How to set up dhcp

How to set up dhcp

The main function of the DHCP server is to apply for and allocate IP addresses to each computer in the LAN manage. Through the router or network host that assumes this responsibility.

Let’s take a look at the specific setting method.

Method/Step

Open the browser, enter the login address, and log in to the router management interface. Then enter your username and password to log in.

Click on the "DHCP Server" option and then check "Enable DHCP Server". Then enter the "Address Pool Start Address" and "Address Pool End Address". (The settings of these two parts must be in the same network segment as the router)

After the settings are completed, click the "Save" button, and then restart the router to take effect.

Next, you need to set up the computer side:

Open the "Control Panel", click "Network and Sharing Center" → "Adapter Settings" button.

Then right-click "Local Area Connection" and select "Properties". In the window that opens, find and double-click the IPV4 protocol.

Just check "Obtain IP address automatically" and "Obtain DNS server automatically" at the same time. At this point, the DHCP server configuration is completed.

The above is the detailed content of How to set up dhcp. For more information, please follow other related articles on the PHP Chinese website!