win10 hard disk usage 100

Netizens often complain that their Win10 is running too slowly. When they open the Task Manager, they see that the disk usage is 100%. In fact, this problem is very common in Win10, and almost every computer has encountered similar embarrassment. So how do we prevent the hard disk from occupying 100%? Today I will give you some tips.

1. Turn off diagnostic tracking (recommended learning: PHP video tutorial)

Diagnostic tracking (DiagTrack ) is a new feature added in Win8. 1. It is mainly used to collect PC information to help Microsoft track and improve its products (Windows).

Unfortunately, this service consumes system resources and does not have much practical value for ordinary users.

Close method:

Click the Cortana search box and enter "services" to enter the service panel;

Enter "diag" and you will see Go to the four service items starting with "Diagnostic";

Double-click to open them in sequence, and change the startup type to "Disabled", and close the above four groups of service items;

Same method to modify" Connected User Experiences and Telemetry", set its startup type to "Disabled";

2. Modify to balanced power mode

This problem often occurs in In a system with a mechanical hard drive or a mix of mechanical hard drives and solid-state drives, the phenomenon is also that the hard drive is 100% occupied.

Solution:

Open "Settings"→"System"→"Other Power Settings";

Modify the default power plan to "Balanced" ;

3. Win10 update ing

The editor has been troubled by this problem many times. The system that was originally well optimized has been found to be abnormally stuck during work. Later, I discovered that Win10 was automatically updating. This problem especially occurs among users who have joined the Windows Insider program.

The solution is also very simple, either change back to slow mode and reduce the frequency of automatic updates of Win10, or directly exit the Windows Insider Program and only update manually for major versions. And this situation is actually more suitable for those productivity equipment.

4. Try to optimize the driver

Win10 can handle most hardware, so many people ignore the need to install the driver after installing the system, especially It is a SATA driver. Win10 often uses a more stable driver to support it, but it may cause various problems.

If your computer often freezes but the problem cannot be found for a long time, then you can consider this reason. Download a driver wizard or driver master, and then try to upgrade the driver according to the software recommendations.

5. 4K alignment and SATA mode

This problem mainly occurs among solid-state drive users. If your computer uses an SSD, you can’t feel it in daily use. If the speed is obviously increased, then you can consider whether the hard disk is 4K misaligned.

In layman’s terms, 4K alignment means that the hard disk and the operating system share the same storage standard to avoid data being split multiple times. The complete 4K alignment is actually divided into two parts, partition alignment and whether AHCI mode is turned on in the BIOS.

6. Increase physical memory

Although Microsoft has always claimed that Win10 does not have high memory requirements, in fact, when the 4GB system and the 8GB system run the same version of Win10 , the speed is absolutely different.

If your memory is less than 4GB (or smaller), it is better to add a new memory to the computer as soon as possible. With the current memory price, it is a good time to make a move (quietly, dual-channel performance Higher ha~).

7. Turn off Windows Search and SuperFetch on mechanical hard disk

If your computer uses a mechanical hard disk, it is recommended to turn off Windows Search and SuperFetch services, because this These two services will significantly increase the daily reading and writing of the hard disk, causing system response lags.

But for solid-state drive users, there is no need to worry about this. First of all, the response speed of solid-state drives is very fast, and even reading and writing will have little impact on other work.

Another point is that Windows Search and SuperFetch are essentially system optimization services, and long-term use can make the system faster.

Close method:

Click the Cortana search box, enter "Services" to enter the service panel;

Search for "sysmain" and double-click to open it. And change the startup type to "Disabled" (for older versions of Win10, please search for the "Superfetch" service);

Treat "Windows search" in the same way, double-click and change the startup type to "Disabled";

For more PHP related technical articles, please visit the PHP Graphic Tutorial column to learn!

The above is the detailed content of win10 hard disk usage 100. For more information, please follow other related articles on the PHP Chinese website!