Reasons why the hard disk temperature is too high

The normal working temperature of the hard disk is considered normal between 40-50 degrees, and the working temperature limit should be less than 70 degrees. When the temperature of the hard disk reaches about 100 degrees, the hard disk will be damaged and cause data loss. In severe cases, the hard disk will be damaged. under normal circumstances. The working temperature of the hard drive will be 10-20 degrees higher than the indoor temperature. It may reach 60-70 degrees in summer and only about 30-40 degrees in winter. The normal operating temperature of general IDE hard drives is about 30-50 degrees.

#In the process of operating the computer, we often encounter the phenomenon that the hard disk temperature is too high. The reasons include software factors and hardware factors. The main cause caused by software is that programs frequently read and write to the hard disk, while the cause caused by hardware involves many aspects. (Recommended learning: PHP video tutorial)

A certain program frequently reads and writes to the hard disk

Right-click the blank space of the taskbar. Click "Task Manager" in the open right-click menu or directly press "Ctrl Alt Del" key combination to call up the Task Manager

Switch to the "Processes" tab and observe which program takes up the most CPU. Right-click to end This process

Note:Usually anti-virus software is the culprit that causes frequent hard disk reading and writing

A program that logs in with the system at the same time

There are too many startup programs when the system starts. When the system enters the desktop, these programs will also be started. Then too many startup programs will cause frequent reading and writing of the hard disk, which will also cause the hard disk temperature to be too high.

Click the "Start" menu, click the "Run" command, type the "msconfig" command in the "Open" box, and click the "OK" button

Open the "System Configuration Utility" window, switch to the "Startup" tab, remove the check boxes for the unnecessary startup items below, and then click the "OK" button

hardware cooling

Maximum The reason is caused by too much dust in the case. You can add a cooling fan to the case or install a hard disk fan. However, I think it is necessary to install a case fan. This can also cool down other firmware, especially in the summer to ensure the safety of the computer. It runs stably. Many of my friends’ machines have burned out their hardware in the summer due to poor chassis heat dissipation. Too high a hard drive temperature will cause system paralysis. If the heat dissipation inside the chassis is not good, clean the dust in the chassis. The biggest reason for hardware heat dissipation is the dust in the chassis. If it is caused by too much, you can add a cooling fan to the case or install a hard disk fan. However, I think it is necessary to install a case fan, which can also cool down other firmware, especially in summer, to ensure the safe and stable operation of the computer.

For more PHP related technical articles, please visit the PHP Graphic Tutorial column to learn!

The above is the detailed content of Reasons why the hard disk temperature is too high. For more information, please follow other related articles on the PHP Chinese website!