which brand of router is better?. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics



The sys of the router means system operating status indication, and the full name is System; the router uses the sys indicator light to inform the user of the operating status of the device. If the router is faulty or restarting, the indicator light will flash; the indicator light of the router can be divided into power Indicator light, sys system indicator light, LAN indicator light and WAN indicator light.

Can. However, you need to pay attention to some issues: 1. Placing the router upside down may have a certain impact on heat dissipation, causing heat to accumulate at the bottom of the router, affecting the heat dissipation effect. Long-term overheating may reduce the performance of the router and adversely affect its lifespan. ; 2. Placing the router upside down may affect the operation and management of the device, and the indicator lights and interfaces may be blocked or inconvenient to operate; 3. Placing the router upside down may also have a certain impact on network security, and the default user name and password may cause This information is more susceptible to prying eyes.

In routers, sn stands for "Serial Number", which means "serial number" and refers to the factory number of the router. The router serial number (SN) and physical address are both hardware identifiers, which are unique; the router will be under warranty only if the router's serial number is kept intact. The router serial number SN can be seen directly in the manual and on the back of the router.

Students who know computers all know that if our computer wants to connect to the network, it must have an IP address. This IP address can be manually configured, such as 172.16.19.20; it can also be automatically obtained by the DHCP server of the computer network card, such as 192.168.1.100 etc. These IP addresses are what we often call IPV4 addresses, and the corresponding IPV6 is also a type of IP address. What is IPV6 IPV6 is a new IP address that emerged in response to the exhaustion of IPV4 address resources. Its full name is "Internet Protocol Version 6", and its Chinese name is the sixth generation of Internet Protocol. The number of IPv6 addresses is theoretically 2^128

The first light is on, indicating that the router is powered on. Which port is plugged in, the light of which port is on, and flashing means data is being transmitted. Wireless routers usually have three indicator lights: SYS, LAN and WAN. When the wireless router is powered on, the SYS light will light up. When the wireless router is connected to the network modem, the WAN light will light up. The LAN light corresponds to each interface of the wireless router. As long as the network cable is inserted into the corresponding interface, the corresponding LAN light will light up. 1. If it keeps flashing, it means it is transmitted by data, and the router settings should be normal. 2. If you have always been able to access the Internet, but you can't get online recently; it is probably a problem with the external line, that is, a problem with the operator (usually there is a problem with the line, causing the data signal to attenuate too much, although the line is good)

Reasons why the router is connected but cannot access the Internet: 1. Internet service provider problem; 2. Router setting problem; 3. LAN problem; 4. WiFi signal problem; 5. Router hardware problem; 6. DNS problem; 7. Network cache problem ; 8. Firewall and security software issues; 9. Operator restrictions; 10. Equipment failure. Detailed introduction: 1. Internet service provider problems. This is a common reason. Internet service providers may have problems, such as network interruption or service interruption; 2. Router setting problems, etc.

The impact of turning off dhcp on the router: 1. The client cannot automatically obtain an IP address; 2. The IP address needs to be configured manually; 3. It may cause network connection problems; 4. It affects the communication of network devices; 5. IP address conflicts; 6. Unable to proceed Dynamic address allocation; 7. Network isolation cannot be performed; 8. Traffic control cannot be performed; 9. Access control cannot be performed. It is recommended that before turning off the DHCP service, carefully consider whether it really needs to be turned off, or keep the DHCP service to ensure that the client can automatically obtain the correct IP address.

The difference between gateway WiFi and router WiFi is mainly reflected in three aspects: function, number of terminals that support Internet access, and WiFi signal coverage. Gateway WiFi is a combination of optical modem and router. It has more functions, but it supports fewer Internet devices and the WiFi signal coverage is not as good as router WiFi.